Search results

Search the forum Search Articles
  1. BearNaked

    BIDENS STABILIZER BAN

    Honestly, if they remove the $200 tax then I might as well SBR it. I am already on the registry for my suppressor and everyone elses list because of my CHL. so what am I losing by getting the SBR stamp? I don't travel outside of Texas and if I do, I will take something else not on the list...
  2. BearNaked

    Annealeez Aluminum Wheels

    Annealeaz. the others werent out when i bought mine. it was annealeaz or DIY it yourself. i think they had some of the high-end ones out but too much for me. i was using a drill socket and torch when starting out.
  3. BearNaked

    Annealeez Aluminum Wheels

    I have one of the early ones. no digital gauge, regulator, special arm, or any of that. mine runs great for 223, 6.5 Grendel, and 260 Remington. I point the flame away from the body/wheels, so they don't melt. I haven't had the issue of the flame having to be adjusted either. set it and go...
  4. BearNaked

    Reloading bench surface

    I used a weathered stain then sanded it down to give it more of a weathered look. then just used this to seal it. had it on a couple of benches and it works great.
  5. BearNaked

    Powder IN-STOCK thread

    great to hear. thank you
  6. BearNaked

    Powder IN-STOCK thread

    this site pulls up on scam reports. anybody purchased from them?
  7. BearNaked

    OCW question

    As others stated, depends on your barrel thickness and ambient temp. heavy barrels i usually run between 7-10 shots before a break and my AR's i run about 5. Maybe 1-2 mins between shots. I write down speeds, notes if i pulled it, check brass, etc to waste the boring wait time between shots...
  8. BearNaked

    Riding the bench

    I just finished mine about a month ago. its 9' long x 24" deep x 48" tall (im 6'4" so its perfect elbow height while standing) I built it using 1/2" sande plywood, the top is 3/4" (looking back i should have done a butcher block top for the stiffness, the 3/4" plywood has some flex across the 3'...
  9. BearNaked

    Pressure signs?

    like others said, primers are not reliable pressure signs but those still have rounded edges and no bolt swipe. good to go. i would go more off of bolt lift feel and swipe.
  10. BearNaked

    .260 Remington

    I neck down 308 brass to 260. i do have to turn necks so they chamber. (these are once fired military brass) Honestly, unless you love spending hours on brass prep, I wouldn't bother with it and just buy some 260 brass. I do enjoy the process so i continue to do it but understand it is a process...
  11. BearNaked

    Recce type scopes?

    I was hoping for someone to show their AR with a 7" barrel and a 6-24 scope (with a full sunshade so it sticks out past the barrel), call it their Recce build and watch the heads explode. thank yall for the laughs. truly didnt disappoint.
  12. BearNaked

    Neck turning tips

    I turn necks because after sizing 308 brass to 260 rem, the necks are too thick to fit my chamber to fire form and there is a donut on the shoulder so neck turning fixes these issues. otherwise, I wouldnt do it. Only reason i am still necking down brass is because i got over 2000 cases of 308...
  13. BearNaked

    primers in stock

    I've been using Ammoseek.com to find primers. havent purchased any, damn bank account said no, but they have reviews on the site of people that used it. obviously do your research but maybe it will help.
  14. BearNaked

    Best value chronograph

    yes and no. mine will pick up the rounds (high sensitivity) but the speed is very sporadic and not trustworthy. wish I saved for the bigger version so it would fit on the suppressor. I run the same setup/suppressor
  15. BearNaked

    Do Cold Bores Count On Groups?

    Just curious if yall think cold bores count on groups? Either way, I am very pleased with this grouping. Here is the measurement with my cold bore shot. 5 shots total. here it is without the cold bore shot. 4 shots...
    • Thread
  16. BearNaked

    RCBS Chargemaster Drain Spout Broke

    Their customer service guy told me there was nothing they could do about it. they don't make any replacement parts for the drain spout itself since there wasn't a way to install one or take one off without destroying it. I just super glued it for now so we will see how long that holds up.
  17. BearNaked

    RCBS Chargemaster Drain Spout Broke

    Coming to yall for advise on a quick repair for Drain Spout cap on the side of an RCBS chargemaster. the other night after I loaded up some rounds, I went to dump out the powder and when I turned the drain spout cap to open it, the damn thing split in half. The only thing I can think of is a...
  18. BearNaked

    Vibe tumbler media options

    I do about 50/50 walnut and corn cob mix with a brass cleaner that goes in the media. it works great for about 10-15 cycles but then needs to get replaced or it will start to get really dusty.
  19. BearNaked

    Gunsmithing Aluminum Barrel Blocks

    i got a few old belts laying around. I may try that.
  20. BearNaked

    Gunsmithing Aluminum Barrel Blocks

    I have some older Aluminum barrel blocks and these do not grip anything. What do yall use or would you use to help make these blocks grip the barrel better? I was thinking of spraying them with Plastidip but didn't know if that would hold up to the pressure once it is in the vice. I have used...
Top Bottom
Back
Home
Forums
Merch
Alerts