powder

  1. 3

    Accurate 2460 for .308

    I have 50 rounds loaded with 168gr smk's and 42.7gr of accurate 2460. I will be shooting them this Saturday so I'll let everyone know how it goes. I am curious if anyone else has used this powder with much success in the .308 realm. Andrew
  2. doctordoctor

    Temp sensitivity question for 308 powders.

    I am really only familiar with Varget but have recently bought other types of powder to reload and have fun with. When will I really see effects of Temperature? Is there a resource to indicate an optimal operating temperature for the following: 1) XBR 2) 4064 3) Reloader 15 4) BLC-2...
  3. darth_ritis

    Which powder for supersonic 300 blackout in 1:7" twist barrel?

    I picked up a rifle in 300 Blackout and am setting up to reload for it. Powder is tough to find (read: impossible) but I'm curious which powder I should be hunting for? Supersonic loads with 125g slugs through a 7-inch twist barrel. I suspect H110 is the king but I'd bet some of you have some...
  4. rduckwor

    3RD Generation Shooting / VARGET 1 lbs 7/15/2013 1545CDT

    Get it while you can. http://store.thirdgenerationshootingsupply.com/browse.cfm/2,3663.html
  5. M

    Powder valley has Varget

    Just updated as I checked the site. See someone already posted.
  6. L

    my reloading debacle.... i need a faster powder...

    i need a faster powder.... an available faster powder.... he he... i hear the laughing! I have a GPS def rem700 18" .308.. awesome gun. moa at 300yds! but my velocity on the 175 smk is slow.... about 110fps less from load spec Varget has a near 2700fps load.. but it is a compressed load. I...
  7. K

    loading .308/.300 with pistol powder?!

    Hey there! I found this great Forum some time ago, until now i was just reading because my english is not very good but now i registered, and here comes first post : Did someone try to load the .308 or .300 with pistol powders like N110 or R910 and can share experience? I found some data on...
  8. Tactical30

    Too much powder?

    I just started reloading and got the Speer Book and the Sierra book to go over and read before I started. I went ahead and loaded some 52 and 53gr bullets for my Ar-15. Then I loaded some Hornady 68gr Match bullets with 24.1grs of Varget which is the lowest starting point for that load but it...
  9. GardDog

    Any way to ID factory powder?

    My #1 nephew asked me to remove the factory projectile and powder from some 7mm STW Remington 140 gr ammo that he had. The intention was to reload the brass with his choice of powder and projectile. Now I have a pile of powder that I can't ID. Any suggestions? Do ammo manufacturers use their...
  10. L

    Purchase of H4350 powder

    Anyone know where I can get some H4350 on the internet. Thanks
  11. shooter308

    which best 1 on quality on electic powder thrower?

    I am getting a powder thrower ( electronic ) would love to have the RBCS Charger master kit (and still may get it ) but i am looking at the Lyman 1200 DP3 with scale and thrower. Or the newest and best Pact. I have found a little thrower that is cool but i don't think i would be able to do...
  12. Killswitch Engage

    molybdendum powder for lube?

    i have a aquired some moly disulfide powder and was wondering if anyone has used it for a case neck lube for sizing case necks etc. i would assume it could be used sparingly and need not be wiped out when used. am i thinking wrong here?
  13. GBMaryland

    Which automatic powder scale?

    Ok, So I'm loading a fair amount of 70+ gr loads. It's a PITA to sit around and do them by hand... I've got an RCBS Charge Master, and a PACT scale/dispenser combo. Honestly, I find both of them to be sensitive to vibration and frequently off by .1 to .3 grains frequently. Are there any...
  14. F

    Powder for 408 CHEYTAC? Also reloading questions

    1. I have (stupid idea here). Any recommended laods for the 408 with it? I am shooting 420 grain Rocky Mtn bullets, both hunting and target. The only other powders I have handy are for 308 and 260 (IMR 4064) H414 and Win 748....assume no loads for those... 2. I have the ammomaster-2 .....which...
  15. Tactical30

    Blacks Hills Powder

    Does anyone Know what kind of powder Black Hills runs in their ammunition. My buddy pulled a bunch of Black Hills bullets out of their cases (dont ask) and has a bunch of BH powder. He was wondering what kind of powder it was so he can use it instead of tossing it. he pulled like 200rds. Stupid...
  16. duke308

    Charges per pound of powder

    Somewhere I had seen a spreadsheet showing the number of rounds you would get per pound of powder. Anybody have this info or the equation?
  17. ohiogunnut

    New GAP, Need Powder

    Any help would be greatly appreciated as I have checked all the usual on-line vendors. I should be getting my new 7mm Rem Mag from GA Precision any day, and all I have been able to find locally is a few lbs of Reloder 22. Any suggestions on where I can find more or a good quantity of Retumbo? I...
  18. Tactical30

    Good powder for 62gr. bullet?

    Im new to reloading and i am going to test some 62gr. HP Match bullets and was wondering what are some good powders to use from Hodgdon, IMR, Reloader or Vihta Vuori for a 62gr. Bullet? Anyone know any bullet manufacturers that make a 62gr. HP Match bullets besides Remington??
  19. C

    H powder???

    Anyone have a line on where I can get some H4350? PM me if ya don't want the world to know... In a jam need a bit o help... TIA!
  20. U

    >338LM powder choices for 24in barrel?

    Been working on loads for my Rem.700.338LM. I'm using 250grn SMK with Lapua brass and FGMM primers. So far I've tried RL-19...About 1.25in.5 shot groups. H-1000 same...RL-22 hovering around .75 to 1in. I see most everyone has 27 to 29 in barrels on their Lapuas, but mine is only 24in. looking...
Top Bottom
Back
Home
Forums
Merch
Alerts