Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportDo you have any photos of groupings at various ranges?Finally picked up the CPS. I'm bloody impressed by the quality of the rifle.
View attachment 7823058
Sorry mate, I don’t. Furthest I’ve shot with it is out to 840m doing some positional training using crappy 147gr factory ammo. Velocity with that ammo was about 2540fps I think. I’d need to check my bookDo you have any photos of groupings at various ranges?
What length barrel on this rifle? Trying to get an idea of what my .308 will look like. Thanks
16" Barrel? Curious how short of a barrel one can run while still clearing the end of the handguard.
Tell us more about that M200 with the MOUT/Izlid…View attachment 8350719
Can just got out of jail for the 375...
This is an 18" barrel with a competition hand guard, so it depends if you're going to thread for a suppressor or not...or which hand guard you actually have.16" Barrel? Curious how short of a barrel one can run while still clearing the end of the handguard.
Probably 14” for this one16" Barrel? Curious how short of a barrel one can run while still clearing the end of the handguard.
I've ran a sling on mine for 6-8 years and never had an issue. I have the Cadex QD side mount on the front left. Not sure how you're slinging yours if you're using a rail.Does anyone sling their Lite Comp rifles here ? Curious if anyone has had any issues with loosening of the rail to the reciever over time . Planning on doing a lot more field excursions where the sling would be beneficial.![]()
What kind of rifle is under it and what type of top mounted bipod is that?View attachment 8350719
Can just got out of jail for the 375...
Not an R7 owner. But I own a Kraken and I inquired to Cadex about running SRP. Basically their wording was as long as your not attempting to run it at warp speeds, you can use SRP. So if you have a load at the ragid edge of preasure, I'd back it off to the next node.Are you guys shooting any small primers in your R7 actions? Any issues?
Thanks mate. Will be for a 22" 7SAW barrel. I'll only be running the 150s so should still get solid performance from a slightly lower charge.Not an R7 owner. But I own a Kraken and I inquired to Cadex about running SRP. Basically their wording was as long as your not attempting to run it at warp speeds, you can use SRP. So if you have a load at the ragid edge of preasure, I'd back it off to the next node.
email Jamie at [email protected] and I will get you the manual cheersPicked up a used SA Dual Strike in the Px. Can someone kindly share the manual for it? Seems to not exist on Cadex's website and the chassis isn't the most intuitive + I'd like to get official torque specs for the screws. Also, do any cerakoters have experience disassembling these chassis for full paint jobs? Thanks.
![]()
How well does the chassis balance? Any issues putting it on a bag with the shape of the mag/foreend area? Looking at the same chassis for my build.Just finished my Cadex Light Comp-Solus Build and everything worked better than I expected. I like the way the chassis comes packed, and the alien tool set they supply as well, top notch Cadex!
View attachment 8434512
I'm happy!
I will post more pictures and build information in the Solus thread.
Are you running the Cadex arca plate or aftermarket?
just an aftermarket one mate. I think it’s a magpul. Easy to mod to get it fittedAre you running the Cadex arca plate or aftermarket?
My buddy has my Armageddon bag, so I had to use my Cadwell bench bag, and it balances pretty well. The mag is away from the bag by a quarter to half inch in the pic.How well does the chassis balance? Any issues putting it on a bag with the shape of the mag/foreend area? Looking at the same chassis for my build.