I don't see it in the pinned posts and tried the search option as well. Does anyone mind sharing some load data (50 BMG) on a variety of loads, from ball to precision projectiles.
Sharing Load data for 50 BMG
- Thread starter Weapon_50BMG
- Start date
Checking them out now, it appears that they have members only forum. Maybe they share some load data within there? I have (3) different loading manuals and they each have some limited info in them. I just hoping to get some others experiences with different loads. There seems to be a wealth of knowledge here on the Hide and was trying to avoid joining another website... that said I guess it doesn't hurt to add myself over there too.
When I was setting up to reload for the 50 I learned a lot from them. It was many years ago, but it takes more than load data. You may be further along than I was, but there are people there who have spent years just considering what press will work best, if you are going to do it you'll likely need a separate bench, unless you already have a large bench with an open area.
I set something up that lets me get it done, yet I don't feel knowledgeable enough to offer advice. I just remember where I got advice when I needed it.
I set something up that lets me get it done, yet I don't feel knowledgeable enough to offer advice. I just remember where I got advice when I needed it.
An FCSA membership is the best investment you can make if you're shooting 50 BMG.
Here’s what I loaded.
Barnard Big-Mac .50BMG: 750gr Hornady A-Max (1:15" twist 32")
Lapua brass, CCI #35 primers, 234gr H50BMG
CBTO (ogive) measurement: 4.403" (.010" jump) 2770fps temp: +25c
And the FCSA group is very helpful.
Barnard Big-Mac .50BMG: 750gr Hornady A-Max (1:15" twist 32")
Lapua brass, CCI #35 primers, 234gr H50BMG
CBTO (ogive) measurement: 4.403" (.010" jump) 2770fps temp: +25c
And the FCSA group is very helpful.
I have:
Press
Dies
US869 Powder
H50BMG Powder
Surplus W860 powder
CCI Primers
Once fired brass
Just looking into some projectiles now, There are a lot of options still for 50 cal. projectiles, so I just need to decide which ones I want to try.
Bought a couple hundred of theses a while back to use in My M82A1 to stay within mag length. I think there was one or two out of a hundred that exceeded a +/- .1 weight variance! Loaded them up and just did a test fire but have not done any serious accuracy testing yet.
www.lehighbullets.com
Might be worth a look.
Match/Target Bullet 510-120 .510 Solid Ball | Lehigh Bullets
The .510 Solid Ball brass match/target bullet is an excellent alternative to those requiring accuracy far exceeding standard 50 BMG military ball projectiles.
www.lehighbullets.com
Might be worth a look.
Spent some time looking into this and everything that came up for me was related to 50 cal Muzzleloaders. Don't think it has anything to do with BMG, oh well I learned something in the process.
Running the surplus projectiles through a Lee push through sizer will indeed get you better results. Be sure to cull the undersized ones and hour glass shaped ones.
Sizing and sorting the surplus ball stuff makes it quite a bit better every time I've seen. On good bullets like amax you're obviously wasting time haha.
Sizing and sorting the surplus ball stuff makes it quite a bit better every time I've seen. On good bullets like amax you're obviously wasting time haha.
Something else that pops up a lot when I shot mine a bunch... anneal your brass more frequently than you normally would. Lots of the pull down brass or mg fired stuff needs it badly before you even size it. Don't have to do it fancy or anything crazy, just need to relax the metal a little. Case head in fingers and turn neck in the flame will work just fine and keep you from splitting necks on your first firing.
If you find you can't seem to get it done evenly, the more in depth methods will help with consistency.
If you find you can't seem to get it done evenly, the more in depth methods will help with consistency.
