Grandson installed netflix app on streaming TV

Gunfighter14e2

Hunter/trapper of Remora's
Full Member
Minuteman
Jul 9, 2002
9,940
15,109
Lick skillet Alabama
eham.net
went to watch an instructional video on the TV and found everything ways slow across the board. Sound, F/forward, reverse, ect. Went to roku same thing, checked WiFi speed all ok. Started going thur and found that fucking faggot shit installed, removed it and everything went back to normal. Going to dig out the spectrum analyzer and reload that shit and see what happens. Suspect its capturing anything & everything then reporting home!
 
Obviously, you watch tv. I haven’t turned on a tv in years.
I don't watch tv, I use the tv for DVD's CD's & VHS tapes, its only wifi connected when the kids are here. The laptop is the only device wifi connected and that's with a cable to the wifi box. No smart phones, tattle tail appliances, none of the shit here. Rides are all old enough, no uplink anything.
 
Screenshot 2024-07-19 at 10.04.05.png
 
We have Netflix installed on a Smart (Prime) TV.
Sometimes we will switch without stopping Netflix (running in background).
Check that you have to go through the Click here, Click there to start up Netflix.

Most of our TV watching is OTA.
 
I don't watch tv, I use the tv for DVD's CD's & VHS tapes, its only wifi connected when the kids are here. The laptop is the only device wifi connected and that's with a cable to the wifi box. No smart phones, tattle tail appliances, none of the shit here. Rides are all old enough, no uplink anything.


Dude, you don't even know what Ethernet is called? I have very low hopes for your security and it is likely best if you don't have "Wi-Fi" turned on if you don't even know it's wireless... :ROFLMAO:
 
  • Like
Reactions: tyman
Dude, you don't even know what Ethernet is called? I have very low hopes for your security and it is likely best if you don't have "Wi-Fi" turned on if you don't even know it's wireless... :ROFLMAO:
Laughing, I don't think you understand what you think you know.
Its not as much about keeping people out, as it is keeping the mind fucking out you get, while so called "relaxing". I'm not in to faggotery, & being told I need to own XXX as coolness and look what I have, don't mean shit to me,... but I do realize that is the life of many, that are but one trick pony's.
 
Last edited:
I need to build that. I'm putting a new building up and I'm going to dedicate a spot for it. I remember you talking about it, awhile ago
The gasifier will power any resip I have from 6.5hp up to the 275hp (on gasoline) S/B Chevy in the F350. I also added a spare suction port to draw from, so I can pressurize some gas as well while its running. The hearths are interchangeable but I have found by throttling the air jets it does a great job on the 2.3 Ford (25kw house gen), up to the 350 flat bed. Even with the 25% lose of HP (on W/G) the house gen will still pull everything and the flat bed is geared so low, its a none issue there as well.

CIMG0187.JPGCIMG0188.JPGCIMG0192.JPG

This home made contraption is what I use to start getting it fuel down to size. Way easier & much faster than an axe and no fuel required, will except a little muscle. Its built to be operated by most anyone, as I built it very adjustable for the operator, some of the hood kids think its fun.

CIMG0189.JPGCIMG0190.JPG
 
It's also way easier to distill a little ethanol to pour in the tank than make diesel if we're being crazy.
Diesel can be mixed with mineral oil 50/50 to extend fuel reserves. All transformers on pole's have at least 3 1/2 gallon of mineral oil. Pump & line Diesel engines can be fueled via 85% woodgas 15% diesel, if the pump is calibrated correctly. W/O the small amount of diesel lube you will smoke the rings & cyl walls, unless you lower the compression <14/1
A diesel will also run on a mix of gasoline & ATF or lube oil, if you know what your doing. Pump & line engines are the easiest to mod, open loop computer controlled can be done easy as well. Feed back systems like modern shit is possible, but you better know how to mod the system for that.
 
Diesel can be mixed with mineral oil 50/50 to extend fuel reserves. All transformers on pole's have at least 3 1/2 gallon of mineral oil. Pump & line Diesel engines can be fueled via 85% woodgas 15% diesel, if the pump is calibrated correctly. W/O the small amount of diesel lube you will smoke the rings & cyl walls, unless you lower the compression <14/1
A diesel will also run on a mix of gasoline & ATF or lube oil, if you know what your doing. Pump & line engines are the easiest to mod, open loop computer controlled can be done easy as well. Feed back systems like modern shit is possible, but you better know how to mod the system for that.


I know guys used to run their old 12 valve Dodges on sample crude pulled from the tank. They'd have to drain a 5 gallon bucket from every tanker load, to use about 100ml to test quality.

But where do you think you're getting anything that isn't above ground and gravity fed if you needed it?

Not to mention you'll need to hit up the parts stores and steal every last fuel filter you can find.


I just hope to be at ground zero so I don't have to deal with it.
 
  • Like
Reactions: akmike47
I know guys used to run their old 12 valve Dodges on sample crude pulled from the tank. They'd have to drain a 5 gallon bucket from every tanker load, to use about 100ml to test quality.

But where do you think you're getting anything that isn't above ground and gravity fed if you needed it?

Not to mention you'll need to hit up the parts stores and steal every last fuel filter you can find.


I just hope to be at ground zero so I don't have to deal with it.
 
I know guys used to run their old 12 valve Dodges on sample crude pulled from the tank. They'd have to drain a 5 gallon bucket from every tanker load, to use about 100ml to test quality.

But where do you think you're getting anything that isn't above ground and gravity fed if you needed it?

Not to mention you'll need to hit up the parts stores and steal every last fuel filter you can find.


I just hope to be at ground zero so I don't have to deal with it.
You need to think out of the box more. Plus simply giving up, in the face of adversity is not a quality most are looking for, or inclined to help.
 
A deisel engine will run on lots of things. I have worked on a couple that ran on cooking oil or grease from restaurants grease traps. Stuff that's way easier to make than ethanol.