-
Having trouble using the site?
Contact support
Howa 1500 builds **post them**
- Thread starter stello1001
- Start date
Howa 1500 with an LRI fitted K&P 28" MTU Contour 1:8 Left Twist with an Ultrdyne Apollo LR brake sitting in a Woox Exactus precision stock using the Vortex Strike Eagle 5-25x56 in a 30 MOA American Defense mount sitting on a 25MOA rail.
www.snipershide.com
Howa 1500 7 PRC Build
Its going to be a blueprinted Howa 1500 with an LRI fitted K&P 28" MTU Contour 1:8 Left Twist with an Ultrdyne Apollo LR brake sitting in a Woox Exactus precision stock using the Vortex Strike Eagle 5-25x56 in a 30 MOA American Defense mount sitting on a 25MOA rail. Out of the box this was a...
www.snipershide.com
It's the Teir One Evolution Tactical.
I really wanted that style of bipod and it's about the only option.
Howa 1500 20" Heavy .308 SA from Brownells, got it with the Memorial Day discount out the door for $419 from my FFL after ePICS (PA NICS) fee.
Threw it in a MDT XSS-XL Gen 2 with a Talley picatinny rail, MDT 7 inch ARCA section, PRS Lite, B5 Systems T22 grip, and a SF3P waiting for my RC2-762 to be approved.
NF 7-35 F1 in a Reptilia 1.54 AUS mount with a diving board.
Was not expecting much for under $1100 all in minus the glass and mount I pulled off an M110A3. Shot 5rd groups under 0.75MOA at 100yd with Federal GMM 175s. The piece of shit MDT GRND bipod fell apart though, stripped screw inside, have an RMA opened up will get an accutac next time
Threw it in a MDT XSS-XL Gen 2 with a Talley picatinny rail, MDT 7 inch ARCA section, PRS Lite, B5 Systems T22 grip, and a SF3P waiting for my RC2-762 to be approved.
NF 7-35 F1 in a Reptilia 1.54 AUS mount with a diving board.
Was not expecting much for under $1100 all in minus the glass and mount I pulled off an M110A3. Shot 5rd groups under 0.75MOA at 100yd with Federal GMM 175s. The piece of shit MDT GRND bipod fell apart though, stripped screw inside, have an RMA opened up will get an accutac next time
Does anyone own this rifle or have any insight on it? I recently bought a MPA Matrix rifle 6.5 CM, but I won't see it for 16-18 weeks.
I still need to learn fundamentals and everything about shooting basically so I decided to buy a .22LR to practice with until my other rifle comes. This is the one I am considering. Also will I have any issues mounting a scope to this? I can't tell if the sights that come it are removable or not.
I still need to learn fundamentals and everything about shooting basically so I decided to buy a .22LR to practice with until my other rifle comes. This is the one I am considering. Also will I have any issues mounting a scope to this? I can't tell if the sights that come it are removable or not.
Howa TRAKR Rifle 22 LR - 18" - Black
The Howa TRAKR Rifle in 22 LR is engineered for precision and reliability, featuring a durable black finish that withstands wear and tear.
www.primaryarms.com
Probably a question best asked of Youtube.Does anyone own this rifle or have any insight on it? I recently bought a MPA Matrix rifle 6.5 CM, but I won't see it for 16-18 weeks.
I still need to learn fundamentals and everything about shooting basically so I decided to buy a .22LR to practice with until my other rifle comes. This is the one I am considering. Also will I have any issues mounting a scope to this? I can't tell if the sights that come it are removable or not.
Howa TRAKR Rifle 22 LR - 18" - Black
The Howa TRAKR Rifle in 22 LR is engineered for precision and reliability, featuring a durable black finish that withstands wear and tear.www.primaryarms.com
I figured this thread had the Howa experts. People on YouTube could be getting paid to say good things lol.
That's fair.
I typically watch a few different reviews if for no other reason but to get a general idea of what it is I'm looking at.
You might try asking for impressions/ review of that rifle in the Rimfire forum.
All Things Rimfire
Victor company .22 rimfire section, NRL 22 discussion, and rimfire talk.
www.snipershide.com
Does anyone own this rifle or have any insight on it? I recently bought a MPA Matrix rifle 6.5 CM, but I won't see it for 16-18 weeks.
I still need to learn fundamentals and everything about shooting basically so I decided to buy a .22LR to practice with until my other rifle comes. This is the one I am considering. Also will I have any issues mounting a scope to this? I can't tell if the sights that come it are removable or not.
Howa TRAKR Rifle 22 LR - 18" - Black
The Howa TRAKR Rifle in 22 LR is engineered for precision and reliability, featuring a durable black finish that withstands wear and tear.www.primaryarms.com
Oh wow, I actually didn't know this existed. Might make a decent beater 22.
Back in 2014, I bought an old Howa 1500 chambered in .308 off a buddy for $200; he'd won it in a local gun raffle. I finally decided it was time for some upgrades.
