Search results

Search the forum Search Articles
  1. S

    tracers and other fun rounds,

    Re: tracers and other fun rounds, what is fun with the green tip? It'll mess up steel targets and probably wear out your barrel faster...
  2. S

    .308 Win Subsonic

    Re: .308 Win Subsonic I think you might struggle with 208gr Amax, they are pretty long arent they? If i were you, i would try the 220gr Sierra Pro Hunter. It is as short as possible with that weight (RNSP). I shoot it in my .30-06 1-10" and 20" barrel with great success! Allthough people said...
  3. S

    DIY kydex cheak rest

    Re: DIY kydex cheak rest it hardens very fast, just 10 sec and its hard. I used a hot air gun, and i put som thick papers between the kydex and my stock so i wouldnt heat it too much. Just make a mark on the middle of the plate so you know where to bend it. I just heated, bended and held it...
  4. S

    Rifle Scopes 300 blk (AAC blackou) Laser diode?

    Re: 300 blk (AAC blackou) Laser diode? Im not sure, because you cut the brass and set it back abit. If you already have on, test it. Why would you need a laser to sight it in? Just make a solid rest, and look through the barrel, and you'll be pretty straight on. Im usually about 10cm away...
  5. S

    Gunsmithing Who makes custom muzzlebrakes?

    Re: Who makes custom muzzlebrakes? you can probably just ask any guy with a lathe to make it for you. I made this in about an hour, and its really effective... This took a little longer, and is not as pleasant to use, because it kicks up alot of dust.
  6. S

    DIY kydex cheak rest

    Re: DIY kydex cheak rest I bought my stuff from http://www.knifekits.com/vcom/index.php
  7. S

    DIY kydex cheak rest

    Re: DIY kydex cheak rest
  8. S

    Rifle Scopes leupold mark 6 3-18

    Re: leupold mark 6 3-18 and how is it possible to take 400 dollars for a f*n reticle? The Horus pricing has bugged me a long time...
  9. S

    Rifle Scopes Steel Base and Rings Needed for Aluminum Tube?

    Re: Steel Base and Rings Needed for Aluminum Tube? Do you take it on and off alot? What kind of caliber? I prefer steel mounts, because the weight difference is minimal and they are stronger.
  10. S

    Rifle Scopes Protecting my scope from the rings...?

    Re: Protecting my scope from the rings...? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 19Scout77</div><div class="ubbcode-body">Your post begs the question...Why the $60 rings with the $3000 scope? The cost and time you spent lapping them would have been more...
  11. S

    Rifle Scopes Protecting my scope from the rings...?

    Re: Protecting my scope from the rings...? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: coach482</div><div class="ubbcode-body">Good presentation. What are you using for the bar stock and are you buying it the right outer diameter, or turning it down? I don't...
  12. S

    Rifle Scopes Protecting my scope from the rings...?

    Re: Protecting my scope from the rings...? Lapping the rings will both make a more solid mount and protect your scope. How i did it: Lapped my TPS 34mm steel rings by making a bolt to the same diameter as my PM2 (33,8mm). Then i mounted the scope rings to my rail and tightened them good. I...
  13. S

    Rifle Scopes Horus Vision Users

    Re: Horus Vision Users Waking this to life. I was looking to buy a Leupold Mark 4 spotting scope, and the best reticle imo is the H32. But the price difference between the normal reticles, like MLR and mildot and Horus is 700 dollars! It 41% MORE than the exact same scope with another...
  14. S

    W-3 Chassis: Rem 700 *Updated with Folder info*

    Re: WHISKEY-3 Chassis for the Remington 700 Also i wondered if the next generation will have platic covered front, both because scratches wont be as visible and the fact that aluminium transfers heat about 6 times more efficient than steel. That is getting pretty cold in the winter. It might...
  15. S

    Rifle Scopes S&B 3-20x50 Pic Thread

    Re: S&B 3-20x50 Pic Thread Blaser R93 caliber 6,5x55 (and 30-06), 20 MOA steel rail, TPS steel rings (low), A tec Maxim silencer, Versa-Pod, homemade cheekrest, versa-pod adapter and boltknob. Had the scope for about 20 days now, 2 trips to the range. Love it!
  16. S

    W-3 Chassis: Rem 700 *Updated with Folder info*

    Re: WHISKEY-3 Chassis for the Remington 700 is the hole in the front for mounting this: Atlas mount for TRG...
  17. S

    Rifle Scopes delete please

    Re: TPS super-low rings: 700 w/50mm PST and EGW 20moa the interesting dimension is from bottom of the scope to top of the rail, like this: then you can measure the distance between your scope and barrel, and between the scope and rail (this might be limitin for some scopes, at least for...
  18. S

    Which bipod? Does it really matter?

    Re: Which bipod? Does it really matter? The durability of the Harris is better than my Versa-Pod, but i like the versapod better. You can mount it higher up with a pin and it will not roll when you give it a slight push forwards. The harris will roll forwards on the range if you have the...
  19. S

    Leupold QRW Rings

    Re: Leupold QRW Rings I like them alot, both the design and the price. They have a tendency to rotate the scope when you tighten the screws the first time, and im 100% sure they will return to zero. As stated above, you have to push the scope forwards while tighening it to the rail, so it...
  20. S

    Boot's, What are you guys wearing?

    Re: Boot's, What are you guys wearing? Lundhags Syncro High. Sweedish handmade boots, tough as hell, and gives a lot of support in rough terrain with heavy loads. No gore-tex, so they require some love to keep you dry, but will last for ages. or when its light terrain and no heavy backpack...
Top Bottom
Back
Home
Forums
Merch
Alerts