Search results

Search the forum Search Articles
  1. M

    Crooked HS Precision stocks?

    I recently purchased a HS Precision M24 stock. I installed the stock and put my bipod on it. I was checking the level on my scope and noticed it needed to be rotated. After looking at the rifle it appears that the rifle is leaning to the left. I got to looking at the stock and it seems it...
  2. M

    Gunsmithing painting firearms

    Re: painting firearms I would go with just the Alumahyde. If you plan on coating more guns in the future just get a cheap HVLP gun and use duracoat. Its pretty easy to apply and is durable. The key to any of the coatings from paint to cerakote is prep. Make sure you degrease thoroughly...
  3. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock Did you have him inlet it for you? Did you see how close it was out of the box?
  4. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock I may do some tactical matches. I am looking for a detachable magazine.
  5. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock I just purchased a HS Precision M24 A1. I was looking for some suggestions on bottom metal. I thougt about the HS Prescision bottom metal but I haven't heard anything about them.
  6. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock The price looks better on the HS Precision! I guess you get what you pay for. I like the HS Precision M24 anyone have one?
  7. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock Thanks Engine22 I will check one out. Its good to hear that you have the same gun in that stock and you really like it. Did you have it bedded or have to do much fitting?
  8. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock Any recommendations on the best stock for the money?
  9. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock Looks like we have a comedian on our hands!
  10. M

    Gunsmithing Bedding a sps with hogue stock

    Re: Bedding a sps with hogue stock Thanks for the input.
  11. M

    Gunsmithing Bedding a sps with hogue stock

    I was wondering if anyone has bedded a Remington 700 sps with the rubber hogue stock. I am thinking of getting one of the DIY kits and trying my luck at it or just getting another stock and having it professionally bedded. Just wanting some opinions.
  12. M

    Reloading 101: Reloading basics for the new reload

    Re: Reloading 101: Reloading basics for the new reload Thanks for the info. This is the most informative site on the internet for anything gun related.
  13. M

    Reloading 101: Reloading basics for the new reload

    Re: Reloading 101: Reloading basics for the new reload They only have 1 hole.
  14. M

    Reloading 101: Reloading basics for the new reload

    Re: Reloading 101: Reloading basics for the new reload How do you remove the crimp?
  15. M

    Reloading 101: Reloading basics for the new reload

    Re: Reloading 101: Reloading basics for the new reload I'm new at reloading and was wondering if anyone has loaded any 5.56mm brass that has LC 09 on the back with a small circle with 4 dots in it. I have heard that the primers are not pressed in and maybe they can't be reloaded. Any...
  16. M

    Gunsmithing Need to refinish a S.S. 1911 frame to black

    Re: Need to refinish a S.S. 1911 frame to black You could use dura coat if your going to do it yourself. I just did my 1911 all matte black and it turned out great.
  17. M

    Gunsmithing Material for a oven

    Re: Material for a oven I have an old electric smoker that I use. It will go from 100-250 degrees. So far I have had good luck with it and you can find some used ones for around a hundred bucks. Works great for pistols and you can get most rifles in the one I have.
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts