Accuracy International Picture Thread

The AXSR trigger is its own thing and the only trigger for the AXSR as far as I’m aware.

Two triggers. The first was 3,000% my bad as it went down at 4,200rds with no cleaning out here in the desert.

The spare trigger was put in 1,000rds ago…and has been cleaned/flushed each time I cleaned the rifle (every 200~ rds).

So here I am…ripping it back apart fuckin 2 days before regionals 😂🤣😢🥲☹️
I'm still pissed they decided to screw with the OG trigger for the ASR (cost them the contract) and AXSR. For the AXSR, they claim it's the same OG trigger in a new housing to fit the AXSR, BUT it can be adjusted to a lower pull weight (don't need it, don't want it), and for some reason people are experiencing failures like you when they didn't with the old trigger.

What exactly happened to yours both times?
 
The AXSR trigger is its own thing and the only trigger for the AXSR as far as I’m aware.

Two triggers. The first was 3,000% my bad as it went down at 4,200rds with no cleaning out here in the desert.

The spare trigger was put in 1,000rds ago…and has been cleaned/flushed each time I cleaned the rifle (every 200~ rds).

So here I am…ripping it back apart fuckin 2 days before regionals 😂🤣😢🥲☹️
its seems what could be is still burdened by what has been.
 
I knowwwwwwwwwww I knowwwwwwwwwwwwwwwwwwwww
And here I thought AI was the most bombproof Platform ever


Right @Huskydriver
@TheBigCountry over here....
stirring-the-pot-gif-2.gif
 
I'm still pissed they decided to screw with the OG trigger for the ASR (cost them the contract) and AXSR. For the AXSR, they claim it's the same OG trigger in a new housing to fit the AXSR, BUT it can be adjusted to a lower pull weight (don't need it, don't want it), and for some reason people are experiencing failures like you when they didn't with the old trigger.

What exactly happened to yours both times?
Right????
Yea I don’t want or need an adjustable trigger and I was disappointed when I bought it that the OG trigger was never an option. …so I bought a spare just in case.

So the firing pin de-cocks as I run the bolt forward. Slow, fast, pressure left/right/up, etc.

Triggers both blown out with brake cleaner and lighter fluid with an air compressor multiple times. Went back to just lighter fluid, seemed to last longer/better (not saying much) than brake cleaner.

Contacted MH AI repair center so I’ll get my OG sent off soon and then send off the spare once it’s back.

Might buy an ultrasonic soon to maybe help really get any fine sand/shit that the flush/blow isn’t getting. …that and fuck cleaning brakes and BCGs by hand in 2024 😂

But yea, was about to fuckin chuck the rifle into the woodchipper and buy a bergara, like a pro.
 
Right????
Yea I don’t want or need an adjustable trigger and I was disappointed when I bought it that the OG trigger was never an option. …so I bought a spare just in case.

So the firing pin de-cocks as I run the bolt forward. Slow, fast, pressure left/right/up, etc.

Triggers both blown out with brake cleaner and lighter fluid with an air compressor multiple times. Went back to just lighter fluid, seemed to last longer/better (not saying much) than brake cleaner.

Contacted MH AI repair center so I’ll get my OG sent off soon and then send off the spare once it’s back.

Might buy an ultrasonic soon to maybe help really get any fine sand/shit that the flush/blow isn’t getting. …that and fuck cleaning brakes and BCGs by hand in 2024 😂

But yea, was about to fuckin chuck the rifle into the woodchipper and buy a bergara, like a pro.
Does the OG trigger fit the AXSR?
 
Anyone have an AXMC LE? Interested in the updates to the AXMC LE versus the commercial AXSR. I’m familiar with the differences between the MC and XR, but specifically the LE

Only diff are 20mos top rail vs 30 moa on the og
Integrated arca on the magwell and forend
Le stamped on the port side

That's it
 
What's the going rate on take of 6.5creedmoor barrels from all the atx/xc rifles? Trying to decide if I want to just get one or buy a blank (I do my own work but metric is a tallywacker pincher on my lathe)


Depending on if you get any kind of discount, it is close to $1K or about $925 or so for a factory barrel from the vendors by the time taxes and shipping are done.

You can also get a prefit from Proof. If you do the Expert Voice thing, they are about $300 less than a factory barrel.

My last barrel I got done was a 1:7.5, .237 Krieger that I had Matt Stewart do up for me in 6GT. Cost was pretty comparable to just getting a factory barrel. I trust Matt's work a lot more, but my two AI factory barrels shoot great too. Cost was like $440ish for the barrel, $325ish for the chambering and another $90ish for Cerakote. It is a frigging hammer. Obviously if you do your own work, you're saving about $450-500 by just getting a blank vs. getting a factory barrel.
 
I just want to report that I thought that I was being très witty when I made up the phrase, “tits ahoy” in a different thread.

Two secs later while smugly googling to confirm, I found someone, a gdamn porno director, beat me to it by 20 yrs. Sigh. Nothing under the sun is new.

And yes, apparently IMDB might have plot summaries for pornos now (if someone fills them out).

roolz
1728687241994.png
 
What's the going rate on take of 6.5creedmoor barrels from all the atx/xc rifles? Trying to decide if I want to just get one or buy a blank (I do my own work but metric is a tallywacker pincher on my lathe)

Depending on if you get any kind of discount, it is close to $1K or about $925 or so for a factory barrel from the vendors by the time taxes and shipping are done.

Wow.

A 26” barrel in .308 Winchester made by AINA / Bartlein / Tooley was worth $799 pre - tax, retail - from EuroOptic, in 2016.
 
  • Like
Reactions: BurtG
Wow.

A 26” barrel in .308 Winchester made by AINA / Bartlein / Tooley was worth $799 pre - tax, retail - from EuroOptic, in 2016.

1) I realized later that he said "take off", and my post was rather useless. Even more than usual.

2) Yep, everything has gone way up. I just saw a video title along the lines of "My $12,xxx PRS Rifle" by Phillip Velayo (sp) on YouTube. Good for the guys that want to go that route. It ain't me though.
 
  • Haha
Reactions: BurtG
1) I realized later that he said "take off", and my post was rather useless. Even more than usual.

2) Yep, everything has gone way up. I just saw a video title along the lines of "My $12,xxx PRS Rifle" by Phillip Velayo (sp) on YouTube. Good for the guys that want to go that route. It ain't me though.
29lbs, just finished watching it


I have a 26” oem 6cm barrel i think about unloading. 50 rds if that; certainly a hammer, balances the at-x great btw. Not for most of ppl here because i sprayed it before i even shot.
 
How bout take off M30 AI barrels? Even looking around for 1.350” blanks to get something spun up made me feel poor.
She took the cat.
Good, you can get a dog now.
Wow.

A 26” barrel in .308 Winchester made by AINA / Bartlein / Tooley was worth $799 pre - tax, retail - from EuroOptic, in 2016.
AXSR used to be a $9K retail rifle.

Roaring 20s indeed…