16-18 inch shorty rifles
- Thread starter DrDeath
- Start date
I decided to build a 22 Creedmoor before it gets uncool to have one. Barrel was bought on sale from J&A Outdoors and chambered by Black Canyon Customs. So far it’s been a straight hammer with Hornady Precision Hunter 80gr ELD-X factory ammo.
Kelbly Prometheus action
McGowen 18” carbon barrel
Manners LRH-NV
MDT bottom metal
NF NXS 3.5-15x50 ffp
TT Special 2-stage
TBAC Ultra 7
Planning to add a clip-on eventually.
Kelbly Prometheus action
McGowen 18” carbon barrel
Manners LRH-NV
MDT bottom metal
NF NXS 3.5-15x50 ffp
TT Special 2-stage
TBAC Ultra 7
Planning to add a clip-on eventually.
Attachments
This old ESS is perfect for my newish 223 build. Was impressed with the accuracy at 600 in some crazy winds and rain this past weekend. So fun and cheap to shoot.
I’m an idiot…. The barrel is actually 18”. I went back and forth on whether to cut it 18” or 20” and wasn’t thinking when I posted.. I edited it. Thanks for calling me out! I guess I’ve had to many crayons this evening!
This style stock and 16”-18” barrel is the most ascetically pleasing setups. With lower profile scope like an US Optics x17 or x10, Mark 4 or 6 would be
What barrel length and what loads are you running?
Rifle looks cool AF.
Thanks man, it’s an 18” Bartlein M24 contour that SPR spun up for me. It’s heavy at 18 pounds but it feels like a 22 recoil wise. I have used a little Varget, 2230-C, Benchmark, N140, and 748 but settled on StaBALL Match for the convenience of ball and consistency of stick powder.
Running both the 75 and 80 ELDM’s with 26.0 grains at 2.500” OAL. The 80’s are running just over 2800 fps. I got the 75’s up to an average of 2960 using 26.0 grains of Win 748 but the SD’s were really high. Using Starline 5.56 brass and Rem 7 1/2 primers.
Running both the 75 and 80 ELDM’s with 26.0 grains at 2.500” OAL. The 80’s are running just over 2800 fps. I got the 75’s up to an average of 2960 using 26.0 grains of Win 748 but the SD’s were really high. Using Starline 5.56 brass and Rem 7 1/2 primers.
Ill post some pics of mine when I get back to the house, I prefer 14-18" barrels on 308/6.5CM. My range for those rifles are typically always under 400 though.
Origin
PVA Osprey .223 Wylde prefit, .750 Taperless 1-7" at 18"
Stocky's VG2
Hawkins Hunter DBM
Been fun so far.
PVA Osprey .223 Wylde prefit, .750 Taperless 1-7" at 18"
Stocky's VG2
Hawkins Hunter DBM
Been fun so far.
I thought that barrel looked like a thick boi.
That seems pretty fast for an 18" barrel, my Tikka was really slow with Varget, ended up with Benchmark and 73gr ELDs.
Yeah I have read that Varget is a bit slower in a 223 than some other good powders so that’s probably most of it. Is your Tikka barrel factory? I am at 2755 with Varget with the 75’s and 2721 with the 80 ELDMS. Not sure how close that is to your velocities.
Sounds like the StaBall Match isn't as close to Varget as I thought it was.
My Varget loads with 75gr BTHPs were barely breaking 2600fps whereas I ended up using Benchmark and am getting 2750ps with 75gr BTHPs and 2780fps with 73gr ELD-Ms.
Factory Tikka barrel which does appear to be slow from other loads I've tested.
Got it out and zeroed for some coyote hunting. 55gr hornady varmint shot this today in some wind. Pleased so far.
Anyone tried a short barrel 6 CM? Just wondering if there would be any issues as opposed to a 6.5CM?
I will have one eventually. I got an 18” carbon fiber barrel blank but will be looking for a 16” in the near future.
I have a 16” 243, so similar. Shooting light bullets for coyote hunting and it’s been awesome. I was shooting 58gr vmaxes at about 3300 and have since switched to 65gr Noslers. I haven’t even cronoed them but longest kill was 300 yards with my thermal.
Thanks. I had a 24” 6 creed and shot 108 eldm. Not sure how that would do.
What twist barrel are you using?
