Ingenuity Powder System
- Thread starter Jsstalli
- Start date
I have one of the last V3's that Adam shipped and, along with the IP trickler, it is a great piece of gear.
There is also a Creedmoor Sports TRX925 for weighing cases and other general tasks and a spare FX120i just waiting for the IP Powder Meter System.
It’s very well worth to consider getting Paul’s V3 upgrade as well ( housing, electronics and cup) if you don’t have them already.
After all it’s just money, right?
I really like that V3 upgrade and had it been available when I bought my IP Powder Meter I would have gotten it.It’s very well worth to consider getting Paul’s V3 upgrade as well ( housing, electronics and cup) if you don’t have them already.
After all it’s just money, right?
If I could buy a few parts and pieces, like the small platen for example, I would consider.
It's my understanding the new system will incorporate a lot of this.
I recently got the upgrades for the V3 and IP trickler…. Absolutely fantastic! It makes the V3 plus IP run 20-50% faster. The keypad controller is fantastic.It’s very well worth to consider getting Paul’s V3 upgrade as well ( housing, electronics and cup) if you don’t have them already.
After all it’s just money, right?
I recently acquired the full V3 system from ingenuity, to work in unison with their trickler I've had for a while. I also received his wiring harness. How does this integrate into the FX120I scale? The harness has a main plug that doesn't interface with anything on my scale, when I plug his power cable into my scale, the scale doesn't power up. What am I doing wrong here? Do I need remove the auto trickler circuit board from the back my scale? This is what my system looks likes if anyone is curios. Not my photos, but I have the same setup.
Looking at the photo, I think I'm missing the keypad which probably controls the whole system.
I emailed ingenuity but didn't get a response back.
EDIT: Paul from Ingenuity reached out and informed me a second package was on the way with the keypad/controller. He was out of stock at current location and it was delayed. I was unaware of multiple packages coming.
Looking at the photo, I think I'm missing the keypad which probably controls the whole system.
I emailed ingenuity but didn't get a response back.
EDIT: Paul from Ingenuity reached out and informed me a second package was on the way with the keypad/controller. He was out of stock at current location and it was delayed. I was unaware of multiple packages coming.
Last edited:
Yes. Take off the AT board. The power source included from IP powers the key pad, thrower, and meter. The AT power source powers the scale.
Its running with AT electronics luckily. I didn't get a key pad for some reason. I'll get one coming. Thanks @Cascade Hemi
I don't think you can use the IP harness without the keypad. The keypad is what makes the IP system great.
You are correct, the larger pin ct serial plug interfaces with key pad, and the smaller pin count plug goes into the rear the scale. Obviously lights and power are relatively simple. I hadn't saw the keypag with harness installed prior to me sourcing that photo for my post above, figured out my issue pretty quickly at that point.
I got my upgraded trickler mount a couple days ago. Because I’m an idiot, I didn’t order a cup with it.
Powder bounces out of the aluminum cup….
I’ve asked about the electronics and the draft shield, platen, etc.
Powder bounces out of the aluminum cup….
I’ve asked about the electronics and the draft shield, platen, etc.
You need Paul's cup. It's brilliant.... powder does not bounce out if it.
You still got another 12 months.
Sorry...just couldn't help myself! hahahaha
Just picked up the power meter to run with my V3 and the cup. I am in the preorder for the
IP dropper and rest but am in no rush.
I would like to get the keypad controller for sure as I like to use my phone for other things
like streaming shows when loading.
I am a little late to the power meter and have only just discovered it.
IP dropper and rest but am in no rush.
I would like to get the keypad controller for sure as I like to use my phone for other things
like streaming shows when loading.
I am a little late to the power meter and have only just discovered it.
I'm totally content with his hardware, electronics and 3d printed mounts to use my v3 thrower with his trickler. Avg charge time is 6.7-8.0 seconds. His dropper is likely better, but it's not gonna be that much better.
His dropper is (going to be
) the only thing available in this class since V3's are no longer made.
Yeah I would be totally fine with a reliable V3/tricker/upgrade package but since the V3 is an unobtainable entity, I will endeavor to persevere.His dropper is (going to be
I wish Adam would have listened to feedback and kept the V3. I’m to the point in my shooting cadence that I want things to go faster and 2 AutoTrickler type systems to make that happen. Which now means waiting on 2 IP systems. I’m happy with the 1 V3 + IP for now.
A single v3 with the Ingenuity system drops a charge as fast as I can seat a bullet in the previous filled case, how much faster do you need? Are you loading multiple chamberings at once?
I want to be constantly dropping powder. 2 is needed for that.
I am with Jay Thor on this. I do things in stages. Otherwise I get distracted and I like to be so busy dropping powder that that is all I can keep up with. If I have a couple of seconds between drops, I will place the bullets at top the loaded cases.
That and most local matches and some 2 day matches my wife is shooting also; so I’m loading between 200-500 the night before. She in that case can dump powder while I seat bullets. Otherwise yeah, I’d rather do one operation at a time.
I actually find the price surprisingly reasonable. At $1900 it is inline with what many sell for commercially.
Exactly (now 9 days). So, since the website still says "May" (of this year
), has anyone heard the new date he's projecting? It seems like most of the time he posts that info on sites other than this one when he does.
Not making excuses for him. But this has been par the course for every pre order I have been apart of on this website. Actions, powder drop, etc. it’s almost as if it’s the industry standard.Exactly (now 9 days). So, since the website still says "May" (of this year
Typically, he projects one quarter or three months into the future and when he exceeds that deadline, he advances it 1/4
If Paul could get his new system out today, that meets his standards, he would. I expect he is having supplier issues. I would rather have Paul wait to get the system right, and meet his quality standards, than release it in a hurry with quality and reliability issues.
Whenever I pre order something like this I usually just forget about it and whenever I get the email I'm excited about it again. Id assume you all probably already have ways of measuring powder so why all the worries about when it will be released. It seems everyone has faith that it will be the bees knees so just be patient. I don't have anything more then a chargemaster right now so whenever I do see this it will be a huge upgrade.
I agree and I will wait for his full system. It is exactly what I want.
But I also think these delays have gone from the merely annoying to the ridiculous. It has been going on for quite some time and supply chain issues are only the latest cause of delay.
Cheers
Similar threads
