Entry Level Build after CDG Price Bump

Berkenen · Oct 16, 2024

Been out of the loop for a while after I sold my Curtis, and I know "search is my friend" but none of the starter/entry build threads were after the ARC CDG increased in price. If it was still the old price I would 100% get the CDG for $899, but now that it's almost the price of a TL3 does that change opinions on the go-to entry starter action?

Sounds like major contenders for this entry price point (R700 footprint) are still Origin, Solus, ARC Nucleus, any others I'm forgetting? Any thoughts?

Simonsza1 · Oct 16, 2024

Probably everyone is going to tell you the solus. I’ve fondled one and it’s nice especially for the cost. I personally didn’t like it but I guess for the price maybe??? However buy once cry once always plays out. So the cdg or something used in the px is worth the extra jingle imo.

Berkenen · Oct 16, 2024

Yeah I'm honestly surprised, when I dropped out of the Hide it seemed like the Solus wasn't very well received, but there seems to be a lot of enthusiasm or general support for it now.

Simonsza1 · Oct 16, 2024

Look it’s just my opinion but I felt the solus when I played with it was probably worth what it cost. For me I’m not building a full rifle and sacrificing a few hundred dollars on the action. I own two cdg and even at the new cost for me I would get it before the solus without question. Those on here who say there similar are simply smoking crack or some type of fan boy. At least I admit I’m an arc fanboy but it’s hands down nicer then the solus and worth the extra money imo.

diggler1833 · Oct 16, 2024

I still think that the Origin is one of the best 'lower cost' options.

Baron23 · Oct 16, 2024

Berkenen said:
Been out of the loop for a while after I sold my Curtis, and I know "search is my friend" but none of the starter/entry build threads were after the ARC CDG increased in price. If it was still the old price I would 100% get the CDG for $899, but now that it's almost the price of a TL3 does that change opinions on the go-to entry starter action?

Sounds like major contenders for this entry price point (R700 footprint) are still Origin, Solus, ARC Nucleus, any others I'm forgetting? Any thoughts?

Ah, I don’t think of the CDG as a “starter action”. It’s full featured and while barrels may come and go, you prob will keep a top qual action for a long time so…not where I'd look to pinch a penny.

Lots of good actions out there but IMO the CDG is worth its current price.

TheJeanyus · Oct 16, 2024

Hard to beat an Origin for the money.

Berkenen · Oct 16, 2024

Baron23 said:
Ah, I don’t think of the CDG as a “starter action”. It’s full featured and while barrels may come and go, you prob will keep a top qual action for a long time so…not where ivv be would look to pinch a penny.

Lots of good actions out there but IMO the CDG is worth its current price.

Not to stray too far from the "entry" level price point, but if I would go up to the current price of a CDG, and we're all in agreement on "buy once cry once", are there any thoughts on just going straight ahead to a Zeus? Always wanted a Terminus, and the QC seems nifty (gimmick or not). Although, I would lose the bolt-head change option that ARC CDG has.

kthomas · Oct 16, 2024

At its current price point, I still think the ARC CDG represents the best value proposition if you're willing to spend the money. It's an incredibly feature rich action, there's still lots of value there at its current price. It was an absolute steal at $899.

The Origin is a solid deal at ~$900. Zermatt Arms and the Origin is a very well known quantity. I think this is the obvious answer if you want to keep it around the $900 price range. You can save a bit more and go with a MacBros action, but you are making compromises to get to that price point.

For some reason I'm having a hard time getting excited about the Solus. I wouldn't pick it over the Origin at a similar price point, but that's just me.

FuhQ · Oct 16, 2024

I have 3 Solus setups, waiting on a 4th to ship… Are they as smooth as higher priced options? Not right out of the box, but after sometime and lots of cycles to break-in, it gets really slick. Mine shoot good, as long as they have a good tube on them.

Secant · Oct 16, 2024

Black Friday is coming up soon. I grabbed a Kelbly Prometheus for $920, shipped during 4th of July. If I were in your shoes, I’d wait a month and see what deals pop up.

kthomas · Oct 16, 2024

Secant said:
Black Friday is coming up soon. I grabbed a Kelbly Prometheus for $920, shipped during 4th of July. If I were in your shoes, I’d wait a month and see what deals pop up.

That's a hell of a deal...

DairyDictator · Oct 16, 2024

I'll be that guy.....

