die

  1. G

    Redding Competition Seating Die worth it for....

    Do you guys think this die is worth using for semi-auto (AR15). Should I just stick to the standard seating die? I'm loading for a SPR MK12 Mod0.
  2. T

    Lee neck die for .308

    I've had good results from the Lee Collet neck sizer die with my .22-250 I'd like to try one for the .308 (Rem700PSS) but it seems everyone is out of stock Your experience with this die in a .308 and a source for the die (rather not buy the deluxe 2 and 3 die sets) would be much appreciated TBC
  3. diggler1833

    RCBS .223 die issues, any input?

    While I was loading some 68gr Hornady BTHPs yesterday I noticed that every bullet had an indentation ring on the ogive about 1/3 of the way from the meplat. Did I do something wrong with setting up the die? I did set up the die like the instructions said with turning it all the way down on an...
  4. skinney_7

    bullet die

    i shoot 175gr SMK wondering if anyone has used a whidden die system or meplat trimmer, one or the other or both, and the accuracy difference from 400 to 1000mtrs.
  5. jayjaytuner

    redding FL bushing die

    the redding full length bushing dies i belive there type S... can the expander ball be taken out of them? thanks for the help jay
  6. C

    Using a FL Die to Neck Size

    I have heard and read several opinions on this topic, I would like to get some input from members who have done this, would also like to know if it is a recommended procedure, or should I just buy a Neck Sizer die for the rifle. I will only be firing the brass in 1 rifle. Remington 700P 300WM...
  7. D

    RCBS Die Set

    i am going to get a RCBS die set in 308. I am wondering if i need to get any other dies in addition to those or will those two be sufficent enough to at least get me on the right path and making some rounds? TIA also does anyone have a hand priming tool that they want to part ways with if so...
  8. S

    6.5CM neck sizing die??

    IS there a neck sizing die for the 6.5 creedmoor? I cant find one. I have the hornady die set but it doesnt list or show just a neck die. My rifle is shooting really well with full length sizing, but i just wonder how much better it would shoot with just sizing the necks. Anyone know anything i...
  9. Emilio

    Reloading die blanks

    I just bought a PALMA 95 reamer that I am going to have used on a barrel blank. I would like my smith to use the same reamer for makeing some custom dies for my rifle. Can anyone tell me where I can find some die blanks?
  10. Slickrick0999

    forster comp seater die question?

    My forster seating die is leaving a ring around my 178 Amax bullets. Why is it doing this and how do I correct? I dont remember seeing this with the 175 SMK's. I have already taken it apart to clean. Nothing to bad on that. I load some more and the ring is still there. Thanks, Rick
  11. Mag 300

    7 WSM on Dillon 550 Xtra large powder die needed

    Do you need an extra large powder die to reload the 7 WSM on a 550? Thanks I will call them tomarrow just wondering Bill
  12. B

    Getting back into reloading: Die recommendation

    Getting back into reloading after 10 years for my new Savage 10FCP 308. Been looking at Forster with the Ultra seater die. Trying to find a good neck die. What do you guys recommend? Not trying to start a brawl over dies.
  13. R

    Expander ball on a neck sizing die?

    I noticed that my Redding neck sizing die came with the expander ball on the decapping rod. Do you guys run the ball through after neck sizing? Seems counter productive to me. Especially when using a sized neck bushing. But, on the flip side I can see how it would provide more consistent...
  14. jacq220

    seating die trouble

    Okay, first batch of 5 rounds just to get a feel for things... got to the RCBS competition bullet seater in .308 cal... using 155 scenars i cannot get the die set up to seat the bullet deep enough... its running around 2.950 at the moment and i need to get it down to around 2.800... why is this...
  15. padronanniversary

    Neil Jones custom die or thrower?

    Anyone here have any experience with the neil jones custom die or throwers ? I've been reading up on them, and was curious about if its worth it or not. Thanks in advance
  16. Jedi

    Lee collet die??

    How good is it?? Heard tell utilizing this eliminates need for neck turning as mandrel ensures even thickness thru out neck? Concept here is avoid neck turning Two step neck size Collet first to even out neck thickness and initial reduction then follow with redding bushin die to ensure correct...
  17. strick9

    7mm saum die deal.

    Just an fyi. http://www.cabelas.com/cabelas/en/templa...&hasJS=true
  18. T

    Best Die Set to buy for 308 reloading???

    Is this the set to buy from Midsouth.. REDDING RELOADING PRODUCTS 308 WINCHESTER COMPETITION BUSHING NECK DIE SET
  19. Opiy

    Reddings new case resizing die G-Rx

    Check this out. From the article is seems only 40 s&w is the only caliber but if they release one for 9mm I am sure I will get one. The die resizes the full length of the brass to take out the bulge of fired brass. Redding G-Rx Die
  20. B

    RCBS Gold Medal Match Series Bushing N/S Die

    Anyone got experience in using this die and what's the benefits compared to a regular NS die (not from the advertisement but from the real life as a reloader )
Top Bottom
Back
Home
Forums
Merch
Alerts