Need a better muzzle brake

wvfarrier · Sep 30, 2024

I have a couple different 300 PRC rifles, big fan of the cartridge. However, ever since I had my shoulder repaired the recoil is kicking my ass. I m currently using a PVA Jetblast but it just is not doing enough. I regularly shoot hot 308s and even hot 45-70 with no issues but the 300 is starting to cause a flinch. Its a Zermatt action with a 26" bull barrel in a MDT chassis so it is quite hefty. What brakes would you guys recommend? I was looking at the different "tank" style brakes but dunno if they are worth it.

BobinNC · Sep 30, 2024

I'd start here:

Best Muzzle Brake – What The Pros Use

oldrifleman · Sep 30, 2024

If you don’t care about those around you get either a CHAD or a gen 3 Fat Bastard. If you care about those around you get a CHAD or an ATS.

FuhQ · Sep 30, 2024

The best muzzle brake you can buy... And people around you won't hate you...

Thunder Beast: Magnus-HUB Suppressor

The MAGNUS HUB is the quietest .30 cal suppressor on the market for everything -- .223's, 6mm's, 6.5mm's, 7mm's, and .30's -- up to .300 Norma Magnum.

www.milehighshooting.com

oldrifleman · Sep 30, 2024

Yeah, I will give that one to you TBAC Magnus for the win.

kl3309 · Sep 30, 2024

wvfarrier said:
...currently using a PVA Jetblast but it just is not doing enough...

Augment with squishier recoil pad:

Backstop Recoil Pad

The Backstop recoil pad is a revolutionary design that is customized to your own rifle's recoil level. It comes with the "throne" protector for storage and has a unique dampening profile. Backstops are made to fit nearly every rifle style.

backfireshop.com

Direct replacement for MDT in the drop-downs.

Edsel · Sep 30, 2024

How much does your rifle weigh?

HMRamateur · Sep 30, 2024

wvfarrier said:
I have a couple different 300 PRC rifles, big fan of the cartridge. However, ever since I had my shoulder repaired the recoil is kicking my ass. I m currently using a PVA Jetblast but it just is not doing enough. I regularly shoot hot 308s and even hot 45-70 with no issues but the 300 is starting to cause a flinch. Its a Zermatt action with a 26" bull barrel in a MDT chassis so it is quite hefty. What brakes would you guys recommend? I was looking at the different "tank" style brakes but dunno if they are worth it.

Get a Cadex MX1. People talk highly of the heathen brake, which I also have, but I feel like the cadex is better at mitigating recoil.

PappyM3 · Sep 30, 2024

Here are some objective data using a 300 PRC rifle:

The Apollo Max had the most significant reduction, of those tested.

Also, these weren’t tested and look a bit silly, but I’m sure they work real well.

JP - Recoil Eliminators

Gryntch · Oct 1, 2024

The best I've found is precision armament hypertap I use them on my 06 and 270 and can shoot 30 rounds with no impact to my 75 year old shoulder

45-90 · Oct 1, 2024

I use the Precision Armament M4-72 on my 300 RUM shooting 250 ATips at 2985 fps from 26" barrel. I like it because its short and does a good job...but this video shows there may be other choices that work better.

wvfarrier · Oct 1, 2024

Edsel said:
How much does your rifle weigh?

14.6 pounds with the Sig Tango 6 on it

Gryntch · Oct 1, 2024

Hypertap reduces felt recoil 84% in 30 caliber

Mike Casselton · Oct 1, 2024

kl3309 said:
Augment with squishier recoil pad:

Backstop Recoil Pad

The Backstop recoil pad is a revolutionary design that is customized to your own rifle's recoil level. It comes with the "throne" protector for storage and has a unique dampening profile. Backstops are made to fit nearly every rifle style.

backfireshop.com

Direct replacement for MDT in the drop-downs.

I'm a MDT owner and I would have to agree 100% to change the recoil pad before you make any other changes.

It's probably about $40 for a new pad.

Slides · Oct 1, 2024

ATP make limbsaver adapters I have fitted them on all my MDT chassis and on a friend's Oryx with 308. Much more pleasant to shoot.

moosemeat · Oct 1, 2024

Not 100% TBAC related, but don't most actual test with equipment and data show suppressors do not match brakes for recoil reduction and that suppressors with brakes have to low of velocity to be of significant use to do much for recoil reduction?
This is a actual question after having read about brakes vs suppressors and looked at the limited data combined with the general reduction of the number of suppressors being used by top PRS shooters.
Real question.