Entry level actions aren't the good deal their price tag suggests. If this is a temporary rifle or one you don't intend to shoot enough to burn out a barrel or two, then it might be worth it.

If you're putting a few thousand rounds a year on an action, Cortina said it best. Actions are basically free, barrels are cheap, ammo is expensive.

Secant · Oct 16, 2024

kthomas said:
That's a hell of a deal...

Haha. Yeah, also grabbed a TS Custom benchmark prefit for $450, and TT trigger for $110. Deals are out there for sure, and if the economy goes the way a lot of folks are thinking, there’s going to be more promos and deals on the horizon.

Emerson0311 · Oct 16, 2024

DairyDictator said:
I'll be that guy.....

Entry level actions aren't the good deal their price tag suggests. If this is a temporary rifle or one you don't intend to shoot enough to burn out a barrel or two, then it might be worth it.

If you're putting a few thousand rounds a year on an action, Cortina said it best. Actions are basically free, barrels are cheap, ammo is expensive.

Preach it brother!

Baron23 · Oct 16, 2024

Berkenen said:
Not to stray too far from the "entry" level price point, but if I would go up to the current price of a CDG, and we're all in agreement on "buy once cry once", are there any thoughts on just going straight ahead to a Zeus? Always wanted a Terminus, and the QC seems nifty (gimmick or not). Although, I would lose the bolt-head change option that ARC CDG has.

I've had dinner with Joel Russo twice in PA. He was really there to have dinner w Frank but I was a tag along. lol.

I have no personal experience w Terminus action but was very impressed w Mr Russo and I would certainly trust him for an action purchase.

Have spent a career in pretty high tech and have had to work with a lot of very strange but exceedingly brilliant engineers, so I also like Ted and think he’s a hoot.

That’s all I have to offer you.

Cheers

FuhQ · Oct 16, 2024

Baron23 said:
I e had dinner with Joel Russo twice in PA. He was really there to have dinner w Frank but I was a tag along. lol.

I have no personal experience w Terminus action but was very impressed w Mr Russo and I would certainly trust him for an action purchase.

Have spent a career in pretty high tech and having to work with a lot of very strange but exceedingly brilliant engineers, I also like Ted and think he’s a hoot.

That’s all I have to offer you.

Cheers

Joel is a standup dude. I knew him from way back in my LRH days starting back around 2008… Nice guy, hell of a stock builder, and Terminus are excellent actions.

jabonra · Oct 16, 2024

Origins can use savage take offs right? A 200 dollar beater 223/308/6.5 pipe is pretty enticing, does a starter rifle really need a custom fractional moa barrel?

spife7980 · Oct 16, 2024

jabonra said:
Origins can use savage take offs right? A 200 dollar beater 223/308/6.5 pipe is pretty enticing, does a starter rifle really need a custom fractional moa barrel?

It can.

Iits worth spending 500 on a pva or 400 on a criterion and getting a good one from the start.

TheBigCountry · Oct 16, 2024

diggler1833 said:
I still think that the Origin is one of the best 'lower cost' options.

This x 1000

Or check out the new Impact 707

Estes640 · Oct 17, 2024

I’ll echo what’s above ^^ origin or impact 707. I’m still waiting to pick up mine, as my ffl had to rush out of town, but he had good things to say about it when it arrived.

Cody S · Oct 17, 2024

Berkenen said:
Been out of the loop for a while after I sold my Curtis, and I know "search is my friend" but none of the starter/entry build threads were after the ARC CDG increased in price. If it was still the old price I would 100% get the CDG for $899, but now that it's almost the price of a TL3 does that change opinions on the go-to entry starter action?

Sounds like major contenders for this entry price point (R700 footprint) are still Origin, Solus, ARC Nucleus, any others I'm forgetting? Any thoughts?

my thoughts are 100% try to come up with the coin for a CDG, they are really fantastically designed.
also played with the origin, very nice actions.
with the Soulless not feeling smooth, just fire it a couple thousand times and wear out a cheap barrel. clean and lube every outing. after that any action out there should feel smooth as butter. I've got a savage b22 that, I did polish and run the piss out of it, but you'd laugh at how smooth it is all around.

Dirty D · Oct 17, 2024

I’m curious about the Weatherby 307 builders action but can’t find much info at all from end users. The Wby 307 builders action is a Rem 700 footprint and takes the same triggers

FuhQ · Oct 17, 2024

Dirty D said:
I’m curious about the Weatherby 307 builders action but can’t find much info at all from end users. The Wby 307 builders action is a Rem 700 footprint and takes the same triggers

Weatherby is a garbage company that doesn’t care about their customers, or stand behind their products after they’ve gotten your money.

