• Get 30% off the first 3 months with code HIDE30

    Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.

    Subscribe
  • Having trouble using the site?

    Contact support

Maggie’s Motivational Pic Thread v2.0 - - New Rules - See Post #1


I had a Great Pyrenees once, they are wonderful dogs, and great protectors. Video in the link, it’s worth watching.
love those dogs........
 
  • Like
Reactions: lash and sandhiller
1724554831493.png
 

I really like listening to him…a bit bombastic, but he’s sharp, and a no bullshit kinda guy. A lot like Rush was, now that I think about it.

I still think Mark Steyn was the best of Rush’s guest hosts, and wish he would have taken over that time slot…and frankly the EIB network, but understand why they went the direction they did with Clay and Buck. That said, I think Joe Pags is the closest we have to what Rush used to do right now…he’s actually local(ish) to me here, and I hope his show’s audience continues to expand.

Pic thread rules: Clean up after yourselves, ya filthy animals!

i-tFcktHr-X4.jpg
 
And you wouldn’t take the best offer you could get? Why is that a Kennedy thing and not just a human nature thing?
Other than his stance on 2A, I like Kennedy. His heart is in the right place and he's got a hell of a lot more integrity than the dnc or his "family" members that just dogpiled on him. If anything, I'm surprised at his level of restraint (against the dnc) when he gave his speech on Friday.

For the life of me though, I can't figure out why the dims wanted to keep him off the ballot. It was pretty well known that he was taking more votes from Trump than he was fromFJB/FKH. Wasn't a bright move, we'll see how it works out.
 
I can't figure out why the dims wanted to keep him off the ballot

Because he wouldn't make a perfect puppet, too independent, too much ego, articulate, possesses at least some critical thinking skills ...

Plus he dug up his ex-wife's body and moved it, about as close as you can get to literally a skeleton in the closet.

Other than that, he wants to ban assault weapons and his entire platform is built on bigger government, more government control and more taxes. The only thing about a platform like that for liberals not to love is his promise to remove corrupted officials.

iu


iu
 
Last edited:
I really like listening to him…a bit bombastic, but he’s sharp, and a no bullshit kinda guy. A lot like Rush was, now that I think about it.

I still think Mark Steyn was the best of Rush’s guest hosts, and wish he would have taken over that time slot…and frankly the EIB network, but understand why they went the direction they did with Clay and Buck. That said, I think Joe Pags is the closest we have to what Rush used to do right now…he’s actually local(ish) to me here, and I hope his show’s audience continues to expand.

Pic thread rules: Clean up after yourselves, ya filthy animals!

i-tFcktHr-X4.jpg

Slight derail here.
Is that Ultrasonic worth the money?
Vevor also sells a number of them that seem like they are with the asking price.
Inquiring minds want to know.



Now back to your regularly scheduled program.



A-cup titties

20190105_190140.jpg


Our resident @atepointer sharing his PBJ.

20191107_115324.jpg


IIRC, that old chap was butts, backstraps and bacon a week later.
 
And you wouldn’t take the best offer you could get? Why is that a Kennedy thing and not just a human nature thing?
I don't believe it is a total human thing it is a politician human thing....anything to stay in the limelight regardless of how vouch power you have or are perceived to have.

With people that have principles ingrained in them this decision does not come into play.
 
Is that Ultrasonic worth the money?

I bought it from Harbor Freight about a year ago when my last one shit the bed. It’s held up surprisingly well so far, and I like the larger capacity over my last one.

All stainless construction…well, Chinesium stainless anyway, but so far it’s worked great. The heating element is very robust too; again, so far. I’m under no illusions that a sub-$200 machine will last a lifetime, but it’s held up to at least weekly, and usually 2-3 times per week use for about a year so far.

I typically run it 30-40 minutes at a time at 40*C with suppressor baffles/ cores and stripped-down bolt carriers after a pig hunt at the ranch, or after a range session if we did more than just sighting in. I’ll change out the water and run it for 2-3 more cycles if needed.

Side note: That Royal Purple ultrasonic cleaner additive will absolutely strip Cerakote, anodizing , and everything else off your parts if you use more than about a teaspoon full in a gallon of water! I typically just use Lucas cleaner and/or powdered soap flakes in the tank now.
 
I bought it from Harbor Freight about a year ago when my last one shit the bed. It’s held up surprisingly well so far, and I like the larger capacity over my last one.

All stainless construction…well, Chinesium stainless anyway, but so far it’s worked great. The heating element is very robust too; again, so far. I’m under no illusions that a sub-$200 machine will last a lifetime, but it’s held up to at least weekly, and usually 2-3 times per week use for about a year so far.

I typically run it 30-40 minutes at a time at 40*C with suppressor baffles/ cores and stripped-down bolt carriers after a pig hunt at the ranch, or after a range session if we did more than just sighting in. I’ll change out the water and run it for 2-3 more cycles if needed.

Side note: That Royal Purple ultrasonic cleaner additive will absolutely strip Cerakote, anodizing , and everything else off your parts if you use more than about a teaspoon full in a gallon of water! I typically just use Lucas cleaner and/or powdered soap flakes in the tank now.
What is the Lucas cleaner you speak of? Ever tried it on plastic wad fouling?
 
Because he wouldn't make a perfect puppet, too independent, too much ego, articulate, possesses at least some critical thinking skills ...

Plus he dug up his ex-wife's body and moved it, about as close as you can get to literally a skeleton in the closet.

Other than that, he wants to ban assault weapons and his entire platform is built on bigger government, more government control and more taxes. The only thing about a platform like that for liberals not to love is his promise to remove corrupted officials.

iu


iu
OK, all good points, except for one great big Goose Egg. He would have never come close to winning. He would have served to have sucked enough votes off of Trump that FKH would have stood a better chance of winning.
 
What is the Lucas cleaner you speak of? Ever tried it on plastic wad fouling?

i-CjxRf96-X4.jpg


I keep a small bottle of it with a needle oiler in my range bag too; seems to work better than Hoppe’s #9 for cleaning carbon off bolts, etc…but I like the way Hoppe’s smells though, so I still use that as my primary gun parts cleaner! LoL
 
I have been told that if you put all of you cleaning solution and parts into a ziplock bag, then immerse in distilled water in the tank, it will extend the life of of the transducer. Dunno of its true, but I’ve been doing it anyway.
I use regular tap water and solutions in a glass jar.
I use ultrasonic tanks in my job and do this often with specialized petroleum distillates with watch movement parts in steel baskets.
I use a glass jar with a transducer head epoxied to the side and below the fluid level on another machine.
The waves go through both the jars and will go through the plastic bag with ease.
Plastic will dissolve with some of the cleaners though.
I will leave a tank running all day every day They eventually get weak but it takes 5+ years for a good one to go. Not tried the China ones.