Accuracy International Picture Thread

clubmanager · Dec 19, 2024

Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....

Accessories - Accuracy International AICS Magazines

Have four short, 5 round magazines and three tall, 10 round magazines. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. $155 shipped for two (whatever combo you want) $145 $75 for each additional magazine. $70

www.snipershide.com

hafejd30 · Dec 19, 2024

clubmanager said:
Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....

Accessories - Accuracy International AICS Magazines

Have four short, 5 round magazines and three tall, 10 round magazines. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. $155 shipped for two (whatever combo you want) $145 $75 for each additional magazine. $70

www.snipershide.com

Accuracy International AT-X/AX Magazines

Accuracy International Rifle Magazines for sale for the AT-X and AX rifles. A.I. Magazines, Doublestack, .308, in multiple colors, and more from Mile High Shooting.

www.milehighshooting.com

clubmanager · Dec 19, 2024

Thanks. I'll just buy them online at the stores. No sense rolling the dice anyway!

xxflyingturtlexx · Dec 19, 2024

HKSniper11B said:
I'll gladly take your AX Buttstock off your hands if you do.

This was definitely the case, even with my MIL credentials on file at MHS and my wanting an AT-LE. Or even an AXSA that, for whatever reason, the model being a MIL/LEO exclusive only through them.

Promise i will hit you up first if i go through with this and decide to sell it!!!

xxflyingturtlexx · Dec 19, 2024

VSP968 said:
These two weigh a little over 2 pounds.

View attachment 8571966

View attachment 8571967

Bro reached out from 1976

xxflyingturtlexx · Dec 19, 2024

Man looks like AT-LE has some following. I might be interested in a straight up trade with a long action

rbutcher · Dec 21, 2024

It’s for sure great to shoot and get behind, but the non thumbhole is a serious knock against it

carbonbased · Dec 21, 2024

clubmanager said:
Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....

Accessories - Accuracy International AICS Magazines

Have four short, 5 round magazines and three tall, 10 round magazines. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. $155 shipped for two (whatever combo you want) $145 $75 for each additional magazine. $70

www.snipershide.com

If memory serves, regular AW mags work fine in an AX. The special AX mags pop in a little more securely. They have a little catch bumped out on the front, making them unusable in an AT unless you cut and pound the catch flush.

Source: me. I used to own both.

You could always check this thread too:

AW/AE/AICS mag diffrences

This should be the last post about the diffrences between AI mags. 1st is a full view of .308 and .338 rifles. Take note at the diffrence in thickness in the mag well area: Close up of the .308's: Close up of the .338's: In each of the following mags there are 3 rounds loaded. These...

www.snipershide.com

carbonbased · Dec 21, 2024

xxflyingturtlexx said:
Bro reached out from 1976

IKR? I remember those things from my youth.

But given my experience with the digital variety, I wish I had one of those older mechanical scales.

Nik H · Dec 21, 2024

So I have tried a lot of thumb rest contraptions for my AXMC. The ones I have tried all have compromises. Some interfere with the folding stock locking.

I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.

Here it is on my MC

It is really amazing. It was about $95 total, including shipping from London that cost $35.

Criver600 · Dec 22, 2024

Nik H said:
So I have tried a lot of thumb rest contraptions for my AXMC. The ones I have tried all have compromises. Some interfere with the folding stock locking.

I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.

Here it is on my MC

View attachment 8574732

It is really amazing. It was about $95 total, including shipping from London that cost $35.

Mike makes good stuff, I'm running MBE bag riders & sleds on all three of my AT-X's

DDGKunia · Dec 22, 2024

Nik H said:
So I have tried a lot of thumb rest contraptions for my AXMC. The ones I have tried all have compromises. Some interfere with the folding stock locking.

I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.

Here it is on my MC

View attachment 8574732

It is really amazing. It was about $95 total, including shipping from London that cost $35.

Can someone get him to make one for axsr? It blows my mind no one has came up with a good one yet.

Nik H · Dec 22, 2024

DDGKunia said:
Can someone get him to make one for axsr? It blows my mind no one has came up with a good one yet.

Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

DDGKunia · Dec 22, 2024

Nik H said:
Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

Yes. Different lower, stock etc. Completely different.
Only thing shared is barrels and magazines to my knowledge.

xxflyingturtlexx · Dec 22, 2024

Hennig said:
View attachment 8572661

i have both, disagree

Tex68w · Dec 22, 2024

xxflyingturtlexx said:
i have both, disagree

Ehh, I don't see either as better than the other, they just have different strengths and weaknesses. I have both and if I had to keep just one it'd likely be the Razor but I am glad that I don't have to make that decision.