Spend your money how you wish, and buy what floats your boat, just giving you a heads-up from my own personal experience with their CS department.

kthomas · Oct 17, 2024

TheBigCountry said:
This x 1000

Or check out the new Impact 707

BAT Igniter is also worth a look in the 707 and CDG price range.

Berkenen · Oct 17, 2024

kthomas said:
BAT Igniter is also worth a look in the 707 and CDG price range.

Stupid question from a noob, having a non integrated rails like the Igniter and the 707 worries me, seems like areas of possible failure and annoyance. Am I overblowing it?

kthomas · Oct 17, 2024

Berkenen said:
Stupid question from a noob, having a non integrated rails like the Igniter and the 707 worries me, seems like areas of possible failure and annoyance. Am I overblowing it?

Not a stupid question.

Yes, non-integral rails have the ability to come loose. There's ways to mitigate this, but an integrated rail isn't going to come loose, to your point.

Taylorbok · Oct 17, 2024

Berkenen said:
Stupid question from a noob, having a non integrated rails like the Igniter and the 707 worries me, seems like areas of possible failure and annoyance. Am I overblowing it?

those igniter rails are pinned, being pinned gives them very little chance to come loose. I wouldn't sweat it personally.
I actually like the changeable rails. Gives you the option to have different cant in the rails

Harman117 · Oct 17, 2024

Berkenen said:
Stupid question from a noob, having a non integrated rails like the Igniter and the 707 worries me, seems like areas of possible failure and annoyance. Am I overblowing it?

These "custom" actions that have a removable but pinned rail will likely never give an issue and shouldn't sway you away from them.

With the actions and rails being precisely made from the same company fit and finish will be tops. They typically also use oversized hardware AND hardened pins. If you use a mild, removable thread locker you'll be GTG.

Some prefer this setup over an integrated rail because of the ability to change cant and have an extended mounting surface (rail goes beyond the face of the action).

kthomas · Oct 17, 2024

I will say that I have a couple of actions with separate rails, and they haven't given me any issues.

One action did, an older Defiance Rebel. It wasn't pinned.

The people above make good points, if the rails have mitigations in place like pins, you should be GTG.

I would not be afraid to buy a 707 or Igniter on account of the rail not being integral.

Cody S · Oct 17, 2024

integral rails don't matter to me personally at all, but I really prefer integral recoil lugs.

Baron23 · Oct 17, 2024

I have a Seekins Havak action, not common in custom guns but Seekins makes top quality stuff. Scope rail is pinned and has…if I remember correctly, 5 screws.

It did come loose. Cleaned it up, lock-tited it, torqued to their recommendation (wanna say 18 in/lbs but not certain) and it’s been fine since.

But I like integral rail (and lug) as I know for a fact it own’t move.

FuhQ · Oct 17, 2024

Haters gonna hate, but most have zero personal experience with what they hate... They're just hating cause it's new and different and challenges their "normal" of what is known. Or, it's cheaper than their rig, and shoots just as good, and that pisses them off.

I try to remain open-minded, and put my own hard-earned money on the line to try one, and It does everything I need it to.

2800 FPS MV with a Berger 133 Elite from a 20" barrel, while still putting down 1/3 MOA groups... Yeah, I'm good with that.

image_cropper_5778DA93-270F-417B-8F4C-1F100B7DEC98-10219-00001A80781EB6BB.jpeg

FuhQ · Oct 17, 2024

Baron23 said:
I have a Seekins Havak action, not common in custom guns but Seekins makes top quality stuff. Scope rail is pinned and has…if I remember correctly, 5 screws.

It did come loose. Cleaned it up, lock-tited it, torqued to their recommendation (wanna say 18 in/lbs but not certain) and it’s been fine since.

But I like integral rail (and lug) as I know for a fact it own’t move.

If you don't want to use Loc-Tite, but want the screws to not back-out under recoil, Vibra-Tite a great option. And if you let it cure on the screws fully before reinstalling them, it will remain on there and functional, and you can remove and reinstall the screws a few times before having to reapply. I use it instead of thread-locker on my bases and then torque to the mfg. spec.

