Poor coyote. Now the deer and varmints are going to take over.
Can’t post in this thread without adding a pic lol
4yr old daughter shooing in 6.5. Already asking to get out again.
This is where I hope to be one day. Ax vudoo and a legit ax ??? the envy is real
Competing over at the New Zealand Mountain Challenge a couple of weeks ago with the AX308 in 6.5CM. Amazing scenery, excellent people!
Oh my, I installed a competition trigger in the AX, what a difference! I went from 3lbs to 1lb. I'm sure I'll be a better shot now... 
Got in a little social distancing this afternoon..
I’m looking to take the plunge into getting an AIAX.
For replacement barrels, should I be at all concerned about buying prefits for AI? Like the Win Tac, Proof, etc? Some people swear you should get smiths to perfectly match it to your action, but I don’t know enough to answer that.
Also, first world problems, but any thoughts on color? Trying to decide between Pale Brown and Dark Earth. I haven’t seen in person, just online. Pale Brown looks like a lighter tan, Dark Earth looks like a darker brown? With a black scope I don’t think it will matter, but what would match/coordinate better if I went with a Razor Gen II? My wife won’t like hearing I’m spending more time (and money) trying to coordinate the look of a rifle more that my actual wardrobe...
For replacement barrels, should I be at all concerned about buying prefits for AI? Like the Win Tac, Proof, etc? Some people swear you should get smiths to perfectly match it to your action, but I don’t know enough to answer that.
Also, first world problems, but any thoughts on color? Trying to decide between Pale Brown and Dark Earth. I haven’t seen in person, just online. Pale Brown looks like a lighter tan, Dark Earth looks like a darker brown? With a black scope I don’t think it will matter, but what would match/coordinate better if I went with a Razor Gen II? My wife won’t like hearing I’m spending more time (and money) trying to coordinate the look of a rifle more that my actual wardrobe...
Don't worry about prefit barrels as long as it's from a reputable source. If you're doing standard calibers like 6.5 creed, Mile High and EuroOptic have the real specs and the real Cerakote colors to get you a "factory" barrel. Any other shop can turn a good AI barrel, I use Long Rifles Inc, personally.
As for color, where are you located geographically and will you hunt with it? I've never liked Pale Brown, I don't really care for the color but it makes no sense to me in the grass/woodlands of WI where I live. If you live in the desert it would make more sense. Dark Earth and Sage Green will blend in with more environments IMO, but I can't imagine why anyone would choose anything other than Sage Green. It's scientifically proven to be the best
But sage green isnt ... "Elite." If it were, it would have in it's name like my elite sand does. (Said while looking down my nose.)Don't worry about prefit barrels as long as it's from a reputable source. If you're doing standard calibers like 6.5 creed, Mile High and EuroOptic have the real specs and the real Cerakote colors to get you a "factory" barrel. Any other shop can turn a good AI barrel, I use Long Rifles Inc, personally.
As for color, where are you located geographically and will you hunt with it? I've never liked Pale Brown, I don't really care for the color but it makes no sense to me in the grass/woodlands of WI where I live. If you live in the desert it would make more sense. Dark Earth and Sage Green will blend in with more environments IMO, but I can't imagine why anyone would choose anything other than Sage Green. It's scientifically proven to be the best
Thanks for the compliment! The straight trigger shoe is factory AI. It's made for the comp trigger, but works with the standard one as well. I had the 4302 left over from another setup, so I just used it on this rig so it would fit into the transit case. I had an ERA-TAC mount on it originally but that was too tall for the foam cutout.
Note also for transit case owners.... With a little trimming, you can fit a 338 Ultra under the stock area!
Last edited:
22mph wind, 1921m, 6.5CM, 1 metre steel gong...
... Not going so well
22mph wind, 1921m, 6.5CM, 1 metre steel gong...View attachment 7289158... Not going so well
I read the top portion then looked at the picture and thought man that’s impressive with the caliber and wind considered....then I read the “not going so well” portion and thought, “yep, that’s more of what should have come to mind” ?
Thanks for the advice, ya’ll! Obviously I want the most accurate color I do have a question. Trying to figure out the color in these two pictures. On the upper picture I would assume the top rifle is pale brown and bottom is dark earth? However, on the bottom picture Mile High said the color is dark earth.
On the top picture what I assume is dark earth looks dark brown, on the bottom more yellow/coyote. Is it the lighting? Am I off on the correct color on that upper picture? Did the colors change on newer models?
I do have a question. Trying to figure out the color in these two pictures. On the upper picture I would assume the top rifle is pale brown and bottom is dark earth? However, on the bottom picture Mile High said the color is dark earth.On the top picture what I assume is dark earth looks dark brown, on the bottom more yellow/coyote. Is it the lighting? Am I off on the correct color on that upper picture? Did the colors change on newer models?
Last edited:
The top is Pale Brown, the one below is Field Drab (dark earth). The difference is the lighting.
Thanks for the advice, ya’ll! Obviously I want the most accurate color
On the top picture what I assume is dark earth looks dark brown, on the bottom more yellow/coyote. Is it the lighting? Am I off on the correct color on that upper picture? Did the colors change on newer models? View attachment 7289703
Thanks for the advice, ya’ll! Obviously I want the most accurate color
On the top picture what I assume is dark earth looks dark brown, on the bottom more yellow/coyote. Is it the lighting? Am I off on the correct color on that upper picture? Did the colors change on newer models? View attachment 7289703
Pale Brown Master Race FTW.
Top pic is dark earth in good lighting
Bottom is pale brown
Wtf cares spray paint that shit whatever color your want.
Here's mine pale brown rattle canned banged up and used hard...
hard to find photos of AI's with anything other than ATACR's OR PMII's
here is a razor on a PB
While not an AI here is my razor on my custom switch lu700 in AIAX Chassis. It's cerakoted Coyote Tan. It's just a tad less "pink" than PB.
The razor would look weird on DE. It's a much deeper brown/red than PB
As far as deciphering colors. PB always has a tan butt pad and black rear pistol
Grip. DE has solid color pistol grip and Black butt pad.
Are you saying H-212 is a direct match for factory AI Dark Earth? Or that your rifle is cerakoted in H-212?
Got any pics?
I used noveske tiger eye brown and it's pretty dang close at ai dark earth fyi.
Just ordered a Pale Brown AIAX Demo from Eurooptic. Thanks for the all the advice! I’ve been checking this thread out for the past 2 years and have learned a lot of info from you guys.
The only thing that’s ever concerned me is I’ve heard some have to torque it past spec recommendations. Sounds like @samb300 might have discovered it was an issue with the epoxy. Is there a good way to check movement of the Quickloc without removing the action from the stock?
If anyone has any advice or tips for an AI newbie feel free to share.
The only thing that’s ever concerned me is I’ve heard some have to torque it past spec recommendations. Sounds like @samb300 might have discovered it was an issue with the epoxy. Is there a good way to check movement of the Quickloc without removing the action from the stock?
If anyone has any advice or tips for an AI newbie feel free to share.
Only way to do it is to remove the barrel and look inside the action from the front while you tighten and loosen the QuickLoc screw.
That might be because the serrated washer is no longer conical. They’re $.06/each. They’re conical to keep tension on the screw.
this stuff in field drab has been a dead on match to AI dark earth for me
Air Cure Aerosol Paints | Paint Finishes at Brownells
Brownells is your source for Air Cure Aerosol Paints,Paint Finishes at Brownells parts and accessories. Shop our vast selection and save!
www.brownells.com
