KRG Bravo Pic Thread
- Thread starter Rockdoc173
- Start date
-Stiller TAC300 action
-MPA barrel and brake
-Triggertech diamond trigger
-KRG Bravo with krg arca rail
-Leupold mark 5 5x25
-300wm with 215 hybrids hand loaded at 3000fps
-MPA barrel and brake
-Triggertech diamond trigger
-KRG Bravo with krg arca rail
-Leupold mark 5 5x25
-300wm with 215 hybrids hand loaded at 3000fps
-Remington 700 SPS Varmint action
-IBI barrel
-Timney Two-Stage Trigger (great for shooting with gloves!)
-Athlon Midas Tac 6-24
-77gr SMK handloads
-IBI barrel
-Timney Two-Stage Trigger (great for shooting with gloves!)
-Athlon Midas Tac 6-24
-77gr SMK handloads
First real bolt action "build".
22" Med Palma 223 Wylde Hawk Hill barrel and Origin action from Blue Mountain Precision.
Burris XTR2 4-20
Hawkins Rings
Atlas Gen2 Cal
TT Special
Sako Green Bravo
Surefire MB556k/ FA556-212
15.5lbs with the can and an empty mag.
Just your everyday Basic Bitch rifle.
Going to shoot it tomorrow for the first time.
(Need to take some better Pics)
22" Med Palma 223 Wylde Hawk Hill barrel and Origin action from Blue Mountain Precision.
Burris XTR2 4-20
Hawkins Rings
Atlas Gen2 Cal
TT Special
Sako Green Bravo
Surefire MB556k/ FA556-212
15.5lbs with the can and an empty mag.
Just your everyday Basic Bitch rifle.
Going to shoot it tomorrow for the first time.
(Need to take some better Pics)
My Dad's Tikka in a KRG bravo that my 6yo did the sponge camo on
Rem 700 varmint 223 8t 26"
Sako greeb bravo
krg mags
Arken epl4 4-16, arken low rings
Yhm t3
Sako greeb bravo
krg mags
Arken epl4 4-16, arken low rings
Yhm t3
For anyone with a Bravo chassis and a 22-24" barrel, what kind of hard case are you using since the chassis doesn't fold? Thanks in advance.
Most of the pics show stocks with non adjustable stocks concerning height of the butt pad. Any issues with those? Looking for training rifles for students and currently favour the KRG Bravo/Whiskey 3.
Thanks for any Info in advance!
Cheers
Thanks for any Info in advance!
Cheers
Yup, didnt know you could adjust them with the basic version. Thank you very much!
I listen to the podcast and I've been eyeing the vision hand guard/front end since l heard you talk about it.
Hit the bravo/alimunum w3 forened with a green copper color changing paint yesterday
Edit: swapped some stuff around
Edit: swapped some stuff around
Last edited:
Odd question maybe not the correct place either but has anyone drilled out the front action screw access hole on the plastic forend piece so you have access to the front screw to be able to pull it completely out? If so have you had any issues with that forend piece at all?
First build on krg Bravo and o feel I’m not loosing much to more expensive chassis. You can upgrade so much from KRG and otherwise that it’s awsome to be able to do as budget allows. So versatile.
One of my PRS builds currently is .223 trainer:
KRG bravo, Burris xtr III. Shilen NSS bull .223 vld. Rifle basix target. Love this build great foray into customs.
One of my PRS builds currently is .223 trainer:
KRG bravo, Burris xtr III. Shilen NSS bull .223 vld. Rifle basix target. Love this build great foray into customs.
Attachments
My Bergara B14R in a Bravo chassis with Next Shot Precision Alpha forend, which is awesome!
It's fantastic. Gives you a full billet aluminum forend that is about 15" long and has an integral arca rail, MLOK slots on both sides and the bottom, flush cups, accepts the long (XL) internal KRG t-slot weight and still allows the use of KRG NV bridges. Weighs about 2lbs so helped with the balance some too (and I added some XLR forend weights). It really feels like a legit chassis now, with the rear ergos of a more traditional stock. I'm really happy with it so far on my rimfire. Was able to balanced the 20" barrel perfectly.
