-
Having trouble using the site?
Contact support
Manners LRH Discussion
- Thread starter smacha538
- Start date
Those choices have always been in the system and we have done very few with smaller channels. Keep in mind the M24, M40, and Proof Sendero are all the same cut
What stock pack is that on the eh2? Been looking for a shorter one that doesn’t cover up the rear flush cups.
It’s the triad pad. I pulled the stitching out and cut it shorter then used the same piping I removed and sowed it back on. Looks original just shorter.
After trying the TCS and MDT ESS, I finally settled on the LRH. Great stock!
"can't wait to use this for NRL Hunter open light" - me, a genius
Spread those legs
Ooh yeah, now do one from the side
Spread those legs
Ooh yeah, now do one from the side
Last edited:
You still have to shed a half a pound or more. My friend a couple weeks ago had to take out his battery from scope and flip caps. That’s how strict they were with .1 I dont see where your dropping a half pound unless you change from your flexy bipod.
Just to let everyone know, Manners no longer grants requests for heavier paint coverage when ordering a custom stock. Was very disappointed to hear that they will only put between 40 and 50% coverage on their stocks from here on out. I was told this even after offering to pay more for heavier coverage. I personally am NOT a fan of the more carbon fiber and less paint look. Ended up grabbing one from Altus in their Badlands camo because they still put a good amount of paint on those.
If they are no longer making custom stocks to how the customer wants them then there is no longer any reason to support them or for them to be in business. Definitely not at the prices they're charging, not anymore in today's market.
I completely agree! I placed 2 custom order stocks about 6 months ago, and when they were ready to ship I asked for a picture of each and I honestly could not tell what camo pattern they were. Replied and said that I was not interested in purchasing them if they would not fulfill my request for more paint coverage. Pretty disappointed with them and their unwillingness to paint a stock that costs $1200..
I ordered a night stalker the day after they started taking orders at the end of January, requested more coverage as I also don’t care for the barely there paint they do anymore and the woman said they don’t do that anymore. I guess when you have the order volume they do you don’t have to give customers what they actually want.
Was going to pull the trigger on a LRH when the micro chassis became available. But not being able to have a choice on paint amount now is both disappointing and confusing since I got a different answer about three weeks ago from Manners. The email response I got was they are only offering a standard coverage which will be about 50-60% and a heavy coverage that will be around 80%.
Last edited:
American Rifle Company, Coup de Grace Action, 473 Bolthead, pivoting handle
Trigger Tech Special REM 700 2 stage (8-24/8-32)
Proof Carbon Sendero, 24 inch, 6.5 Creedmoor 1:8 (work done by LRI)
Manners LRH, SA, RH, Plains
Pure Precision M5 BDM
Manners Arca Rail 12 inch
APA Little Bastard muzzle brake, Gen 2
Aw 10 rnd magazine
Vortex Gen III, 6x36-56, Mil/Mil
ARC M-BRACE Rings, 34 mm/28mm
Thunderbeast bipod
Area 419 Arca clamp
12.5 LBS
Trigger Tech Special REM 700 2 stage (8-24/8-32)
Proof Carbon Sendero, 24 inch, 6.5 Creedmoor 1:8 (work done by LRI)
Manners LRH, SA, RH, Plains
Pure Precision M5 BDM
Manners Arca Rail 12 inch
APA Little Bastard muzzle brake, Gen 2
Aw 10 rnd magazine
Vortex Gen III, 6x36-56, Mil/Mil
ARC M-BRACE Rings, 34 mm/28mm
Thunderbeast bipod
Area 419 Arca clamp
12.5 LBS
Attachments
Last edited:
6.5 prc
Defiance Anti-X
C6 1:7 twist 1.100" barrel (threaded and currently wears a sythe ti.
TT diamond
Leupold mk 5 3.6-18 illuminated tremor 3
Clear coat on the stock looks amazing especially in the sunlight
Im doing another one right now with an 18" pro hunter stock in a Zermatt Ti3, it should be pretty killer when its done.
you can't beat the comfort of manners for hunting stocks.
Send it back to manners and they'll set it up. They have a really nice full length; I got one with mine and it fits like a glove.
Is the Manners one still using the Area419 arcalock system instead of the RRS R-lock?
If you’re referring to the notches down the side as the arcalok. My manners rail is smooth so not on mine. As far as I know area419 does not make one specific to the lrh.
Ah man I was hoping it'd have R-Lock holes. I have to say I really like the R-Lock system. Sawtooth's rail has them though so no big deal. Foundation's rails have them for their stocks, hope Manners eventually follows suit.
The Foundation rails i’ve seen do not have the R-Lock holes, they’re smooth, including mine
@360precision alsp makes 9” and 13” lightweight rails w/ the R-Lock
@360precision alsp makes 9” and 13” lightweight rails w/ the R-Lock
Sawtooth makes the rails for foundation, that’s the option to go with in my opinion. Drilling a hole in the lrh isn’t hard at all.
Well if sawtooth has what you like then great. Like I said above the sawtooth rail is LRH specific so it fits perfectly. I was extremely impressed with there product once on my friends lrh.
I’m looking to order a LRH shortly. Could someone please take a couple measurements on their stock for me?
I’m looking for a measurement from butt pad to the front of grip, and butt pad to trigger. If you have something other than the standard 1/2” pad, please let me know.
As I have smaller hands, I’m just trying to plan out what butt pad to order and how much I can get them to set the action back in the inlet.
Thanks
I’m looking for a measurement from butt pad to the front of grip, and butt pad to trigger. If you have something other than the standard 1/2” pad, please let me know.
As I have smaller hands, I’m just trying to plan out what butt pad to order and how much I can get them to set the action back in the inlet.
Thanks
I took the measurements of my PH. I have both the PH and LRH here but the action is currently in the PH so for the trigger and trigger guard measurements I used that one. They are exactly the same size when I lay them on top of each other except for the foreend. It’s 1.5 inches longer on the LRH.
Attachments
Last edited:
Yes, standard
And for clarification, the first picture (6228) with the measure tape is for the trigger, 2nd (6227) for the trigger guard, 3rd (6226) for the grip. I made sure to center the actual lens of the camera over the item i measured to eliminate as much as possible reading error due to angle.
Trigger is a TriggerTech 2 stage Flat trigger. A curved trigger might decrease the distance by 1/4 inch I believe from what I read here? In hindsight I probably should have opted for that but it does not seem to be a problem as of now.
Have you talked to Manners? Just out of curiosity; How far can they set the action back?
Last edited:
Question for any of you guys that added extra cheek spacers, what length of screws are you buying to fit the new height?
