-
Having trouble using the site?
Contact support
Accuracy International AT-XC
- Thread starter R.Walters
- Start date
The new AT-XC feature set in a little more detail includes the following:
• The action is 4OZ lighter than the old generation AT-X
• It is secured into the chassis system by 6 screws instead of 4 on the previous gen
• Gas vents on the action in the mishap of a over pressure event or bore obstruction
• The operating force of the bolt has been reduced
• Increased bolt lug area which increases strength and yield levels
• Improved surface finish for smoother operating of the bolt
• Bolt head has a retention system like the AXSR
In the states we will have the AT-XC as pictured above in I believe Red, Black, Sage Green and Dark earth. The only difference on the AT-X Mil is the foreend is short enough to accept a 16” barrel, comes with the B&T muzzle brake and the grip is different.
Sorry for the delay fellas!
• The action is 4OZ lighter than the old generation AT-X
• It is secured into the chassis system by 6 screws instead of 4 on the previous gen
• Gas vents on the action in the mishap of a over pressure event or bore obstruction
• The operating force of the bolt has been reduced
• Increased bolt lug area which increases strength and yield levels
• Improved surface finish for smoother operating of the bolt
• Bolt head has a retention system like the AXSR
In the states we will have the AT-XC as pictured above in I believe Red, Black, Sage Green and Dark earth. The only difference on the AT-X Mil is the foreend is short enough to accept a 16” barrel, comes with the B&T muzzle brake and the grip is different.
Sorry for the delay fellas!
Thanks for taking time to update. It's a busy week for everyone.
Quick question, the forend cover on the XC, is the rail key slotted onto the top or integral?
Defiantly ask about getting spare parts for the rifles (AT) onto market
Agreed. About $5k is my limit.
Gonna have to sell my AT for $10k, I know what I got .
I didn't ask if I get back there, will ask. You guys that have been to SHOT know it's a huge freaking zoo, maze, rock concert, goat rope,cat herding and stampede rolled into one place
. Stay safe man.
Yes but it mentioned the at as well and apparently it’s just le only.
Scott S was there this morning. Straight from him, eventual discontinuance of the sa to commercial sales, but he said they are looking hard at the AT as its so popular. Very interesting to speak with, very informative.
They only need one model of AT. Green with thumbhole stock. Similar to the old AW. There’s still a decent crowd that’s into the old school AI’s vs the new stuff
I think that's why he said the AT being reviewed
I sure appreciate you asking for me! That’s an interesting answer…euro had a few axsa listed at 6500$. Seems like a no brainer over the new atxc for the same price.
I can’t really tell a difference of bolt lift in my axsr vs my atx .
Mine feel similar but a little different. I never would have guessed the lift in the AXSR is lighter. The biggest side by side difference I can tell is on close the AXSR cams closed or pulls is noticably to the chamber.
It’s honestly way over blown. If you’re running the bolt hard you’ll never even notice it.
Shot at a yote last summer on the run with mine balanced on a truck door and never lost track of it in my scope. Hit him with my second shot at 400 on the run.
With that said in a bench setting slow firing its probably noticeable.
What he said. Is the AI bolt lift heavier than most? Yes.
But, if you're experiencing things like coming off target while cycling, or losing points at a match due to this......you're just not operating the rifle properly. Most of the time this happens when people just try to take a couple fingers way out on the ball of the handle and lift. That will torque the rifle over a lot of times. As long as you keep your hand close to the rifle and use a "knife hand" in and upward motion....the rifle won't move. And you can use your thumb on top of the chassis directly behind the bolt shroud to give you even more leverage and cycle faster. Takes a whole 5-10min to figure out the motion and get used to it.
It's perfectly fine to have a preference and just not like the AI bolt lift. But its not something that will affect your shooting unless you're very sloppy with your motions.
But, if you're experiencing things like coming off target while cycling, or losing points at a match due to this......you're just not operating the rifle properly. Most of the time this happens when people just try to take a couple fingers way out on the ball of the handle and lift. That will torque the rifle over a lot of times. As long as you keep your hand close to the rifle and use a "knife hand" in and upward motion....the rifle won't move. And you can use your thumb on top of the chassis directly behind the bolt shroud to give you even more leverage and cycle faster. Takes a whole 5-10min to figure out the motion and get used to it.
It's perfectly fine to have a preference and just not like the AI bolt lift. But its not something that will affect your shooting unless you're very sloppy with your motions.
Using the “knife hand” (fellow KARATE MASTER lol) I find I have even more leverage if I place the thumb on on top of the bolt shroud when unlocking the bolt. Just an additional tip for @i_s
Last edited:
I'll have to try that. I put my thumb just behind the shroud on the flat area.
Dude they're all fundamentally the same. Who cares?
ETA: call mile high and ask if it means that much to you.
I knew the AI bolt lift was heavy, but man I was pretty shocked when I handled a friends AI after ~2 years of not touching one.
I get it, a good rifleman should be able to work anything. AI's are great rifles. There are ways as a shooter to overcome that heavy bolt lift, procedurally in how you run the bolt and grip the rifle.
But after getting used to really light bolt lifts on actions with timed triggers (like my Mausingfield + BnA combo), the AI bolt lift and throw is hard and clunky. You can certainly overcome it, it's just not a pleasant experience. The experiences are night and day different between an AI and some custom actions.
That's my hot take for the day. I think AI would be well served to make the bolt throw lighter and more refined feeling. It would only make a great rifle even better, IMO.