ETA - Fat B* gen 2 is very pleasant to shoot on 300wm with 215s at mach Jebus. Just not pleasant for people around you....

PappyM3 · Oct 1, 2024

moosemeat said:
… don't most actual test with equipment and data show suppressors do not match brakes for recoil reduction …

Yes. The sound reduction has a psychological effect of perceived recoil reduction, because less harsh sound is associated with less harsh recoil. Silencers do help recoil reduction purely because they are additional mass. Mass is a good method of recoil reduction, but a silencer’s mass is generally not as significant as the recoil reduction from a good brake.

Darryle · Oct 1, 2024

None of y'all like the Terminator brakes?

Slides · Oct 1, 2024

Darryle said:
None of y'all like the Terminator brakes?

I have them on several full profile barrels, 300winmag, 300 Norma, 7PRC & a 6.5PRC on the way. I usually wear plugs under electronic muffs but the Terminator is actually comfortable with only plugs.

I do run sound forwarders on "standard" cartridges as it is much more pleasant for everyone and recoil reduction is enough.

Edsel · Oct 2, 2024

wvfarrier said:
14.6 pounds with the Sig Tango 6 on it

I would think that any three - port (or more) brake would do.

MikeRTacOps · Oct 2, 2024

HOLD ON A FUCKING SECOND... LOL

Christmas came early for you PM me all your information including your contact number....

I'll send you a Tac Ops for free

Mike R.

BruceLeroy · Oct 2, 2024

Damn, I wish I would have started this thread!

MikeRTacOps · Oct 2, 2024

BruceLeroy said:
Damn, I wish I would have started this thread!

Would you like one as well? I'm not cheap lol

Mile R.

DJL2 · Oct 2, 2024

We doing Tac Ops brakes? Mmmm... I could always use one! ;-)

Alabusa · Oct 2, 2024

T4 Terminator ftw!

wvfarrier · Oct 2, 2024

MikeRTacOps said:
HOLD ON A FUCKING SECOND... LOL

Christmas came early for you PM me all your information including your contact number....

I'll send you a Tac Ops for free

Mike R.

Sent and damn! Thank you

Wannashootit · Oct 2, 2024

PappyM3 said:
Here are some objective data using a 300 PRC rifle:

The Apollo Max had the most significant reduction, of those tested.

Also, these weren’t tested and look a bit silly, but I’m sure they work real well.

JP - Recoil Eliminators

The JP Recoil Eliminator is fugly- but I gotta say, I've not used a more effective brake. The huge blast baffles are the key to its effectiveness. The PA M4-72 is also a favorite, marketed as a compensator but I find it very effective at reducing felt recoil.

The recoil pad on my MDT sucks dick. Hard plastic covered by a thin piece of rubber- that ain't helping.

Thought about one of these- no affiliation- curious if anyone has experience with it?

Slides · Oct 2, 2024

Wannashootit said:
The JP Recoil Eliminator is fugly- but I gotta say, I've not used a more effective brake. The huge blast baffles are the key to its effectiveness. The PA M4-72 is also a favorite, marketed as a compensator but I find it very effective at reducing felt recoil.

The recoil pad on my MDT sucks dick. Hard plastic covered by a thin piece of rubber- that ain't helping.

Thought about one of these- no affiliation- curious if anyone has experience with it?

Just price compare one of these deliverered to you as well. The backfire ones are "to spec" but if the cost is significantly different you may find better use for the money elsewhere. I have fitted these to all my MDT chassis and the Oryx 308 I set up for a friend, massive improvement in comfort and recoil control.

ATP Limbsaver Recoil Pad and Adaptor for MDT Chassis and Buttstocks - Australian Made

We only use quality gear at Australian Tactical Precision (ATP), this principal also extends to the products we manufacture. We are big fans of the MDT chassis and buttstocks. One thing that we wanted to improve on was the recoil pad, and nothing is as good as a Limbsaver. So we made an adaptor...

australiantacticalprecision.com.au

AMMOWASTER · Oct 2, 2024

Wannashootit said:
The JP Recoil Eliminator is fugly- but I gotta say, I've not used a more effective brake. The huge blast baffles are the key to its effectiveness. The PA M4-72 is also a favorite, marketed as a compensator but I find it very effective at reducing felt recoil.