Berkenen · Oct 17, 2024

All good info, especially about the non-integrated rail, honestly I’m still pretty convinced to go with the “buy once cry once” crowd for an action and get a Terminus Zeus. I still have a barrel from my old Curtis Valor action I can use on it which would save some wait time.

Any opinions on a ARC CDG vs a Zeus? CDG still the wonder child?

clefairy · Oct 18, 2024

Berkenen said:
All good info, especially about the non-integrated rail, honestly I’m still pretty convinced to go with the “buy once cry once” crowd for an action and get a Terminus Zeus. I still have a barrel from my old Curtis Valor action I can use on it which would save some wait time.

Any opinions on a ARC CDG vs a Zeus? CDG still the wonder child?

I’ve had both. Zeus quick change barrel is nice, and I’m moving every few times a year so it’s nice not looking for a vice and barrel wrench every time I want a barrel change.

Arc is great if you want aw mags, if you shoot matches, you’ll lose more brass then any other action.

carbonbased · Oct 18, 2024

A mere $300 ($899 to $1199) is enough for you to reconsider the CDG?

$300 is ~2.5 boxes (50rds/box, or only 125rds total) of 6br Lapua Scenar-L 105gr ammo if you find a deal.

I shoot that in 3 range trips (sometimes two), and I don’t shoot that much compared to some around here.

So you sure you’re in the right hobby? Serious question.

I’d reread the below quote and really let it sink in

DairyDictator said:
If you're putting a few thousand rounds a year on an action, Cortina said it best. Actions are basically free, barrels are cheap, ammo is expensive.

Disclosure: I don’t own a CDG, don’t love or hate them. ARC makes great rings, however.

Ty21 · Oct 18, 2024

kthomas said:
At its current price point, I still think the ARC CDG represents the best value proposition if you're willing to spend the money. It's an incredibly feature rich action, there's still lots of value there at its current price. It was an absolute steal at $899.

The Origin is a solid deal at ~$900. Zermatt Arms and the Origin is a very well known quantity. I think this is the obvious answer if you want to keep it around the $900 price range. You can save a bit more and go with a MacBros action, but you are making compromises to get to that price point.

For some reason I'm having a hard time getting excited about the Solus. I wouldn't pick it over the Origin at a similar price point, but that's just me.

You miswell get a zues when I first started looking at custom actions. I wanted the zues. Ended up bye and origin building it, sold it got a tl3 built it, sold it….. finally purchased my zues qc and honestly should’ve just done it in the first place instead of trying to save money because in the end I ended up build 2 complete guns before get my zues.

Cody S · Oct 18, 2024

Berkenen said:
All good info, especially about the non-integrated rail, honestly I’m still pretty convinced to go with the “buy once cry once” crowd for an action and get a Terminus Zeus. I still have a barrel from my old Curtis Valor action I can use on it which would save some wait time.

Any opinions on a ARC CDG vs a Zeus? CDG still the wonder child?

not to brag but I'm in the tax bracket where I could have bought any action I wanted, including anything sako or AI.
I chose CDG and I have no regrets. in fact I'm so happy I'm about to order another one.
even if the CDG was 2k I'd still say it's the best designed action ever produced.

Hennig · Oct 18, 2024

FuhQ said:
Haters gonna hate, but most have zero personal experience with what they hate... They're just hating cause it's new and different and challenges their "normal" of what is known. Or, it's cheaper than their rig, and shoots just as good, and that pisses them off.

I try to remain open-minded, and put my own hard-earned money on the line to try one, and It does everything I need it to.

2800 FPS MV with a Berger 133 Elite from a 20" barrel, while still putting down 1/3 MOA groups... Yeah, I'm good with that.

View attachment 8526835 View attachment 8526836

I’m not 100% sure it falls under “open minded” to only preach about the Solus in every… single… thread.

I don’t think anyone is thinking the action will significantly affect accuracy. That’s the barrels job.

FuhQ · Oct 18, 2024

Hennig said:
I’m not 100% sure it falls under “open minded” to only preach about the Solus in every… single… thread.

I don’t think anyone is thinking the action will significantly affect accuracy. That’s the barrels job.

Well, when it gets mentioned in the OP by the OP first, who wants to know about them, it gets mentioned by someone with experience with them…You know, what Internet forums are for…

But please, continue to be a douche…We don’t have enough of those on here.

LuvDog · Oct 18, 2024

I have or had Lone Peak, Terminus, Zermatt, ARC, Defiance, Kelbly, Impact, Tikka, Ruger RPR and Rem.

