load

  1. junglejim23

    load data for M61 projo's with IMR 4895?

    any one have any load worked up for M61 projo's using IMR 4895 ?? I have weighed a few and they range from 150-153 grains. just wondering if any of you have had any good luck
  2. W

    .223 load recommendations for H335 in Bushmaster

    I am going to load for a Prairie Dog extermination trip in 3 weeks & want re-use my once fired brass, mostly Hornady, some BHA. I'm going to use 50g Vmax bullets, CCI BR4 primers ( or Fed 205M). In the past Hornady factory ammo w 50g Vmaxes has shot amazing groups from my 24" Bushmaster...
  3. zscurlock

    .50 cal press? Load? Trimming?

    Which do you prefer? The only one I can get right now is the Hornady. I am also wondering what do about trimming? I have a giraud for all other calibers. Does bmg brass grow and need to be trimmed every firing? I have 200 pieces of primed brass and wanted to get started. Will I have to size it...
  4. C

    Load help???

    So I just started to reload I have some IMR4895 and some Sierra matchking 168 Grain BTHP's and some sierra matchking 155 grain BTHP Palma match bullets with some federal brass and some federal 210 primers and also some CCI magnum primers... any recommended load??? all the books I have have...
  5. G

    New load for a short barrel 308

    Hey Guys Im building a 21" 308 using a model 700 varment, was a 26" barrel, I'm looking for a good starter load, bullet, powder, primer? I dont have it finished yet but should be by the end of the month. Most of my shooting will be at 500 yards target and 100-300 hunting. I was told that varget...
  6. M

    308 load, rem700 5r mil spec, tumbling

    Hi everyone, this is my first post on this board. I went to the range today, second trip with this rifle. I was shooting 175smks, Varget, CCI BR, fed brass. Started at 40.0, tumbled. Moved to 42.0, tumbled. Then 43.0, in LC brass, tumbled. I then tried factory gmm 168gr, and that even...
  7. Edgewater

    in need of a load for a socom 16

    first, I know this is not the most accurate rifle to begin with. I have tried to improve the accuracy by mounting it in a troy mcs. What I have to work with is smk 168g, imr4895 and win. nato brass and cci no. 34 primers. Looking for something reasonably accurate. Help is greatly appreciated.
  8. Mag 300

    Need a good load for M1A 168 gr projectile?

    does anyone have a good semi auto load for the M1A I have a M-21 and have been using 44 gr of rl15 and a 168 some poeple here say that this could damage the rifle ?? Thanks in advance Bill
  9. forrest2906

    .308 can and load question

    I have a new can that just arrived ( proswat ) and was wondering if anyone else had one like this. I curently have it on a DPMS lr308 (tac20 model) and was going to work on some reduced loads for it. I live in an area where this would work well for coyotes and such. I also have a 700PSS that...
  10. 19Scout77

    7wsm 162 Amax, 4831SC Max Load

    I am trying to hit some real velocity with a 22.5" barrelled 7wsm. So far with 64 gns of 4831sc under a 162 Amax, I have reached a consistent 2835, without pressure--and great accuracy. I want to juice it up a bit more and I'm curious as to what others have found to be a max pressure load using...
  11. E

    .308, 168 gr match load recipe

    Does anyone have a pet/standard .308 load recipe that you'd care to give me. I'm just trying to avoid buying a whole reloading book just to get one load. Looking for 308 with 168 and 175 grian bullets. Thank you.
  12. P

    General accuracy load question

    I realize this is a very general question, but. The load manuals always show a wide range of charge weights. Are the loads usually more accurate in the middle of the range shown, near max, or is evrry single barrel that different. I need to work a load up. I have some SMK Palma 155gr bullets...
  13. P

    Load workup?

    I finally had a chance to load up a few rounds and try out my new rifle. I have 2 different bullets for now with more coming. I have an old box of Sierra MatchKing Palma 155gr bullets and a box of Sierra GameKing 165gr bullets. Looking through my Hornady book I decided on a charge of 45gr for...
  14. 9

    Will my load be OK to 1,000?

    I'm going to shoot in a 1,000 yard F-class match in two weeks (my 1st match). In the last two weeks I've developed a load that works well in my "factory" Remington SPS at 200 yards (175gr SMK w/ 43.4 gr of Varget in Lake City brass with WLR primers). Until George and the gang ships me my new...
  15. ykrvak

    Range Report When will I need to change my load?

    I've got a 7mmRM with a 26" and am thinking of cutting it down. I currently reload for this rifle with 65gr of RL22 behind 168gr VLDs. I'm thinking of cutting back to 20" and putting a can on it. Will I still be ok, or will I need to switch to a faster burning powder? I just don't want to end up...
  16. BgBmBoo

    WOO HOO..think I found my .223 load (pics)

    Well....the wind was much calmer today so I took a bunch of my latest reloads out and shot Five, 5 shot groups at 100yrds. I am pretty happy with them. Not going to change anything at this time. Here is what I ended up: Black Hills "red box" fired brass FL sized (I have two AR's and like to...
  17. Jimmy2Times

    What to do when the load your rifle loves sucks?

    Ok, so here's the problem. My current load is SMK 175 gr. HPBT, 43.4 gr. IMR 4064, CCI BR2 Primer, all in a Federal Case. This is running around 2600 FPS and will get me out to 1000 yards which is my absolute finite distance requirement. The problem is it doesn't group extremely well out of my...
  18. U

    load for 75 gr. .223

    Looking for some advice/starting point for a hunting load in my AR I want to shoot the 75 gr. Swift Scirroco bullets in my AR for southern Whitetails......I know that i need to stick to factory seating depths for the mags but that's about all i know. My rig is a custom upper, 20" walther 1-8...
  19. T

    Need a load for a Remington Milspec 5R .308

    OK, I just bought a new Remington 700 Milspec 5R and I'm ready to load up some ammo and see what it'll do. It's been forever since I've made any .308 loads and could use a little help on some starting componants. Looking around it would seem everybody is out of components, but I've got Federal...
  20. 03psd

    .22-250 load suggestion

    give me your most accurate .22-250 load suggestions for a 1:14 M700 VSF. I have the following components on hand: Win Brass R&P Brass IMR4064 Varget H380 H414 Nosler 50gr Spitzer Nosler 52gr Ballistic Tip Nosler 52gr BTHP Hornady 52gr BTHP CCI Large Rifle Primers Federal 210 Primers
Top Bottom
Back
Home
Forums
Merch
Alerts