The recoil pad on my MDT sucks dick. Hard plastic covered by a thin piece of rubber- that ain't helping.

Thought about one of these- no affiliation- curious if anyone has experience with it?

I knew a guy with one of those on a 300 Win Mag and he said it was unbelievable how much recoil it removed. Pretty sure there used to be videos with a JP equipped magnum rifle and the shooter would hold it up against his nose and shoot it to show almost zero movement.

tacoman69 · Oct 3, 2024

Wannashootit said:
The JP Recoil Eliminator is fugly- but I gotta say, I've not used a more effective brake. The huge blast baffles are the key to its effectiveness. The PA M4-72 is also a favorite, marketed as a compensator but I find it very effective at reducing felt recoil.

The recoil pad on my MDT sucks dick. Hard plastic covered by a thin piece of rubber- that ain't helping.

Thought about one of these- no affiliation- curious if anyone has experience with it?

instead of supporting a cuck try this instead

https://oldballsinc.com/products/copy-of-mdt-rear-bag-rider

BruceLeroy · Oct 3, 2024

MikeRTacOps said:
Would you like one as well? I'm not cheap lol

Mile R.

Seriously? I will PM you...

MikeRTacOps · Oct 3, 2024

BruceLeroy said:
Seriously? I will PM you...

Pm me

wooferocau · Oct 4, 2024

Darryle said:
None of y'all like the Terminator brakes?

Love em... i use T5 and T6..

cyranis · Oct 4, 2024

The best muzzle brake you can buy... And people around you won't hate you...

Let em hate me, hopefully they leave, and then I can sprawl out to two tables. I always bring too many rifles and I almost always use hellfire matches just because I'm bought into the mounting system. It's easy, and I can be lazy.

Plus, i'm usually doing some sort of load dev, which means I want whatever i'm running for the match on my rifle.

alfack · Oct 4, 2024

I was not a huge fan of muzzle brakes. Getting older has changed my POV a little. I have only tried one, but it really does the trick. It's the SPT Hudu. I like that it has holes on the top. I believe it directs some of the gas upwards, which keeps it from jumping as much.

bohem · Oct 4, 2024

wvfarrier said:
I have a couple different 300 PRC rifles, big fan of the cartridge. However, ever since I had my shoulder repaired the recoil is kicking my ass. I m currently using a PVA Jetblast but it just is not doing enough. I regularly shoot hot 308s and even hot 45-70 with no issues but the 300 is starting to cause a flinch. Its a Zermatt action with a 26" bull barrel in a MDT chassis so it is quite hefty. What brakes would you guys recommend? I was looking at the different "tank" style brakes but dunno if they are worth it.

The PVA Jetblast was designed for smaller cartridges, you should be using our Shockwave brake for the PRC. It alson won't turn your sinuses into jello.

Shockwave Muzzle Brake

Cut recoil and muzzle rise, increase accuracy with the self-timing Shockwave. Easy install, no machining or gunsmithing required. At PVA, we engineer repeatability. 100% made in USA.

patriotvalleyarms.com

moaorbust · Oct 4, 2024

The Area 419 Sidewinder turned my win mag into a kitten.

wvfarrier · Oct 4, 2024

bohem said:
The PVA Jetblast was designed for smaller cartridges, you should be using our Shockwave brake for the PRC. It alson won't turn your sinuses into jello.

Shockwave Muzzle Brake

Cut recoil and muzzle rise, increase accuracy with the self-timing Shockwave. Easy install, no machining or gunsmithing required. At PVA, we engineer repeatability. 100% made in USA.

patriotvalleyarms.com

Thank you. Tacops is sending my one of his to try out and evaluate with the PRC.

45-90 · Oct 4, 2024

I like short, light, muzzle brakes. Sometimes build my own. Like this one ounce titanium brake, built free out of a scrap piece of Ti, for a 6 lb AR 10 308 build.

markl323 · Oct 4, 2024

One way is to add weight to the gun (23+ lbs) and shoot free recoil. You won't feel anything.

