FN SPR
- Thread starter Benhonda
- Start date
Personally I would put it through it's paces first to evaluate if anything needs any further attention.
From what I recall the hammer forged barrels they used were pretty damn good, if anything I would think the bedding may need some attention but even that is just a guess and may not need any further action.
The most personal preference aspect will most likely be the trigger everyone has thier own take on that.
I say shoot it and then make an assessment before formulating a plan to pick it appart.
From what I recall the hammer forged barrels they used were pretty damn good, if anything I would think the bedding may need some attention but even that is just a guess and may not need any further action.
The most personal preference aspect will most likely be the trigger everyone has thier own take on that.
I say shoot it and then make an assessment before formulating a plan to pick it appart.
Are the FN SPR enthusiasts extinct?
I have owned an FN SPR A1 for over a decade. It’s been the best rifle I have ever owned. It’s Topped with the older NF with the NPR2 reticle. I always enjoy getting behind it and cutting sub Half MOA groups or dropping deer in their tracks. After the first year I called FN to check the serial...
www.snipershide.com
^ This. Start reading and enjoy.Are the FN SPR enthusiasts extinct?
I have owned an FN SPR A1 for over a decade. It’s been the best rifle I have ever owned. It’s Topped with the older NF with the NPR2 reticle. I always enjoy getting behind it and cutting sub Half MOA groups or dropping deer in their tracks. After the first year I called FN to check the serial...
Generally, an M*Carbo trigger return spring and bedding is about all you can do at home yourself.
Winchester Model 70 Trigger Spring Kit
Trigger Spring Kit for the Winchester model 70 featherweight and all other Model 70 variations with the standard Winchester Model 70 Trigger Pre-2008 production. Compatible with all calibers to include the Winchester model 70 30-06 and Winchester...
www.mcarbo.com
They are going to be an honest sub-MOA shooter. I have three, but two have been rebarreled to 6.5x47.
Good rifles. The proprietary mags are harder to get now but they are brilliant.
Just be aware that sometimes the chrome lining can flake away and destroy your accuracy. If you are struggling to get it to shoot, that's the problem, get a new barrel.
The trigger out of the box is awful. For a rifle of this class to have such a poor trigger is a crime. It's creepy, inconsistent and heavy. Replace the trigger or get a competent smith to tune it up for you (usually just a set screw and a new spring).
The scope base is WEAVER ONLY on the A5Ms. Picatinny rings won't fit. Chase a new scope base or use Leupold Mark 4 rings.
I bought mine as my first proper precision rifle and it drove me insane. I still find it a difficult rifle to shoot well compared to my others, but because it was such a chore and I had to fault find so much, I learned a lot faster than I felt I otherwise would have. Its the gun I take out now when I want to try new things or test my fundamentals because out of all the guns I own, the A5M is the one that will punish me the most for my poor fundamentals. I hated it for years but now have a real soft spot for it. I'll never sell it.
Just be aware that sometimes the chrome lining can flake away and destroy your accuracy. If you are struggling to get it to shoot, that's the problem, get a new barrel.
The trigger out of the box is awful. For a rifle of this class to have such a poor trigger is a crime. It's creepy, inconsistent and heavy. Replace the trigger or get a competent smith to tune it up for you (usually just a set screw and a new spring).
The scope base is WEAVER ONLY on the A5Ms. Picatinny rings won't fit. Chase a new scope base or use Leupold Mark 4 rings.
I bought mine as my first proper precision rifle and it drove me insane. I still find it a difficult rifle to shoot well compared to my others, but because it was such a chore and I had to fault find so much, I learned a lot faster than I felt I otherwise would have. Its the gun I take out now when I want to try new things or test my fundamentals because out of all the guns I own, the A5M is the one that will punish me the most for my poor fundamentals. I hated it for years but now have a real soft spot for it. I'll never sell it.
Supposedly Chad @LRI Was coming up with an Aics for m70 rifles. I'm not sure if that will come to fruition or just a myth.
I wanna say that has been "in development" for about half a decade now. So I wouldn't hold my breath.
This is real life now... I know you know this @stello1001, but for those who don't:
LRI DETACHABLE BOTTOM METALS
The LRI DBM works by presenting as much case rim as possible to the bolt face on both a push-feed or controlled round-feed operating system. We refer to this as the "figure 8". The installed height of the action/DBM is set so the case rim lands tangent to the 6 o'clock position of the receiver...
www.longriflesinc.com