NSP Alpha Forend for KRG Bravo, X-Ray, and Whiskey 3
NSP Alpha Forend for KRG Bravo and Whiskey
www.nextshotprecision.com
It's fantastic. Gives you a full billet aluminum forend that is about 15" long and has an integral arca rail, MLOK slots on both sides and the bottom, flush cups, accepts the long (XL) internal KRG t-slot weight and still allows the use of KRG NV bridges. Weighs about 2lbs so helped with the balance some too (and I added some XLR forend weights). It really feels like a legit chassis now, with the rear ergos of a more traditional stock. I'm really happy with it so far on my rimfire. Was able to balanced the 20" barrel perfectly.
NSP Alpha Forend for KRG Bravo, X-Ray, and Whiskey 3
NSP Alpha Forend for KRG Bravo and Whiskey
View attachment 8586997
Awesome, thank you. I was thinking about the new krg forend for my bravo, but this sounds better.
24" CTR in 6.5 CM
Harris BRM-S
TBAC Ultra 9
15.6 lbs with loaded mag.
Harris BRM-S
TBAC Ultra 9
15.6 lbs with loaded mag.
Tikka T3X, Proof 22” 6.5 Creed, K525i DLR, Ckyepod lightweight double pull, Bravo cerakoted by Custom Gun Coatings
That is a Hoptic Saddle blanket.
KRG Whiskey X-Ray and Bravo | hoptic
KRG Saddle BlanketsFits: Whiskey 3 or X-Ray and BravoThe Bravo edition has a shape and cut that is compatible with many other Stocks and Chassis!1/8" Polethylene Padded Cheek Rest AppliqueLaser cut for a perfict form fit.Each Purchase includes two Saddle Blankets$14.99
www.hopticusa.com
Any idea how this compares to the Vision forend for KRG?It's fantastic. Gives you a full billet aluminum forend that is about 15" long and has an integral arca rail, MLOK slots on both sides and the bottom, flush cups, accepts the long (XL) internal KRG t-slot weight and still allows the use of KRG NV bridges. Weighs about 2lbs so helped with the balance some too (and I added some XLR forend weights). It really feels like a legit chassis now, with the rear ergos of a more traditional stock. I'm really happy with it so far on my rimfire. Was able to balanced the 20" barrel perfectly.
NSP Alpha Forend for KRG Bravo, X-Ray, and Whiskey 3
NSP Alpha Forend for KRG Bravo and Whiskey
View attachment 8586997
It’s pretty similar. The main differences from what I can tell is the Alpha is longer than the Vision, but the vision has a larger barricade stop and an adjustable mag well.
Solus pva 22creed, working over nuisance permit does. 75gr eldm@3450 is a lightning bolt on does. Wears a dmr2pro now, replaced the old mk4.
I see you used paracord for your rear sling mount. I’m thinking of doing that as well plus a BFG uloop, as if I use a QD push button the thing hits me in the jaw!
Anyway, mind sharing any tips or tricks with either the knot you used or the diameter or type of cord?
Move your rear QD socket to the other side. I prefer the way the rifle carries on the sling that way, and it also keeps the sling swivel away from your face.
Perhaps I should’ve mentioned how I carry. How do you carry your rifle?
I don’t patrol carry, I like across the chest, muzzle up, gun on my back. Not sure your solution would work in that scenario, but I’ve never tried it.
I also use a Tab biathlon sling, and I’m also pretty sure your solution wouldn't work there either.
In any case, thanks for trying to help; I appreciate it!
I typically carry mine on a Magpul MS-1, muzzle down on my strong side, sling across my chest/over the weak side shoulder.
hmmm that’s a new one to me. I could see your rear attachment method working with that.
I went searching for an all-encompassing rifle sling carry style chart and came up empty. Weird.
I started carrying mine that way after hearing Caylen from Modern Day Sniper talk about carrying that way to maintain muzzle control and awareness while walking around with a rifle and a backpack and other hunters with him. I often have my (mostly clueless) 11 year old son with me in the woods, and I do feel like carrying this way helps me keep the muzzle oriented where he won't aimlessly walk in front of it. The trade off is that I have to pay attention to avoid jabbing the muzzle into the ground or banging it against rocks, logs, etc.