45-90 · Oct 5, 2024

markl323 said:
One way is to add weight to the gun (23+ lbs) and shoot free recoil. You won't feel anything.

Probably depends on the caliber...won't be doing that with full power 50 BMG that weighs 30 lbs with 750 Amax or 800 gr Barnes. Infact subs recoil quite a bit with 750 grains, and one can jump up to 1002 gr lathe turned with a fast twist barrel, and feel even more recoil....I would not recommend the free recoil method here.

bohem · Oct 7, 2024

45-90 said:
I like short, light, muzzle brakes. Sometimes build my own. Like this one ounce titanium brake, built free out of a scrap piece of Ti, for a 6 lb AR 10 308 build. View attachment 8517289

Crazy as it sounds, that's still heavier than our self-timing 3 port "Back Country" ultralight and only 0.3oz lighter than the UL Jetblast.

markl323 · Oct 8, 2024

45-90 said:
Probably depends on the caliber...won't be doing that with full power 50 BMG that weighs 30 lbs with 750 Amax or 800 gr Barnes. Infact subs recoil quite a bit with 750 grains, and one can jump up to 1002 gr lathe turned with a fast twist barrel, and feel even more recoil....I would not recommend the free recoil method here.

absolutely! my suggestion is only for OP's 300 PRC.

45-90 · Oct 8, 2024

bohem said:
Crazy as it sounds, that's still heavier than our self-timing 3 port "Back Country" ultralight and only 0.3oz lighter than the UL Jetblast.

Show me!...
That ain't what I saw, your brakes were 3.7 and 3.8 oz. Stated weight.
You have a .7 oz steel muzzle brake a mere 300 grs? If so is it Effective? And where can it be found.

Mine was 1 oz total weight, attached to the barrel, and free not $125 or $144. Plus I could make it lighter, but it works great at 1 oz.

bohem · Oct 8, 2024

45-90 said:
Show me!...
That ain't what I saw, your brakes were 3.7 and 3.8 oz. Stated weight.
You have a .7 oz steel muzzle brake a mere 300 grs? If so is it Effective? And where can it be found.

Mine was 1 oz total weight, attached to the barrel, and free not $125 or $144. Plus I could make it lighter, but it works great at 1 oz.

Ahhh, but I never said it was steel nor did I say it was 0.7oz. You assumed the material and didn't get the arithmetic correct.

Here's the full size Jetblast in ultralight form, that one weighs 39 grams, which your brake is 0.3oz different. It's the same geometry as the regular Jetblast.

Ultralight "Jet Blast" Muzzle Brake

The lightest precision muzzle brakes available for precision rifles. No machining required! Extreme accuracy and precision. At PVA we engineer repeatability downrange. 100% Made in USA

patriotvalleyarms.com

The ultralight Back Country is 0.9oz, here's a photo of a processing blem sitting on the shipping scale.

Yours wasn't free, you had to spend time and effort doing that. Count your time up and whatever supplies you used in your shop to make it. As far as performance goes, the Jetblast recoil reduction is well documented by several outside sources to far exceed 50% reduction in recoil.

45-90 · Oct 8, 2024

bohem said:
Ahhh, but I never said it was steel nor did I say it was 0.7oz. You assumed the material and didn't get the arithmetic correct.

Here's the full size Jetblast in ultralight form, that one weighs 39 grams, which your brake is 0.3oz different. It's the same geometry as the regular Jetblast.

Ultralight "Jet Blast" Muzzle Brake

The lightest precision muzzle brakes available for precision rifles. No machining required! Extreme accuracy and precision. At PVA we engineer repeatability downrange. 100% Made in USA

patriotvalleyarms.com

The ultralight Back Country is 0.9oz, here's a photo of a processing blem sitting on the shipping scale.

Yours wasn't free, you had to spend time and effort doing that. Count your time up and whatever supplies you used in your shop to make it. As far as performance goes, the Jetblast recoil reduction is well documented by several outside sources to far exceed 50% reduction in recoil.

Just as I thought...it's aluminum.
I do not consider Aluminum a viable material for muzzle brakes, and would never purchase one, made of aluminum for my use.
I use stainless steel or titanium, on my rifles.

I would consider one of your "heavier" stainless steel brakes, depending on caliber, shorten it up a bit, depending on need, or go with titanium, for ultra light builds.

