Search results

Search the forum Search Articles
  1. H

    IMR 8208 XBR

    Re: IMR 8208 XBR 155 AMAX 44.7 IMR 8208 XBR Lapua prepped Rem700 PSS 26" PMC primer 2.840" 100 yard ocw initial tests. Feeling the flyer was me, I missed a wind call in difficult conditions. Slightly over .5 CTC.
  2. H

    OCW gurus, Help Needed...

    Re: OCW gurus, Help Needed... <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">What is the listed max for this load with 8208 and how close are you to it with 30g? </div></div> I am well above book max with this. If you try these work-up. Hodgdon...
  3. H

    OCW gurus, Help Needed...

    Re: OCW gurus, Help Needed... Yes, I have this posted there for a while. Just got a response from Dan himself. He also agrees with the nodes. I was just thinking the same thing about the jam as well. I will play with both areas, and see what comes out of it. Thanks for all the replies.
  4. H

    OCW gurus, Help Needed...

    Re: OCW gurus, Help Needed... <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">30.3 grains of Varget CCI450 105 Berger VLD just touching the lands</div></div> What neck tension are you using for these?
  5. H

    OCW gurus, Help Needed...

    Re: OCW gurus, Help Needed... What are you folks feelings on this powder?
  6. H

    OCW gurus, Help Needed...

    Re: OCW gurus, Help Needed... Thanks for the replies. <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Shoot another set with 29.4, 29.6, and 29.8 grains. </div></div> Looks like and area of interest. I will work on it there. <div...
  7. H

    OCW gurus, Help Needed...

    Been trying to wrap my head around this method for load workup. I am limited to a 100 yard range for development, and this seems like the method that will work best at this range. So, can anyone tell me if I am doing this right?? Components I used were: Rifle is a Savage target action...
  8. H

    My Rem 700SA in 6SuperX

    Re: My Rem 700SA in 6SuperX <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Is there an increase in barrel life over the .243? </div></div> With the longer neck and 30 degree shoulder, theory says it should increase barrel life. But this is a...
  9. H

    My Rem 700SA in 6SuperX

    Re: My Rem 700SA in 6SuperX <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I am running 3166fps with my 6x47L using 40gr of RL17, CCI450 and 107SMK. Barrel is a Broughton and length is 26". SD of 13,not great but groups are sub .5. Load shoots...
  10. H

    My Rem 700SA in 6SuperX

    Re: My Rem 700SA in 6SuperX Would a 6X47L run in the same ballpark, pushing 105-108's, while burning less powder? Or would 6superlr have an edge? I mean if you will run them 3050, then the 6x47L can do that, but if there is an accuracy edge at 3100-3200 with out bullet failure, then the...
  11. H

    My Rem 700SA in 6SuperX

    Re: My Rem 700SA in 6SuperX <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I'm able to run 105's or 107's to 3150 to 3200 depending on the powder and primer and be consistent with 1/2 minute groupings with mine.</div></div> Wow, looks like at...
  12. H

    My Rem 700SA in 6SuperX

    Re: My Rem 700SA in 6SuperX I was also thinking of getting this chamber. With a 1:8 barrel you must intend to shoot 105-108's. I'd like to see where the accuracy node is at with those weight bullets. In Roberts article, he says he runs 115 right near 2900 to 3k fps. If 105-108s can go...
  13. H

    My Rem 700SA in 6SuperX

    Re: My Rem 700SA in 6SuperX I am interested in this cartridge. What kind of accuracy and velocity are you getting?
  14. H

    Loads for 6mmbr(heavies 105-115gr)

    Didn't see a 6mmbr topic in the depot yet. I'd like to see what you guys use. My best load so far. Savage Target Action T&T by SSS SSS LTV stock, glass bedded. 24" Mcgowen Bull taper 1:8 twist Lapua Brass about .002 neck tension Wolf small rifle magnum primers 107 SMK's OAL of 2.330" .015"...
  15. H

    Savage swich barrel

    Re: Savage swich barrel I put a Mcgowen in 6mmbr on my Target Action. First group with a load pulled out of my arse. http://www.mcgowenbarrel.com/catalog4.htm Still working loads, but this barrel is a hummer.
  16. H

    My 6BR

    Re: My 6BR Mine likes Varget as well. What kind of loads and velocity are you getting?
  17. H

    Rather unusual 6 BR request

    Re: Rather unusual 6 BR request I have a Savage Target Action with a Mcgowen 24" barrel. Mine likes 30.7 Varget .015 jump to the lands. OAL of 2.330. Still doing load workups, but these shoot in the .3xx" at a hundred consistent. I think my freebore is shorter than a factory Savage. YMMV...
  18. H

    My "Ultimate" Long Range AR - 6mm Super LR

    Re: My "Ultimate" Long Range AR Very nice! I can't wait to see what that'll do at 1K. What kind of barrel life is expected out of the 6mmsuperlr?
  19. H

    Rifle Scopes Sightron 20x42 mmd fixed power any reviews?

    Re: Sightron 20x42 mmd fixed power any reviews? Last update.. I took the Sightron SIII 20x42 fixed power out yesterday to a practice match and got to shoot at 200, 500, 600 yards. I can say that I was impressed by this little scope. I did not get a chance to rezero after mounting the scope...
  20. H

    Rifle Scopes Sightron 20x42 mmd fixed power any reviews?

    Re: Sightron 20x42 mmd fixed power any reviews? Well here we go. I took my new Siii 20x42 out this weekend and shot it side by side with my brother's mkiv leupold. With the leupold set at 20x the siii was just slightly darker but seemed to be just as crisp. It was kind of hard to get the...
Top Bottom
Back
Home
Forums
Merch
Alerts