I swapped out the stock for a Stocky’s Stock VGA and drilled and tapped it for an SRS mini Arca rail. The original Nikon Monarch scope was replaced with a Leica Amplus 6, still SFP but now its capable of dialing for distance. I’m excited to see how it shoots when I hit the range next weekend.
I swapped out the stock for a Stocky’s Stock VGA and drilled and tapped it for an SRS mini Arca rail. The original Nikon Monarch scope was replaced with a Leica Amplus 6, still SFP but now its capable of dialing for distance. I’m excited to see how it shoots when I hit the range next weekend.
Anybody know a shop that has howa barrels with barrel nuts ready to go out the door?
Also, what action wrench and barrel vice do you guys recommend? My barrel just started shooting crappy and losing speed. It's shot out so now I'm looking.
Is Criterion going to be the only option right now?
Also, what action wrench and barrel vice do you guys recommend? My barrel just started shooting crappy and losing speed. It's shot out so now I'm looking.
Is Criterion going to be the only option right now?
For the same price as that barrel you could get a Howa rifle barreled action off brownells. At least until you can get your hands on the barrel you want.
I got a Short Action Customs action wrench and I got my barrel vice on amazon.
How's everyone cleaning their bolts?
I've had a few light primer strikes. Not surprised, I haven't cleaned the damn thing ever. I've got the bolt all stripped out. I was thinking of putting the bolt body and firing pin assembly in acetone for a bit to remove old grease. Then wipe with an old toothbrush, then re-oil with some hobo oil.
I've had a few light primer strikes. Not surprised, I haven't cleaned the damn thing ever. I've got the bolt all stripped out. I was thinking of putting the bolt body and firing pin assembly in acetone for a bit to remove old grease. Then wipe with an old toothbrush, then re-oil with some hobo oil.
Howa 1500 in 6.5 creedmoor
KRG Bravo Gen 2
Vortex Strike Eagle 5-25
Nightforce 20 MOA Rail
UTG Pro Rings
Ceraktoted Magpul FDE
KRG Bravo Gen 2
Vortex Strike Eagle 5-25
Nightforce 20 MOA Rail
UTG Pro Rings
Ceraktoted Magpul FDE
Attachments
Last edited:
Can anyone post any experience they may have had with the barreled actions from brownells? Mainly accuracy and any issues? Looking at the 300 Win Mag.
Had an older howa 300 win mag. It was a great rifle. Hand loaded for mine and it was tight grouping
No issues with mine. 308 heavy barrel in a B&C stock. Makes for a nice range toy.
Attachments
I’ve had two, one in 308 and the other 6.5 Creed. Both were sub minute rifles as long as I did my part.
I did the cutting the trigger spring coil on the HACT trigger mod and not really impressed. My HACT went from a fully functional 2 stage trigger to a stiff single stage.
Maybe he cut the wrong spring...I've done this on all five of my Howa Mini custom builds, as well as on a dozen or more full-size 1500 actions, and got very good results on all of them.
I did do something wrong. I cut off too many coils. Even after screwing the trigger adjustment screw all the way in to compensate, it's still not right.
I ordered the Gun Bloke spring kit. From what I understand, he's not very good about shipping orders from Australia timely. Now I got a jacked up trigger. My fault.
If anyone has a factory HACT actuator spring, I'm interested. That will hold me over through deer season.
Does anyone know if this barrel will fit in this stock? The barrel is listed as "medium ci tour" by Brownells. The B&C stocks come in standard or heavy barrel fit. The one below is standard, would assume the heavy contour stock is too large but not sure if the standard is too tight or not.
www.brownells.com
HOWA M1500 Barreled Action 300 Win Mag 24" BBL 1/2"-28 Blued SKU: 100053474 | Brownells
Check out HOWA M1500 Barreled Action 300 Win Mag 24" BBL 1/2"-28 Blued SKU: 100053474 | Brownells available Online at Brownells Today and many more Rifle Receivers & Parts products are available in our Gun Parts Department.
www.brownells.com
Does anyone know if this barrel will fit in this stock? The barrel is listed as "medium ci tour" by Brownells. The B&C stocks come in standard or heavy barrel fit. The one below is standard, would assume the heavy contour stock is too large but not sure if the standard is too tight or not.
HOWA M1500 Barreled Action 300 Win Mag 24" BBL 1/2"-28 Blued SKU: 100053474 | Brownells
Check out HOWA M1500 Barreled Action 300 Win Mag 24" BBL 1/2"-28 Blued SKU: 100053474 | Brownells available Online at Brownells Today and many more Rifle Receivers & Parts products are available in our Gun Parts Department.
I would go with the stock channel for the heavy contour for the benefit of more room and free float with the medium contour.
Sorry here is the link for the stock i meant to include
If it was me, I’d error on having excess channel between stock and barrel vs too little.
Would i still be able to get away without having to bed this set up? I have the howa heavy barrel in 308 in one of the B&C stocks cut for heavy barrels. Not bedded. Required a little adjusting to get the barrel to line up relatively even in the channel, but now shoots super accurate.
In my experience with the Howa 1500 in a chassis, the key to getting the barrel centered in the channel is to tighten each action screw one turn, then check for centering, then repeat until at the required torque.
