load

  1. CaliShooter

    load development

    When chronographing for .308 ncrements are your powdercharges from one group to the next. 1/2 grain? 2/10ths of grain?
  2. Ishallbie O'Cullkillin

    Tackdriving AR10 Load at Max.

    Ok, Ok, It's only 1/2 MOA, but this is my AR10A4 with stock chrome lined 20" barrel, free floated. 45gr Varget, 168 Amax, Fed brass, WLR primer, oal 2.81" @ 2610fps. I am waiting for the 90F weather to test for excessive pressure, but want to know if this load is going to beat my rifle up...
  3. S

    Good .308 Ball load

    I have a bunch of surplus .308 brass and 147gr bullets I'd like to use for a decent ball load. What spherical powder will give me good results? This ammo will be for a scoped FAL. I'd like it to be able to maintain "minute of man" to about 500-600 yards. I'll be using WLR primers.
  4. BgBmBoo

    Load info for fast twist .243...anyone??

    Hi gang. Looking for load recommendations for a 1:7.5 twist .243 Win. barrel. This seems REALLY fast to me. My current .243 has a 1:10 barrel. Thanks,Stan
  5. B

    Rifle Scopes NF Benchrest 12-42x56mm for Load Development & BR

    Hey Guys! I was thinking of getting a 'really' high-powered scope (35+) for doing load development and possibly some benchrest competition in the future (still need a BR rifle), and was looking at the NighForce 12-42x56mm Benchrest model. It looks like a nice range of magnification and while I...
  6. A

    Copycat load of Hornady .223 REM 75gr. BTHP Match

    Bought a few boxes of these for $12.95 from CMP last fall and my stash is rapidly dwindling with my recent purchase of a Savage 12 BVSS 26" barreled .223 Rem. This rifle really likes them, shooting 1/2 MOA regularly. I tried some of my homegrown, but load development can be hit and miss and so...
  7. jrhtx

    Starting Load for a Short M1A/M14 ??

    Anyone have a starting load for a M1A / M14? 13.5" barrel 147 gr FMJ LC mil brass, powder? 748? CCI primers (what I have and can still find a few) Thanks James
  8. averageshooter

    load data for mk12 mod1?

    Hey guys I am having Centurion Arms build me a mk12 mod 1 upper. I was wondering what you guys recommend for starting to build loads. Looking for a load for 600 or so. Figure I will probably just get winchester brass but would like a combination to start working off. Does anyone have the...
  9. T

    I need load data for 80 grain amaxes in 223

    Preferably Varget. Any help would be appreciated as I do not have a Hornady reloading manual. These will be fireforming loads for a 223 AI, 1 in 7.5 twist, 22 inch barrel. Thanks Eddie
  10. S

    Suggested load for DPMS SASS?

    I have a DPMS SASS with an 18 in. barrel. I have put almost every conceivable factory load through it and there is no question that it likes 168 gr BTHP the best. FGMM groups around 1 inch and Winchester Supreme is a close second. If I go with a lighter or heavier bullet the groups expand out...
  11. dj70

    Std .308 M1A Load BLC-2 147grn fmjbt Winchester

    .308 62 deg - elevation 1220' - no crono. distance 109 paces, damn close to 109 yds. peep sights, front sand bag rest, rear bag with cross arm adjustment. Brass, LC Match, fl sized w/ sb dies, CCI 34 primers, OAL 2.8" 47.5 gr shot the best with a vertical spread on about 2.5" and a 1.5" width...
    • dj70
    • Thread
    • 147grn 308 blc2 fmjbt load m1a std winchester
    • Replies: 0
    • Forum: Reloading Depot
  12. twwilson25

    New to Reloading and need a starter load for 7mm

    Hey guys, I just bought a RCBS reloading starter kit and want to start loading. I have help from a experienced reloader but need a starter load. Here is what I have so far for my 7mm Rem mag. Reloader 25 Hornady 162 Amax Berger 180's waiting on cci primers Does anyone have any starter load...
  13. R

    Anybody find a smoking load for DPMS .308?

    Out of all of the factory stuff I've tried, Black Hills, 168 grain did the best, producing sub 2" groups at 200 yards, which was better than Federal 168. The best handload I've come up with so far is Lapua 155 grain Scenars, with 46 grains of Varget, which will do 1/2" out of my bolt gun at 200...
  14. JasonB

    Anyone load their "percision" ammo on a 650XL?

    I was thinking about getting an 650XL to do my 6.8spc and 308 ammo for my gas guns... question though does anyone use one for there Bolt guns? How accurate/consistant is the powder dump? I figure if I keep using my Redding Bushing Dies like I do with my Single Stage as long as my powder drop is...
  15. T

    243AI load info please

    I currently have an FN SPR action at my smith and he is building me a 243ai 3 groove 8 twist 28" barrel to shoot the 105 class bullets. I am looking for peoples pet loads with velocities. I have not picked a specific bullet that I want I just know I want at least 100gr and yes I know to start...
  16. banshee sws

    308 load with 185 lapua???

    i got 1000 of these and need a starting point tried to search but either i am stupid or noone else is shooting these bullets . . . using varget thanks george
  17. T

    anybody have a load for a 6mm ppc for an ar-15?

    Got the rifle all together and ready to load just curious if anyone has a strarting point. I have a few hundred 58 grain V max bullets. Thanks Gary
  18. 6

    Anyone here load for the 300 RUM

    I just bought a Remington 700P in 300 RUM and im looking for some tried and true loads with 190-210gr SMKs Trying to keep them over 3000fps.
  19. J

    Load Workup w/ one powder & bullet UPDATE w/ PICS

    I have a fairly good supply of H4895 and 168gr Hornady Match bullets, and I am curious what the most efficient way is to work up a load with the components. The gun is a Savage 10FP .308 with 24" barrel, and I have actually done a ladder test with the aforementioned items in this thread...
  20. T

    Seekin load data 260 rem Varget or RL15

    24" gap 1:8 twist for 123 Lapua scenar Really looking for a Varget load
Top Bottom
Back
Home
Forums
Merch
Alerts