Any issues feeding? I know some posters had issues with the action overhanging the front of the magazine, wonder if its a real issue for someone using factory ammo?
-
Having trouble using the site?
Post any issues in the thread below or reach out directly to support!
Contact support
ARC Coup de Grace Builds
- Thread starter Awag1000
- Start date
Any issues feeding? I know some posters had issues with the action overhanging the front of the magazine, wonder if its a real issue for someone using factory ammo?
If I recall correctly the Hornady factory 225gr ELDM cartridges fed normally. When I hand loaded to magazine length the tip of the bullet hit the bottom of the action and wouldn't feed properly. It's pretty much a moot point for me now since I'm now loading Hornady 230gr A-Tips way longer than magazine length and they wouldn't magazine feed regardless.
Last edited:
Cut a notch with a mill, just had to do it on a Stiller to run a longer COAL in mags with no binder plate.
Not a big deal at all if needed but my understanding was the long action was cut to run CIP length mags.
Interesting stock. Looks to be made by McMillan via a benchmark mold. I knew they had a few of their own designs, but this is the first of this variety I've seen in the wild.
My first bolt action builds, gun on the bench is a LA 7prc and the gun in the field is a SA 6 creed on groundhog duty. 20” preferred barrels on both, still working on load development with the 7prc but the 6 creed is putting factory eldm in to tiny groups so far.
Attachments
I have a CDG action with a PVA 7 {RC due in about 10 days. Photos shalll be forthcoming.
Just finished mine and sent the first rounds last weekend. Still working on loads because it’s hard to find data for my caliber of choice 338 Norma Mag, but thanks to others before me on forums I found a good place to start and work up from.
26” Preferred Barrel, Grayboe Phoenix 2, Hawkins M5, MDT mags and COMP Brake.
26” Preferred Barrel, Grayboe Phoenix 2, Hawkins M5, MDT mags and COMP Brake.
Attachments
11.0 pounds as pictured in 300 WSM
Recoil is uh, “stout”.
Recoil is uh, “stout”.
Probably not a deal breaker, but do AT-X mags work in the CDG builds? I know they are slightly different than the AW mags. My smith just said the CDG was "weird" so it mad me nervous
It is to “smiths” that have never done a coned breach before. @DocRDS would be better off going with someone like Southern Precision (Bugholes) who already know what they are doing.
It's not "weird", it's got some features he's probably not seen before. The pivoting bolt handle for one, but that's about it. Yeah, not a lot of coned breech receivers out there, but the CDG isn't the only one.
I run atx mags in my CDG 65cm no issues? Certain chassis won't take them. I am using an atx chassis tho, so maybe thats the reason it all works together.
Well, here's my 2nd CDG build, I'm truly all in on these! They have became my favorite action by far over all my others including Stiller, Defiance, and Surgeon.
I also decided to jump into the 25creedmoor pool so here's my new stick.
ARC CDG
Brux 4gr at 28", 1.25" strait barrel
Triggertech Diamond
MPA Matrix Pro
Vortex Razor G3 6x36
ARC Mbrace
I also decided to jump into the 25creedmoor pool so here's my new stick.
ARC CDG
Brux 4gr at 28", 1.25" strait barrel
Triggertech Diamond
MPA Matrix Pro
Vortex Razor G3 6x36
ARC Mbrace
Found a second archimedes and it was basically brand new! They run so much smoother than the CDGs I have. Lifter bolt lift too.
Yeah but some people don’t like that the Archimedes bolt flops around like a cock in a sock. Not that it bothers me.
Depends on the cock and the sock though doesn’t it?
My personal pair of cdg(first day pre-orders) are one trick pony, only run AW mags, the mag well cut doesn't allow an aics up to feed no matter what chassis it's in. The 6gt took a ton of tuning of feed lips and spacer fn around to get it to feed 100%. My archimedes have just ran, 100% br variants, gt, creed, any aics mags without spacers. It's just been bomb proof.
Single feed is almost always more forgiving. My Archimedes feeds everything from the mag flawlessly. However, it struggles with 223Rem fed from on top of the mag lips. 6.5CM and 6.5PRC feed flawlessly from on top of the mag lips.
Curious. You talk to ARC? I have a couple day 1 preorders myself, one was feeding 6mm ARC via MDT mags and .223 Rem via Accurate Mag.
My preference is also for the Archimedes when it comes to calibers that only have single stack mags available. I have 4 Archimedes up and running-- 2x in 223AI, 1 in 20 Vartarg, and 1x in 7 PRC. They're awesome, super smooth actions and the Archimedes with the default 22# striker spring has a smoother and lighter bolt lift than the CDG with a 19# striker spring. I was sad to see them discontinued and had to scrounge the PX to find one for my 20 Vartarg build (I knew there was no chance of getting the small and stubby 20VT to feed in a CDG after some testing, but it runs great from AICS mags or from a single shot sled in the Archimedes.)
If you're running a cartridge that will run out of an AW mag, my preference is for the AW mag over a single stack AICS mag any day, in which case I like the CDG. While I really like my CDG running 22GT out of AW mags, I have no plans to switch my 223AIs, 20VT, or 7 PRC to CDG actions as they're all single stack mag cartridges. Especially the 223AIs, as my Archimedes feeds the 223AIs smooth like butter out of the mag or single loading even running the bolt slowly, where there's been plenty of reports here of the CDG needing a bit of "gusto" to feed and chamber 223AI reliably.
If I build another rifle that will run from AW mags I'll be picking up another CDG. Sometimes I'm tempted to sell my 6 dasher AXSA and replace it with a CDG just so I can have more options for stocks and chassis, but I still have 2 more 6 Dasher barrels for the AI to burn up and I really like the AXSA.
I'd love to know how many CDG's ARC has made compared to the Archimedes... I'm guessing they've already made 4-6x+ more CDG's than the entire run of Archimedes.
I really like this stock but can't find where to order one.
how much do they go for? it might be perfect for my 22 build coming up...
Last edited:
Had Fritz at Black Canyon Customs modify and coat it for me from a spare handle I bought from ARC, after seeing how @JaredCO had his and how it came out. I really like it and wish I could’ve gotten it this way from the start! I definitely see why people love the AI bolt handle form now
Unless you’re in Australia you can only get them directly from Benchmark Barrels. They aren’t advertising them. I’d recommend you call or e-mail benchmark barrels directly. They aren’t cheap stocks… definitely over 1k. I don’t remember the exact price.
Attachments
My suggestion, just get the MDT adjustable dbm. It's pretty badass. Has the same adjustment system for the latch as the new MDT elite chassis.
if I cut it once I'll be done and thanks to the kind fellers at foundation I have some good rough measurements to grind it to tomorrow after I paint again.
always lessons to be learned.
What color is that MPA chassis? Tungsten? Going to be ordering an PMR soon debating between tungsten and black.
Very nice. I like the cdg over just about everything out right now.