TheOE800 · Dec 22, 2024

Nik H said:
Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

There are no mounting points. Someone around here drilled and tapped theirs for XLR’s thumb rest.

Huskydriver · Dec 22, 2024

Nik H said:
Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?

Completely

HD1911 · Dec 22, 2024

Nik H · Dec 22, 2024

TheOE800 said:
There are no mounting points. Someone around here drilled and tapped theirs for XLR’s thumb rest.

Fuck that

Tritiumdials · Dec 22, 2024

Nik H said:
Fuck that

Relax, it's just a gun.

TheOE800 · Dec 22, 2024

Nik H said:
Fuck that

Yeah I’m a bought not built kinda gal.

Nik H · Dec 22, 2024

Tritiumdials said:
Relax, it's just a gun.View attachment 8575259

Totally relaxed

jbuck88 · Dec 22, 2024

Tex68w said:
Ehh, I don't see either as better than the other, they just have different strengths and weaknesses. I have both and if I had to keep just one it'd likely be the Razor but I am glad that I don't have to make that decision.

The ATACR is easier for me to get behind. Have the G3 on the AT-X and ATACR on the AXSR.

Tex68w · Dec 22, 2024

jbuck88 said:
The ATACR is easier for me to get behind. Have the G3 on the AT-X and ATACR on the AXSR.

I am only referring to the ATACR 1-8x vs Razor 1-10x. But I will agree with you, the ATACR is a touch easier to get behind.

thrashergrant · Dec 23, 2024

Posted this over on the ATXC thread but these Green Meanies have relevance here too.

Really cool to shoot these back to back. The AW is an '07 in .308 and the ATXC is a '24 in 6.5cm...at least 17 years of technological advancement between these two examples.

stanley_white · Dec 23, 2024

I discovered that the Limbsaver Recoil Pad Grind To Fit Black Small (1″ Thick/LOP) 10541, if installed upside down, fits on my AI AT, and if left unground offers a softer and wider recoil pad than factory.

See pics below.

-Stan

SpeedDrop · Dec 24, 2024

Dialing it in with the 6.5 CM barrel before switching to 300 PRC.

rbutcher · Dec 25, 2024

SpeedDrop said:
Dialing it in with the 6.5 CM barrel before switching to 300 PRC.

View attachment 8576314

What RMR ring cap on the ultramount?

Huskydriver · Dec 25, 2024

stanley_white said:
I discovered that the Limbsaver Recoil Pad Grind To Fit Black Small (1″ Thick/LOP) 10541, if installed upside down, fits on my AI AT, and if left unground offers a softer and wider recoil pad than factory.

See pics below.

-Stan

View attachment 8575766

View attachment 8575767

View attachment 8575768

That 6gt recoil be hard huh?

stanley_white · Dec 26, 2024

Huskydriver said:
That 6gt recoil be hard huh?

Less about recoil with my 308 and more about increasing the surface area of the recoil pad permits a better rifle to shoulder connection which makes everything seem more steady, especially in the prone.

-Stan

diggler1833 · Dec 26, 2024

stanley_white said:
Less about recoil with my 308 and more about increasing the surface area of the recoil pad permits a better rifle to shoulder connection which makes everything seem more steady, especially in the prone.

-Stan

See...all you have to do is turn your recoil pad upside-down. That's what the pros (with little deltoids) do man...

Shots fired...

stanley_white · Dec 26, 2024

diggler1833 said:
See...all you have to do is turn your recoil pad upside-down. That's what the pros (with little deltoids) do man...

Shots fired...

I turned my new recoil pad upside down.

-Stan

diggler1833 · Dec 26, 2024

stanley_white said:
I turned my new recoil pad upside down.

-Stan

Well just know Sir, that when the site figures out how to 'un-gay' itself and its picture posting issue...that I have a meme for you...

Tex68w · Dec 26, 2024

Gay or not it does work better.

WillHugh · Dec 26, 2024

Anyone shooting 6 Dasher with the new Gray Ops magazines? I'm having a terrible time getting rounds to feed in my AT-X. Have tried the mag catch at a few different heights. Seems like the brass shoulder is ramming into the receiver locking lugs.

hafejd30 · Dec 26, 2024

WillHugh said:
Anyone shooting 6 Dasher with the new Gray Ops magazines? I'm having a terrible time getting rounds to feed in my AT-X. Have tried the mag catch at a few different heights. Seems like the brass shoulder is ramming into the receiver locking lugs.

