I don't have mine yet but I want to see the ones who do. Thanks -Austin
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportWouldn’t want to get into a Nerf battle against that one.Started mine with some Cerakote.. Wont be for everyone and something I wanted to try. I like it.
My son said the same thing lol..Wouldn’t want to get into a Nerf battle against that one.
Well…..it’s colorful.Started mine with some Cerakote.. Wont be for everyone and something I wanted to try. I like it.
Pretty much what mine will look like lolObviously,..I’m not a photographer, but I’ll go first.
PVA?Obviously,..I’m not a photographer, but I’ll go first.
Covered the first outing yesterday in post #3194 on the other thread.PVA?
Also, range report?!
Covered the first outing yesterday in post #3194 on the other thread.
Hopefully I can get serious with it this weekend, if the wind behaves....
So far, it's even better than I expected!![]()
Started mine with some Cerakote.. Wont be for everyone and something I wanted to try. I like it.
I have three builds that are complete.
I am not going to share anything about them here.
I am also a liar.
-Stan
I had an AG Composites stock that was supposed to be red and OD green but came in with the bright green instead, a bit much for my tastes so I sent it back and got it redone. This post also still counts as there is a 50/50 chance it’s getting put on a CDG.Started mine with some Cerakote.. Wont be for everyone and something I wanted to try. I like it.
I like it alsoStarted mine with some Cerakote.. Wont be for everyone and something I wanted to try. I like it.
I'd like to see the left side to see how you ran your Brandt Built set up.
I'd like to see the left side to see how you ran your Brandt Built set up.
Mine came with two straps.@S3th Thanks. What mount do you have there for the level? Edit, I see it above the picture. How did you get that extra strap? Mine only came with one.
I bought the Picatinny mount from ARC to go on the M-Brace. My idea is I can remove the complete scope setup to another rifle if needed.
Mine's going in a C4, but I think they're already setup for trigger hangers. I'll know for sure tomorrow.View attachment 8140425
Working on my build with a KRG Whiskey3, trying to accommodate the trigger hanger. The main interference is that screw that holds the trigger guard onto the chassis backbone. I need to take it down lower, but at a point the screw won’t be removable…
Anyone successfully fitted their CDG to a KRG chassis yet?
View attachment 8140425
Working on my build with a KRG Whiskey3, trying to accommodate the trigger hanger. The main interference is that screw that holds the trigger guard onto the chassis backbone. I need to take it down lower, but at a point the screw won’t be removable…
Anyone successfully fitted their CDG to a KRG chassis yet?
This is the way. Thanks for the tip!Replace that screw with a flat head countersunk screw like this. It will give you more room and you can countersink the screw deeper if needed. You can get the screw and countersink at Ace Hardware more than likely.
View attachment 8140498
I'm a wee bit more dense that even usual today....I see what looks sort of like a Send-it level but what's with the cable harness running to the ocular area of your scope?MDT’s new mlok 90degree mount
View attachment 8140481
I have no idea what that is either lolI'm a wee bit more dense that even usual today....I see what looks sort of like a Send-it level but what's with the cable harness running to the ocular area of your scope?
Thanks for taking pity on the mentally feeble (ah...that would be me! haha)
It IS the MDT (formerly LRA) Send-It level with a fiber optic cable product to move the lights to the ocular.I'm a wee bit more dense that even usual today....I see what looks sort of like a Send-it level but what's with the cable harness running to the ocular area of your scope?
Thanks for taking pity on the mentally feeble (ah...that would be me! haha)
hahaha...I have a Send-it level and where that cable comes out is where the LEDs are on mine and there is no feature at all that requires a cable. Wonder if its an older model and....?? Well, don't really know.I have no idea what that is either lol
That's actually a really good idea.It IS the MDT (formerly LRA) Send-It level with a fiber optic cable product to move the lights to the ocular.
![]()
Ocular Housing Anti Cant Indicator | Brandt Built
Brandt Built Ocular Housing Anti Cant indicator works with your exisitng Long Range Arms Send It line of levels. Our add on does not modify the original level simply remove the cover and install ours! Our add-on kit allows you to mount the acutal level in any of the suggested orientations but...www.brandtbuiltconcepts.com
haha...just found it myself. I search for Send-it accessories and didn't find it at first and only having three fibers threw me off as the Send-it has 5 LEDs. I see you get a new housing as well as the indicator that mounts under your ocular.It IS the MDT (formerly LRA) Send-It level with a fiber optic cable product to move the lights to the ocular.
![]()
Ocular Housing Anti Cant Indicator | Brandt Built
Brandt Built Ocular Housing Anti Cant indicator works with your exisitng Long Range Arms Send It line of levels. Our add on does not modify the original level simply remove the cover and install ours! Our add-on kit allows you to mount the acutal level in any of the suggested orientations but...www.brandtbuiltconcepts.com
I’ll text you old manhaha...just found it myself. I search for Send-it accessories and didn't find it at first and only having three fibers threw me off as the Send-it has 5 LEDs. I see you get a new housing as well as the indicator that mounts under your ocular.
Thanks...hope you are doing well. I'm still a good 6 weeks from being able to shoot again but when I do maybe we get together and go to IWL or Fairfax Rod and Gun (belong there too).
Cheers and thanks for the reply.
Ive got this same thing comming once i get the action. Are you going to us aw mags? If so, let me know what mag catch you end up needing if you could.View attachment 8140425
Working on my build with a KRG Whiskey3, trying to accommodate the trigger hanger. The main interference is that screw that holds the trigger guard onto the chassis backbone. I need to take it down lower, but at a point the screw won’t be removable…
Anyone successfully fitted their CDG to a KRG chassis yet?
How’s it shoot?
It’s in pieces. That was just a mock up. Action is with my buddy getting a 6GT barrel spun upHow’s it shoot?
So the bolt nose doesn't need a recess/coned breach?It’s in pieces. That was just a mock up. Action is with my buddy getting a 6GT barrel spun up
Didn’t for 308 win. But it’ll only feed smootherSo the bolt nose doesn't need a recess/coned breach?
Here this whole time I thought the cone was for the bolt nose to insert into, not just a feeding ramp for the bullet. Weird.Didn’t for 308 win. But it’ll only feed smoother
If that were the case, why would they say it’s not necessary for the larger bore cartridges, as they do? Just saying.Here this whole time I thought the cone was for the bolt nose to insert into, not just a feeding ramp for the bullet. Weird.
Because the chamber opening is larger? I don't have the pieces in hand to see the relationship. I didn't understand something, it happens.If that were the case, why would they say it’s not necessary for the larger bore cartridges, as they do? Just saying.
Tis flat like the earth (edit: or your mom)Here this whole time I thought the cone was for the bolt nose to insert into, not just a feeding ramp for the bullet. Weird.
I think this is the illustration that had me thinking...Looks like the extractor needs to sit in the cone part. But @Rex_Allen he says it's working with a flat breach.Tis flat like the earth (edit: or your mom)
View attachment 8142506
vsI think this is the illustration that had me thinking...Looks like the extractor needs to sit in the cone part. But @Rex_Allen he says it's working with a flat breach.
![]()
Damn you got skills.