I buy some brakes, modify some brakes, but also make my own to suit, out of left over pieces of metal, stainless or titanium.
It does take a bit of time, but I'm doing it for myself, so for me that doesn't count, and I get what I desire, especially on specialty builds.

oldrifleman · Oct 8, 2024

I wish I had the time/equipment/experience to do that!

bohem · Oct 8, 2024

45-90 said:
Just as I thought...it's aluminum.
I do not consider Aluminum a viable material for muzzle brakes, and would never purchase one, made of aluminum for my use.
I use stainless steel or titanium, on my rifles.

I would consider one of your "heavier" stainless steel brakes, depending on caliber, shorten it up a bit, depending on need, or go with titanium, for ultra light builds.

I buy some brakes, modify some brakes, but also make my own to suit, out of left over pieces of metal, stainless or titanium.
It does take a bit of time, but I'm doing it for myself, so for me that doesn't count, and I get what I desire, especially on specialty builds.

You may not consider it viable but this particular aluminum is stronger and harder than mild steel, which is why we use it. Incidentally it's also stronger than Ti6Al4v Type 2 and about half the weight. Once anodized now the surface and the core are harder and stronger than the steel most companies make brakes from.

There are many thousand examples of these brakes on the market for over 5 years now. If it didn't work, we wouldn't be able to sell them nor would I even try. I'll stand by the statement that I've made for just as long as we've offered these brakes:

The PVA Ultralight series is the lightest, highest performing ultralight brake series in their respective market segments. Size to size and weight to weight; we win on weight to performance, cost to performance and size to performance time and time again.

You seem to have some pretty strong opinions of a product line that you have no experience with. If you don't want to count your time, cost and effort that's your prerogative. However, comparing that to my actual business is far from applicable. If you don't want to use aluminum it's simple: don't buy it. Plenty of people have and they're quite happy with them.

moosemeat · Oct 8, 2024

And PVA brakes work. Also quiter than my Fat B*.
45-90- yours looks like it has single side pirts and a single top port. Is that correct? I have played around with building muzzle brakes with 5 axis cnc milling and never got results I like in either recoil reduction or appearance.

45-90 · Oct 8, 2024

moosemeat said:
And PVA brakes work. Also quiter than my Fat B*.
45-90- yours looks like it has single side pirts and a single top port. Is that correct? I have played around with building muzzle brakes with 5 axis cnc milling and never got results I like in either recoil reduction or appearance.

One can put as many ports as you want, or as few, depending on the purpose of the brake and the intended recoil reduction.
Lighter calibers, or big magnums, shorter overall length for handy hunting tool, Or maximum recoil reduction, where length or weight does not matter.
That's why there is a variety of brakes on the market, it's not totally about maximum recoil reduction, sometimes other desired needs must be met first.
Variety is a good thing.
Beauty is in the eye of the beholder.
Function would seem more important on a tool, a rifle is an expendable tool, like most tools, it needs replacement parts from time to time to be at it's best performance.
I even run without a brake on purpose on some rifles, others may want a brake on every rifle.

Having trouble using the site?

Need a better muzzle brake

Ignorant wretch

Petty Officer

Sergeant

Unreconstructed

Sergeant

Unburdened by your skank ho diversity hire.

Gunny Sergeant

Will work for powder

Sergeant of the Hide

Sergeant of the Hide

Major Hide Member

Ignorant wretch

Sergeant of the Hide

No, I just wear the T-shirt

Sergeant of the Hide

30Hate club founding member

Sergeant of the Hide

My Squirrel is locked in a Faraday Cage

Sergeant of the Hide

Gunny Sergeant

Private

Private

Private

Retired Sapper

Learning

Ignorant wretch

Gunny Sergeant

Sergeant of the Hide

Sergeant

Sergeant of the Hide

Private

Private

Private

Attachments

Private

Private

PVA's HMFIC

You make the lord very nervous...

Ignorant wretch

Major Hide Member

Sergeant of the Hide

Major Hide Member

PVA's HMFIC

Sergeant of the Hide

Major Hide Member

PVA's HMFIC

Attachments

Major Hide Member

Sergeant

PVA's HMFIC

30Hate club founding member

Major Hide Member

Similar threads