6.5 creedmoor bild , What barre???

[cecchino76]

Hey guys , I am building an upper in 6.5 creedmoor , but I'm stock in barrel choice ,
I really don't know in what direction go for best accuracy in this build ,any idea would be very helpful
Thanks

 

[Black max]

I have a 20" noveske and have been very very impressed. I'm not sure if you can find one though. Might look into having a smith make you one out of a bartlein or any of the other good blanks.

 

[rideHPD]

Probably JP if you're talking DPMS pattern and want it now.

 

[cecchino76]

Hey Black Max ;
I have a DPMS type and noveske does not make that patter,
and even if it did, good luck to me finding one

 

[cecchino76]

Probably JP if you're talking DPMS pattern and want it now.

Thats a goog idea , I thought about that a lot ,
I even call the guys at JP and talk to them for half hour
My only concern: are those barel very accurate?

 

[rideHPD]

I'll give you the summary of my research on here: yes. Many state that their full rifles are on par with GAP for accuracy, just about as good as having a smith turn a Bartlein or Krieger, if not as good. Put together properly with good parts you should get .5 MOA or under, definitely .75 or less. There's never an absolute guarantee you're going to get a 1 hole build with an AR but if you're doing it yourself a JP barrel is about as good as you're gonna get.

 

[cecchino76]

Man, that's great informations, I am really greatful for your help,
At this point I have only two choices :
1- get a JP barrel nice and ready to install ( they even come already headspaced with bolt )
2- get a blank and have a good gunsmith do the magic!
The JP option seams faster

 

[SoundFx]

Barrel, 22", .308 AR, 6.5 Creedmoor, Heavy Contour, 1x8, Stainless, Threaded, Krieger

 

[cecchino76]

Barrel, 22", .308 AR, 6.5 Creedmoor, Heavy Contour, 1x8, Stainless, Threaded, Krieger

Do you like this better then a JP ? Accuracy wise that is!

 

[sch2046]

Do you like this better then a JP ? Accuracy wise that is!

I have a Krieger and it is very accurate, mark Gordon at shrt action customs had a few a while back and he put my upper together.
I have a heavy buffer and a jp adj gas block, my rifle runs line a dream.

 

[cecchino76]

That's got to be a nice set up, I'm contemplating a lot : going JP or Krieger?

 

[sch2046]

People seem to like jp barrels, I see them at competitions a lot. I don't think you can go wrong with either.

 

[cecchino76]

You make a point right there; they are two well known manufactures,
The JP even comes with a nice enhanced bolt already head spaced and ready to drop in

 

[cfulback32]

I have the 22" Krieger that was linked to above from Fulton Armory. I have been very happy with it so far. With 5 shot groups, it is around .5 moa

 

[sobrbiker883]

Anyone know what blanks JP uses?

 

[caelumatra]

Anyone know what blanks JP uses?

http://www.snipershide.com/shooting/snipers-hide-bolt-action-rifles/1891-jp-barrels.html

Wilson at least in 2008.

 

[cecchino76]

Anyone know what blanks JP uses?

Hey Sobrbiker883;
I think Wilson but has nothing to do with the Wilson combat that we all know,
What are your choices for AR barrel in 6.5 CM?

 

[LawnMM]

Do you like this better then a JP ? Accuracy wise that is!

I have one of those Krieger barrels also, I pulled a shot my first time out with it... The other four measured 0.305

Its shooting tighter than my trued bolt gun

 

[Black max]

Spoke to a jp guy over the phone and he said they were Wilson's but they took extra steps after they got them, ie cryo treating. Jp barrels will never out shoot a kreiger or a bartlein. Period

 

[LawnMM]

Spoke to a jp guy over the phone and he said they were Wilson's but they took extra steps after they got them, ie cryo treating. Jp barrels will never out shoot a kreiger or a bartlein. Period

I believe some of them are button rifled as well, no? Krieger and Bartlein are cut rifled

 

[Black max]

They are all button rifled.

 

[cecchino76]

That's it!
I choose the 22" Krieger from Fulton armory,
Good think I made up my mind ,I think I got the last one they had in stock,
Cause after 5 minutes I ordered , I went back on the web site and it was gone!

 

[cecchino76]

I have a Krieger and it is very accurate, mark Gordon at shrt action customs had a few a while back and he put my upper together.
I have a heavy buffer and a jp adj gas block, my rifle runs line a dream.

Do you have the 22" from fulton armory?

 

[sch2046]

Do you have the 22" from fulton armory?

Mine is a 22 but straight from Kreiger.

 

[Randoman5]

DPMS makes some really good barrels. If you can get someone to cut you a Bartlein they seem to be the best there is. The JP rifles are awesome but don't seem to be quite as accurate as DPMS or Bartlein.

 

[kvwpwr]

Barrel, 22", .308 AR, 6.5 Creedmoor, Heavy Contour, 1x8, Stainless, Threaded, Krieger

I have this barrel. It is a hammer. I've shot 8" 5 shot group at 1000yds with it. 3 of those were 2.75". I'm sure it could do better. I am the limiting factor.

[/URL]

 

[cecchino76]

I have this barrel. It is a hammer. I've shot 8" 5 shot group at 1000yds with it. 3 of those were 2.75". I'm sure it could do better. I am the limiting factor.

[/URL]

That's some good shooting bud;
Are you shooting factory ammo?
If not can you post some loads?
I am glad I went this route with barrel choice

 

[kvwpwr]

That's some good shooting bud;
Are you shooting factory ammo?
If not can you post some loads?
I am glad I went this route with barrel choice

Thanks. That is the only group I shot at paper at that distance. I usually shoot steel. I normally can keep 3-4 out of 5 shots on 8" round plate.

The load that day was

140gr Berger hybrids
42.0 gr H4350
Hornady brass
Fed 210m primer
2.810"

The factory hornady ammo is excellent as well.

 

[LawnMM]

Bartlein and Krieger produce cut rifled barrels, they may also do button rifled but the Fulton barrel in 6.5cm is cut rifled

 

[kvwpwr]

Bartlein and Krieger produce cut rifled barrels, they may also do button rifled but the Fulton barrel in 6.5cm is cut rifled

All bartlein and kriegers are cut rifled. The criterion that Fulton sells is a button rifled barrel. Criterion is owned by krieger and produces button rifled barrels.

 

[InkedIan]

All bartlein and kriegers are cut rifled. The criterion that Fulton sells is a button rifled barrel. Criterion is owned by krieger and produces button rifled barrels.

The barrel he is speaking of is made from a krieger barrel not a criterion. It says so in the description and the price reflects.