They all have their pros and cons, and I agree at the intro price for the ARC, it was a no brainer.

With the new price it's still an amazing action and I think a better value than most of the others.

But if price is the most important factor, then I think I'd say the Origin would be the place to start. You give up a lot of "features" but you don't give up a great shooting and smooth action. I'd say my origin is just as smooth as my other actions, but it also has the most rounds on it.

If you want integral rail and lug and you're comparing the ARC CDG to a Zeus, Fuzion, TL3, Deviant/Ruckus, 737, Prometheus, then I'd say get the CDG because you also get a couple of other features and it's cheaper than most of the others.

I can't comment on the Solus since I've never seen or handled one though.

Oldrifle · Oct 18, 2024

Everyone will most likely tell you the solution. I've held one, and it's good, especially considering the price.
The Origin remains, in my opinion, one of the greatest choices.

Taylorbok · Oct 18, 2024

carbonbased said:
A mere $300 ($899 to $1199) is enough for you to reconsider the CDG?

$300 is ~2.5 boxes (50rds/box, or only 125rds total) of 6br Lapua Scenar-L 105gr ammo if you find a deal.

I shoot that in 3 range trips (sometimes two), and I don’t shoot that much compared to some around here.

So you sure you’re in the right hobby? Serious question.

I’d reread the below quote and really let it sink in

Disclosure: I don’t own a CDG, don’t love or hate them. ARC makes great rings, however.

I more look at it at 899 the CDG is a no brainer at 1199 it doesn't hurt to consider some other options. Seems like OP is heavily considering a Terminus Zeus instead.

carbonbased · Oct 18, 2024

Oldrifle said:
Everyone will most likely tell you the solution. I've held one, and it's good, especially considering the price.

You’ve held the solution? In your hands? Amazing. What’s a solution feel like?

lol ok giving you shit. I think you got autocorrected bro Solus —> solution.

spife7980 · Oct 18, 2024

carbonbased said:
You’ve held the solution? In your hands? Amazing. What’s a solution feel like?

Say... - General Boards Archive Forum - TigerNet

Terry Cross · Oct 18, 2024

Berkenen said:
Been out of the loop for a while after I sold my Curtis, and I know "search is my friend" but none of the starter/entry build threads were after the ARC CDG increased in price. If it was still the old price I would 100% get the CDG for $899, but now that it's almost the price of a TL3 does that change opinions on the go-to entry starter action?

Sounds like major contenders for this entry price point (R700 footprint) are still Origin, Solus, ARC Nucleus, any others I'm forgetting? Any thoughts?

Definitely worth looking at:

EVO II Stainless Steel DBM Short Action | Mack Brothers

The Mack Brothers EVO II Stainless Steel DBM Short Action starts from a 416 heat treated billet, and is CNC machined in only two operations eliminating

macbros.com

Cody S · Oct 20, 2024

that is pretty hot for 780

FearlessMagpie · Oct 21, 2024

Has anyone tried Ultimatum HMB?

Judd · Oct 21, 2024

The Solus has dual ejectors, that’s a deal killer for me. My experience, they pressure up faster and they solve a problem that doesn’t exist. It’s dumb and the engineer that added that to the design should be fired. My 2 cents…

I’m in the Origin is pretty hard to beat camp and especially at @Front Range Precision prices. Owen had (s) them on sale and at that price it’s even a bigger no brainier.

Good luck!

Having trouble using the site?

Subscribe to HideTV with code XMAS20 for 20% Off

Entry Level Build after CDG Price Bump

Private

Private

Private

Private

World's Okayest Rancher and Hog Hunter

Check 6

Sergeant of the Hide

Private

Sergeant

Unreconstructed

2.71828

Sergeant

Unlucky Bastard

2.71828

Old Salt

Check 6

Unreconstructed

Tactical conspicuous consumption

Luchador

Green Weenie

Sergeant of the Hide

Needmoor Creedmoor

Resident Sommelier of cellulite

Unreconstructed

Sergeant

Private

Sergeant

Private

Shooting Blanks

Sergeant

Needmoor Creedmoor

Check 6

Unreconstructed

Unreconstructed

Private

Sergeant of the Hide

💥💥💥💥

Sergeant of the Hide

Needmoor Creedmoor

Sergeant

Unreconstructed

Roof Korean

Private

Private

💥💥💥💥

Luchador

Dingleberry

Needmoor Creedmoor

Private

Sergeant

Similar threads