First, I got my second die set from WTC (first was 50 BMG, now 375 CT) and this thread is not about the dies per se, but rather about WTC recs to NOT use water soluble lubes (most of them including RCBS) because they can cause rust inside the die. They recommend STP oil additive +/- dilution with 20% 30 weight motor oil (because STP is so thick). I've been using this and it works great but this is the first time in my 30+ years reloading that I came across this suggestion. Would 90 weight gearbox oil work too? Because I have leftover of that from my motorcycle maintenance days.
Next, for (occasional) primer pocket cleaning, I used to use the RCBS wire thingies, but a while back I just started using a PP uniformer set at factory specs. It doesn't engage the brass of the PP, but it does clean the carbon down to a uniform depth very nicely, and I don't worry about it gouging the sides or going too deep.
Maybe I'm late to the party on one or both of these things. Opinions and experiences invited.
Next, for (occasional) primer pocket cleaning, I used to use the RCBS wire thingies, but a while back I just started using a PP uniformer set at factory specs. It doesn't engage the brass of the PP, but it does clean the carbon down to a uniform depth very nicely, and I don't worry about it gouging the sides or going too deep.
Maybe I'm late to the party on one or both of these things. Opinions and experiences invited.