Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportThose choices have always been in the system and we have done very few with smaller channels. Keep in mind the M24, M40, and Proof Sendero are all the same cut@RobertB
Did y'all start doing different specific barrel inlets for LRHs?
IIRC, they were all a pretty wide/universal channel when the LRH first came out. I now see proof sendero, M24, etc under the ready to ship on your website
What stock pack is that on the eh2? Been looking for a shorter one that doesn’t cover up the rear flush cups.Just realized I never posted a picture of my Tommy bahama LRH build finished. 7 Sherman short, Archimedes, krieger #5 at 25.5” and a triggertech. Mark5 3.6-18 illuminated pr1 is going on it. Also put a picture of my light division nrl rig sitting in a eh2 manners that I shot this past weekend at the Oklahoma nrl hunter. Big thanks to @RobertB for all his hard work putting that match together, it was awesome especially under the harsh conditions of 108 degree temps. First time I’ve shot the light class and it was super cool to rock the sub 12 pounder. It’s a FN spr action with a 18” krieger, factory trigger and a cdi bottom metal, ran like a champ! View attachment 8196077View attachment 8196081
It’s the triad pad. I pulled the stitching out and cut it shorter then used the same piping I removed and sowed it back on. Looks original just shorter.What stock pack is that on the eh2? Been looking for a shorter one that doesn’t cover up the rear flush cups.
How long was your order leadtime?View attachment 8380009
Just received this LRH GAP. I ordered this without knowing there was paint amount options.
How long is that barrel? 24?"can't wait to use this for NRL Hunter open light" - me, a genius
View attachment 8386857
Spread those legs
View attachment 8386858
Ooh yeah, now do one from the side
View attachment 8386859
23.4oz bipods are so fuckinsexyflexy
Just to let everyone know, Manners no longer grants requests for heavier paint coverage when ordering a custom stock. Was very disappointed to hear that they will only put between 40 and 50% coverage on their stocks from here on out. I was told this even after offering to pay more for heavier coverage. I personally am NOT a fan of the more carbon fiber and less paint look. Ended up grabbing one from Altus in their Badlands camo because they still put a good amount of paint on those.View attachment 8380009
Just received this LRH GAP. I ordered this without knowing there was paint amount options.
I completely agree! I placed 2 custom order stocks about 6 months ago, and when they were ready to ship I asked for a picture of each and I honestly could not tell what camo pattern they were. Replied and said that I was not interested in purchasing them if they would not fulfill my request for more paint coverage. Pretty disappointed with them and their unwillingness to paint a stock that costs $1200..If they are no longer making custom stocks to how the customer wants them then there is no longer any reason to support them or for them to be in business. Definitely not at the prices they're charging, not anymore in today's market.
6.5 prc? What it be? Looks nice.
Send it back to manners and they'll set it up. They have a really nice full length; I got one with mine and it fits like a glove.Need to figure out a full length Arca rail
Is the Manners one still using the Area419 arcalock system instead of the RRS R-lock?I should add that I have the manners rail on mine and it’s great. I mentioned the sawtooth rail cause we put one on my friends rifle and it was very nice. Kinda like it better but just my opinion.
I’m trying to avoid having to drill more holes, mine came with the two sling studs up front
If you’re referring to the notches down the side as the arcalok. My manners rail is smooth so not on mine. As far as I know area419 does not make one specific to the lrh.Is the Manners one still using the Area419 arcalock system instead of the RRS R-lock?
This is what manners sends/fits for.
Ah man I was hoping it'd have R-Lock holes. I have to say I really like the R-Lock system. Sawtooth's rail has them though so no big deal. Foundation's rails have them for their stocks, hope Manners eventually follows suit.If you’re referring to the notches down the side as the arcalok. My manners rail is smooth so not on mine. As far as I know area419 does not make one specific to the lrh.
Sawtooth makes the rails for foundation, that’s the option to go with in my opinion. Drilling a hole in the lrh isn’t hard at all.Ah man I was hoping it'd have R-Lock holes. I have to say I really like the R-Lock system. Sawtooth's rail has them though so no big deal. Foundation's rails have them for their stocks, hope Manners eventually follows suit.
Well if sawtooth has what you like then great. Like I said above the sawtooth rail is LRH specific so it fits perfectly. I was extremely impressed with there product once on my friends lrh.Ah man I was hoping it'd have R-Lock holes. I have to say I really like the R-Lock system. Sawtooth's rail has them though so no big deal. Foundation's rails have them for their stocks, hope Manners eventually follows suit.
I’m looking to order a LRH shortly. Could someone please take a couple measurements on their stock for me?
I’m looking for a measurement from butt pad to the front of grip, and butt pad to trigger. If you have something other than the standard 1/2” pad, please let me know.
As I have smaller hands, I’m just trying to plan out what butt pad to order and how much I can get them to set the action back in the inlet.
Thanks
Is that with the standard 1/2” recoil pad?I took the measurements of my PH. I have both the PH and LRH here but the action is currently in the PH so for the trigger and trigger guard measurements I used that one. They are exactly the same size when I lay them on top of each other except for the foreend. It’s 1.5 inches longer on the LRH. I have short stubby (fat) hands and it seems to fit well. Haven’t shot either yet as I am recovering from surgery and needed to take a 6 month break from shooting. Will be selling the LRH and TBAC bipod (both still new and unused except for putting them together) here shortly. I switched from LRH to PH to mount my TRG bipod (with some minor mods). There is something about that TRG bipod I havent experienced with any other bipod yet. The barrel sits a lot lower resulting in a more stable rifle, straighter recoil. When folded up, she is completely out of the way allowing for a flat bottom for shooting of a bag or barricade or even attaching a 419 GripChanger/RailChanger bag. Anyways, I digress. Hope this helps. I attached some more pictures. Feel free to ask more questions if you have them. Plenty of time here.
Yes, standardIs that with the standard 1/2” recoil pad?
I'll have to measure mine. I think i have 3 spacers or 4 in. How many are you wanting to add?Question for any of you guys that added extra cheek spacers, what length of screws are you buying to fit the new height?