Just epoxy, you can see it gooping out from under the button.
Lets see your USMC M40-M40A6!!!
- Thread starter callsignninja
- Start date
Figured I’d share the 40 family photo now that they are all done. Left to right
Big hook A3 w/ Unertl
T&E A3 w/ 8541
Marsoc A3 w/ MVP rail and SB 4-16
MIRS A3 w/ mil spec NF 3-15
Tranny A3 w/ PGW and 8541
A5 w/ 8541a
A6 w/ 8541a but soon to be 8541 glass
Big hook A3 w/ Unertl
T&E A3 w/ 8541
Marsoc A3 w/ MVP rail and SB 4-16
MIRS A3 w/ mil spec NF 3-15
Tranny A3 w/ PGW and 8541
A5 w/ 8541a
A6 w/ 8541a but soon to be 8541 glass
Starting to move rifles into the Remington display case.
A lot of money and time. And she may be fugly for the purests but she is a beauty to me!
It's refreshing to see such a unique left-handed M40A1 style build, thank you for posting it! Even though it's obviously not clone correct, it's still a very unique and respectful build that captures the spirit of the M40A1 while making it useful for lefties. I like this a lot, it's good to change things up at times and just have fun with a build.
Thank you! I tried to have it as clone correct as possible with the exception of being left handed. It was definitely a fun project! Although the scope and mount were a pain. The scope mount is from TBA. Seems to be holding up just fine.
What are these from? Maybe m40a3?? I have several sets of low serial numbered usmc issued rings with simrad caps that came with unertl cmp auction scopes. The rings and simrads were pulled off and the scopes were the used on m40a1 builds. The simads and rings were all painted up and I don't want to go scraping looking for numbers. Thanks
Hey folks, not too sure where to ask this. But i have an idea for a clone-ish build. An M40A5 but in 300wm. Would the surefire muzzle break handle 300wm?? I don’t see why not, but before spending money i figure id ask.
Thanks!
Thanks!
I have one MB762SS on a .300 Ultra Mag and another MB762SS on a 7mm Remington Mag, firing a SureFire FA762SS on each. No issues to date.
That said… PRIOR TO FIRING, I would strongly recommend mounting your Suppressor on each and every rifle you plan to use it on and checking for proper alignment with an appropriately sized alignment rod to identify potential baffle strike before the fact.
That said… PRIOR TO FIRING, I would strongly recommend mounting your Suppressor on each and every rifle you plan to use it on and checking for proper alignment with an appropriately sized alignment rod to identify potential baffle strike before the fact.
Similar threads