Have you tried the updated mags? They changed the follower to address some issues with 6mm rounds

Vivacious Stallion · Dec 26, 2024

@WillHugh do you have a picture of how the case is hanging up? I'm running the greyops 6gt mag in my ATX chassis. The issues I had were related to the bullet tip catching on the feedram area of the magwell. I did have to mess with the catch position a bit.

WillHugh · Dec 27, 2024

Vivacious Stallion said:
@WillHugh do you have a picture of how the case is hanging up? I'm running the greyops 6gt mag in my ATX chassis. The issues I had were related to the bullet tip catching on the feedram area of the magwell. I did have to mess with the catch position a bit.

Having trouble posting pictures right now. I think that may be my issue though. The rounds are coming out of the magazine, but not making it very far. What position did you find worked best for you?

Hennig · Dec 27, 2024

xxflyingturtlexx said:
i have both, disagree

That’s ok, you can.

I don’t have any ATACRs left in the safe at this point *shrug*

diggler1833 · Dec 27, 2024

hafejd30 said:
Have you tried the updated mags? They changed the follower to address some issues with 6mm rounds

I have, and unfortunately I still get stovepipes (nose down) with my 6GT in my AT-X.

The only work-around that I've found at this point is to load the rounds forward...even with the back of the feed lips. Feeds great then, but I doubt that would work well if I were running around in a PRS match and slamming my rifle off of stuff (getting rounds to shift in the magazine).

Roadrace33 · Dec 27, 2024

Bit heavy for coyote hunting but definitely do-able.

Vivacious Stallion · Dec 27, 2024

WillHugh said:
Having trouble posting pictures right now. I think that may be my issue though. The rounds are coming out of the magazine, but not making it very far. What position did you find worked best for you?

My mag needs to be pretty tight against the bottom of the action when locked in. No vertical slop like I can get away with on my other mags.

Chasing3 · Dec 27, 2024

AXMC, 308 barrel cut to 16.5 along with handguard. Edit, pictures still won’t attach.

jbuck88 · Dec 27, 2024

Roadrace33 said:
Bit heavy for coyote hunting but definitely do-able.

Compared to our tiny coyotes that looks more like the size of a wolf

xxflyingturtlexx · Dec 28, 2024

Would anyone join if there was an AI owners discord channel? Gauging interest.

Huskydriver · Dec 28, 2024

xxflyingturtlexx said:
Would anyone join if there was an AI owners discord channel? Gauging interest.

Oh your not currently on it? That's awkward

Tex68w · Dec 28, 2024

There's a group on reddit and it's super slow.

TheBigCountry · Dec 28, 2024

Huskydriver said:
Oh your not currently on it? That's awkward

wtf is a discord

HKSniper11B · Dec 28, 2024

I'm going to put this out there, decided to jump the gun as I was talking to @xxflyingturtlexx about it after SH crashed. And, real-time conversation would be nice. Click the link below to get started:

Click Here: Accuracy International Fan Club Discord Server

Discord is similar to the old IRC days (Internet Relay Chat). Think of it as a server dedicated to a specific topic, that has channels and categories. In this case, the server would be about Accuracy International rifles, and we can do all the same things as we do here on SH in this AI channel, but more. It will take the community to grow it.

It requires downloading the "Discord" application (remember AOL Instant Messenger? Sort of like that, but more). The link above gets you started. And if we can get this big enough, it'd be worth asking for blessings & support from Accuracy International.

Having trouble using the site?

Accuracy International Picture Thread

Private

Supporter

Private

Meme smuggler!

Meme smuggler!

Meme smuggler!

Supporter

💥💥💥💥

💥💥💥💥

Constantly Learning

Sergeant

Sergeant of the Hide

Constantly Learning

Sergeant of the Hide

Meme smuggler!

Mister Bevilaqua

Argumentative

Not here for a long time but here for a good time

Full Member

Constantly Learning

Gunny Sergeant

Argumentative

Constantly Learning

Full Member

Mister Bevilaqua

Supporter

If it ain’t broke, you can’t resist.

Supporter

Supporter

Not here for a long time but here for a good time

If it ain’t broke, you can’t resist.

World's Okayest Rancher and Hog Hunter

If it ain’t broke, you can’t resist.

World's Okayest Rancher and Hog Hunter

Mister Bevilaqua

Private

Supporter

Public Health Authority for the Shadow Gov

Private

Sergeant

World's Okayest Rancher and Hog Hunter

Private

Public Health Authority for the Shadow Gov

Major Hide Member

Full Member

Meme smuggler!

Not here for a long time but here for a good time

Mister Bevilaqua

Green Weenie

H&K PRS Enthusiast

Similar threads