bullets

  1. jrhtx

    Source for good hard cast plated 9mm & 45 bullets?

    Anyone have a recommendation and source for good plated hard cast bullets? 9mm (124 gr) and 45 (200 or 230 gr) for practice? Thanks James
    • jrhtx
    • Thread
    • 9mm bullets cast good hard plated source
    • Replies: 2
    • Forum: Reloading Depot
  2. G

    M1 Garand and AP bullets

    I have come upon a good supply of pulled .30 AP bullets from LC 53 ammo. I am wondering if anybody has any load data on these bullets loaded into new commercial brass. I understand that the stuff was suppose to be loaded with WC 852 powder I believe and the M1 Ball used IMR 4895 I'd like to get...
  3. BLAWTON

    Rocky Mountain Bullets.

    We have decided on a weight. The BC on these bullet are looking like they will be close to or right a 1. These will be aluminum tipped bullets. We went out and did some testing today and shot a few sub moa groups at 1k and i was very happy about how they were peforming. If all goes well should...
  4. M

    338Lapua Magnum - Barnes Bullets

    Hi everyone, I'm looking at trying 225grn TTSX from Barnes as a hunting load. My local dealer advised me to load the projectiles at least 50 Thou off the lands. While this gets the length of the cartridge down to a length that will fit in the magazine, I'm concerned that a jump that...
  5. C

    Black Spots On New Berger Bullets

    I opened a case today and to my surprise they are spotted with black, any ideal why?
  6. chpprguy

    Gunsmithing cast lead bullets in a semi-auto

    This question may seem stupid, but I am unsure and searched with no luck. I have a lot of 230 RNFP cast bullits I usually shoot in a 45LC SAA replica. Can I load these in 45ACP and shoot them in a Semi-auto? Namely an XD 45 tactical.... Mostly for plinking and staying proficient with the...
  7. J

    Rebated Boat Tail Bullets

    It seems to me that most match bullets are BT bullets. However, I've noticed that some Lapua bullets are rebated BT. There was a resent thread about making your own match bullets and the company that makes the dies for the bullets seems to only offer rebated BT dies for their match bullets...
  8. Shadow_Warrior

    Any suppliers have .338 Lapua 300gr bullets

    Any suppliers have .338 Lapua 300gr bullets in stock?
  9. H

    The Garand, heavy bullets, and slow powders: Quest

    I am building up a Garand, 30-06, to shoot the 208 A-max and slow powders. Krieger is doing the barrel and I will be using a McCann gas system. My question is this: Does anyone know how big the gas port is for the 30-06 based rifles? We are going to install the next to lowest orifice size for...
  10. K

    Dimpled Bullets

    Interesting article on dimpled bullets on the 6mmBR Dailey Bulletin. Anyone know long these will stay in the prototype stage, and when they’ll be available from Berger? Seems they pick up 80 fps in .308 and close to 150fps in .338 caliber.
  11. R

    Bullets for Stock Rem 700 Varmit in .243?

    I have a Rem 700 SPS Varmit (1 x 9 1/8 twist) in .243 on order. I'm gathering up the bullets for load development. Right now I have 105 Amax and 105 Berger. I will be using Rel 17, CCIBR and Lapua cases. Will be picking up Rem or Win cases for lost brass matches. I will use it for...
  12. C

    204 long distance bullets

    I am looking at reloading some 204 for my JP Rifles upper and want to find a recipe for ranges out to 500-600 yards. Any ideas.
  13. M

    Thoughts on 155gr Lapua Scenar .308 bullets

    How do these bullets rank in terms of accuracy? Is there an appreciable difference between moly coated and uncoated?
  14. M

    Norma 200 gr HPBT Bullets

    These any good? Will be shooting them out of a 26in, 1 in 10 twist 300WM. Shot the 210smk's great but found a good price on these(Or what I think is a good price). About $19.00 per hundred. Thanks for any input. Jeremy
  15. Grump

    Load Interchangeability of .308 155-gr Bullets?

    I'm finding a lot of firsthand reports on 155-gr Lapuas and the occasional A-Max, and I've just finished up a box of Nosler 155s and have access to some Berger 155.5s.... Except for the A-Max, anyone see differences in safe max loads between the various 155s? With both 4064 and IMR 4895, my...
    • Grump
    • Thread
    • 155gr 308 bullets interchangeability load
    • Replies: 10
    • Forum: Reloading Depot
  16. A

    Feed Ramp marking bullets

    It seems my AICS mag causes my bullets to slam into the feeding ramp and scrape up the ramp and leave copper jacket bits behind on the ramp. With help from a separate thread I was able to adjust my AICS 5rd mag to not scrape the feed ramp as much. However, after extracting the bullet (carefully)...
  17. D

    250 scenars bullets from Powder valley?

    Anyone here has recently received shipment of the 250 scenar bullets from Powder Valley? Was told that it should be avail. in late January. Thanks for your help.
  18. N

    shilen bullets

    does anyone have any experiance with the shilen 52gr. .22 benchrest bullets.are they worth the extra money.
  19. dreamdrummr

    Berger bullets....

    Does anyone know who has the best price on berger bullets?
  20. kraigWY

    H335 & pulled 173 mil bullets

    Here's the deal, like everyone else, I'm in a hurt when it comes to finding primers, powder and bullets for high power. I'm setting on about 3000 pieces of pulled 173s from my NG days, and about 20#s of H335, and several thousand pieces of LC mixed brass. I'm thinking of 45 grn to push the...
Top Bottom
Back
Home
Forums
Merch
Alerts