-Stan
Answering the question you didn’t ask…
My Howa in my MDT ACC Premier without bedding out shoots me. It did the same when it previously rode in an Accurate Mag chassis.
My theory is that since Howa is a unique square-style action that nobody else makes, tolerances on Howa-sized chassis can be tighter than on chassis built for 700-style actions, as 700-style chassis must be made to fit a wide variety of manufacturers and their tolerances or lack thereof.
YMMV.
-Stan
Find an m8 (or whatever thread pattern they use) stud or bolt and cut the head part off. It should be long enough to stick all the way down below the stock and have enough threads to still get a washer and nut on your bottom metal.
With said stud on the action, you will fill the recoil lug area with lots of compound because the stud will push some out so make sure to put enough. Then drop it in. You're gonna use a nut to kinda just help securely so don't tighten it too much. Just by hand is enough.
Even with the stud in place and filling the area in the action for the action screw hole, still put release agent all in there and on the stud.
Winchester and Ruger have entered the discussion...
I've had good results pillar bedding my Ruger M-77 receivers, and they have the added complication of the angled forward action screw. I first bed the pillars to the action and stock, then bed the recoil lug in a second separate step. I epoxy bedded my Howa's recoil lug into my stock's aluminum bedding block as it didn't show full contact across the rear face of the lug, so that was a very simple process. Bedding a Howa into a more conventional wood or composite stock shouldn't present any unusual problems, just be sure to bed only the bottom of the receiver and the rear-facing surface of the recoil lug as you would with any other action.
Oh and by the way, you bed the entire area of the recoil lug. You don't need to tape anything off on the recoil lug as its angled shape allows it to come out with ease. They are designed to allow for complete bedding around them.
Thank you for identifying my area of ignorance.Winchester and Ruger have entered the discussion...
View attachment 8552430
I've had good results pillar bedding my Ruger M-77 receivers, and they have the added complication of the angled forward action screw. I first bed the pillars to the action and stock, then bed the recoil lug in a second separate step. I epoxy bedded my Howa's recoil lug into my stock's aluminum bedding block as it didn't show full contact across the rear face of the lug, so that was a very simple process. Bedding a Howa into a more conventional wood or composite stock shouldn't present any unusual problems, just be sure to bed only the bottom of the receiver and the rear-facing surface of the recoil lug as you would with any other action.
I assume that Ruger only fits Ruger inlets, Winchester only Winchester, Howa only Howa etc?
I.e. none of the square actions are interchangeable across platforms as the R700s from multiple manufacturers are?
-Stan
Correct. Perhaps your point revolves around the fact that only Howa makes a Howa-1500 pattern receiver?
My thought revolves around lots of companies with various levels of talent make R700-style receivers and stock and chassis manufacturers have to leave enough room in their products to reasonably to fit them all.
If a stock or chassis manufacturer is making a product to fit a Howa, Ruger, or Winchester, shouldn’t the stock or chassis manufacturer be able to make their stock or chassis tolerances tighter since they are only worrying about fitting one manufacturer’s product?
-Stan
O.K., I see your point. You would think that's the case as Howa appears to manufacture their receivers to tighter tolerances than Remington alone ever has, not even considering all the 700 clone-makers. It's very doubtful that any stock or chassis fitment issues are the fault of Howa.
I'd expect no less than bedding. In my experience it really sucks to open up a barrel channel in a stock, I've done that a few times, never a B&C though!
I'm a little mystified with Brownells listing a 30 cal bbl for the 300 Win Mag with 1/2-28 threads...?? Is it a misprint, or does Howa really thread a 30 cal bbl for a 22 cal suppressor?
I've used Bell & Carlson stocks for several Howa bbl'd actions that came with the heavy/varmint contour bbls, but not in that specific stock. Stocks I've used with the heavy bbls are: 2093,1013, 6550, 6560, & 2998. If the bbl doesn't center in the stock's bbl channel after you've snugged the action screws, take a close look at the rear tang & how it fits into the inletting. If it's bearing on one side more than the other, that will usually be the cause of the bbl not being centered. Cutting a bit of relief in the side that's bearing on the tang will center things up; you just need to wrap enough tape around the bbl at about the mid point in the bbl channel before bedding so that it will center the bbl when the bbl'd action is put into the stock, and use enough bedding compound to fill the gap you cut at the tang area.
I've used Bell & Carlson stocks for several Howa bbl'd actions that came with the heavy/varmint contour bbls, but not in that specific stock. Stocks I've used with the heavy bbls are: 2093,1013, 6550, 6560, & 2998. If the bbl doesn't center in the stock's bbl channel after you've snugged the action screws, take a close look at the rear tang & how it fits into the inletting. If it's bearing on one side more than the other, that will usually be the cause of the bbl not being centered. Cutting a bit of relief in the side that's bearing on the tang will center things up; you just need to wrap enough tape around the bbl at about the mid point in the bbl channel before bedding so that it will center the bbl when the bbl'd action is put into the stock, and use enough bedding compound to fill the gap you cut at the tang area.