I prefer the adjectives 'solid and confidence inspiring'
, and actually find the bolt throw quite pleasant, this is on a well worn in axsr.And yes, I've owned about every rem 700 clone out there. Many of those are nice as well, just different.
For a low price of $6-12k, you can get a six pack on your thumbs and fingers.
The bolt manipulation technique with the thumb pivoting off the stick/chassis has been a thing for like a decade. Idk why it keeps getting mentioned as if it’s new. If someone is new and shooting an AI, then they really shouldn’t have an opinion.
Fact if the matter is, my ATX bolt is garbage compared to my AXSR, MRAD, and Zeus (and my old shadow40 and Mausingfield that I no longer own). It’s not even close to the 90 degree throw actions I had (for obvious mechanical design reasons).
Instead of people saying “it’s not that bad,” maybe demand from AI a better product. You should demand from everyone you spend your money at a better product. LR is getting ripped to shreds because of their poor product and for good reason. Ironically, it’s not a $6k+ item either.
Last edited:
I prefer the adjectives 'solid and confidence inspiring'
And yes, I've owned about every rem 700 clone out there. Many of those are nice as well, just different.
I agree that subjectivity plays a role in this. Depends on what you are looking for and like I guess.
I've tried to stay out of this thread as I am currently unhappy with AI as a company, but we should really demand better support from them. That is what is killing my experience. I don't give 2 craps about the bolt lift (sample size of 1 and in the heat of competition or even slow-f-class, I've never had an issue), but what kills me in the unavailability of parts and upgrades.
ANY other custom action I can get a 223 Bolt, Mag Bolt, 308 Bolt
I can get triggers in the 100-200 dollar range
I can Attach a Sling (FOR FREE!)
AI really needs to step up--I cannot beleive you can't put a sling on a $6000 rifle without spending more money (or in my case $5000).
Frankly thats asinine.
Bridges/hinges/rails all are near unobtanium to the average joe. We can't get parts so no matter how good the rifle is, we can't customize it or get the accessories we need. That's the real downside of AI. I have a day-job I can't be scouring the internet to get a hinge 24/7 or trying to find a sling attachment for $100.
I can walk into any Cabelas and get an mlock rail, or QD point for $20--everybody talks about keyslot--yeah its great except when there is No inventory. The greatest invention in the world is worthless if you can't deliver product.
We need bolts, accessories, and we needed them yesterday.
I know just get an AXSR where I MIGHT get a change at a different bolt.
Or you know, I could get an Impact, TL3, CdG, Defiance, Terminus and all the bolts (or Bolt Heads!) I need for less, slap em in an chassis and have cash left over. Several of those companies I can talk to the owner direct and have them hook me up or call a smith (shout-out to Bugholes) who can quote and build and help me out like a real customer. I may get stuck with mlock or kmod, but I'll have the gear i need to go shoot. And that's what I care about.
It really begs the question, what does the AT-XC offer that other custom bolt mfg offer, for less.
Ball is in your court AI.
The issue is that a lot of people like the way the AI bolt feels. Sounds like you might have an outlier if you ATX feels that much worse than others. I've personally never handled an AI where it was even remotely close that I would call it garbage or anything like that. I personally like the way the bolt feels and manipulates.
"Demanding better" would imply that its not a pretty subjective matter, which it mostly is.
I agree 100% there's things AI doesn't do well and should be demanded better. But bolt lift/feel isn't one of them.
Consider me an outlier as well. I was considerably underwhelmed with the last AI I handled.
That seems to be the MO of most European based companies. They aren't as consumer driven as American companies.
No. It is that they want a spare bolt so it can be modified for 223 or magnum bolt face. There aren't really any ai bolts available.
In case you missed it. Don't remember enough of the original thread to find it quick.
Accuracy International 223 conversion working
Anyone who has said that AI is not the end-all be-all for all applications is correct. They are a purpose built rifle that's designed to function in all conditions. From a competition point of view, they are indeed "less than perfect" as the heavy bolt lift and high center of gravity make them...
www.snipershide.com
12lbsboltliftgang homie
Doesn’t bother me. I just like the ongoing joke around the bolt lift. But here are the facts between mine
My 15 AT takes about 8-9 lbs to lift the bolt when you drop the firing pin
My 22 ATX takes 12 lbs to do the same
Trigger scale used to measure the lift. If that’s acceptable to you is up to you. Personally I don’t care but I’m not shooting prs or fclass with mine either
no, i'm not asking about spare bolts.No. It is that they want a spare bolt so it can be modified for 223 or magnum bolt face. There aren't really any ai bolts available.
In case you missed it. Don't remember enough of the original thread to find it quick.
Accuracy International 223 conversion working
Anyone who has said that AI is not the end-all be-all for all applications is correct. They are a purpose built rifle that's designed to function in all conditions. From a competition point of view, they are indeed "less than perfect" as the heavy bolt lift and high center of gravity make them...
I'm asking IF the bolt lift complaints on the AT-X are coming from people who have run AW/AT/AX actions over the years...
and THEN complaining there is lower performance on newer vs older dates of manufacture?
[EDIT--Like this]
Cheers.
Quality as a metric is massively subjective and the customer segments define what quality means. So, there can be segments of customers that have different definitions. Look at ASQ and ISO for the numerous definitions of quality.
Edit: and you’re right. Garbage is a harsh word. I’m exaggerating a little here.
Similar threads
Firearms
AT-XC
