precision

  1. LVshooter

    Las Vegas Precision Tactical Rifle Match RESULTS

    Had a great match today. Pretty decent weather for a change. The swinger target worked out great. Kurt 505 Dirk 468 Bear 432 Steve 389 Bruce 385 Werner 379 Rodger 348 Hugh 298 Will 261 Bill 259 Gary DNF Doing good until he got his brass stuck in his bolt. Good luck with that. Thanks to everyone...
  2. ggarrett1911

    Gunsmithing CDI Precision Savage DBM feeler...

    OK guys, I've been talking to Jeff at CDI Precision for the last couple of weeks about doing some bottom metal for the Savage folks. He's game for it, but we need at least 10 orders of the same action screw spacing for him to do it. For now we are looking at doing a run of DBM systems for the...
  3. grandslam

    Range Report NEWMAN PRECISION 260 Range report

    Well today me and Vu hit the range to do a little load development. We had a great day, no wind, a couple rain showers, and some really great groups from my 260 and his new GAP 243. I dont think that I can shoot any better than this. All I can say is that Jerry Newman builds a great rifle...
  4. I

    5/16/09 scssa bham alabama precision rifle match

    ITS THAT TIME AGAIN. OUR NEXT MATCH IS SATURDAY 5/16/09. EMAIL ME NOW FOR YOUR SHOOT TIMES. [email protected] THANKS LARRY HERE IS OUR WEB SITE LINK http://www.scssa.org/600-yard_rifle.htm [right now the longest shot is 440 yards, we are working on a 600 berm and when ready i will advise]
  5. Substance-P

    My first precision rifle (thanks Phylodog)

    This is my first precision rifle. Remington 5r (.308) in an ACIS 2.0 with Leupold Mark IV 6.5X20 ill TMR. Muzzle brake and Cerakote and a shilen trigger. Phylodog (Nash Gunwerx) hooked me up with Cerakote. I've included a before and after pic. He did an awesome job and although I'm biased, I...
  6. SmokeRolls

    Gunsmithing Recommendations on modifying HS Precision mags

    I have HS precision bottom metal and two new HS precision 10 round mags that are made for 308. The rifle is a 300WSM with a Mcmillan A5. What is the prefered method of modifying the mags in order to raise the bullet higher in the mag so that the bolt will pick up the WSM cartridge? Just bending...
    • SmokeRolls
    • Thread
    • mags modifying precision recommendations
    • Replies: 3
    • Forum: The Armory
  7. R

    Need help with precision AR build

    I need some help guys. I started with a Rock River mid length a4 flattop. It's a 16" hbar. I've had fun with it, and have put less than 300 rounds through it. What I would like to do is build a precision/varmint type ar. Going to go with a free float tube. Suggestions welcome. Not looking to...
  8. I

    thunder vally precision range-ohio

    for those of you that haven't tried this facility yet, tom sarver has a great long range tactical course of fire set up out past 1k. just shot it today for the first time. up/down angles, across valleys, every shot has a different wind condition [today it was gusting to 25 mph...]. it is a great...
  9. H

    Which stock for precision AR?

    I have a new LaRue 20" complete rifle. I will use it for 100-600 shooting. I have had both a UBR and a PRS from Magpul, and both were great stocks. But this is my first truly precision AR and I am thinking I should go with the PRS. Can someone who has used both extensively talk to me about...
  10. fordsoldier

    Gunsmithing CDI Precision Bottom metal

    I would like to thank Jeff Allen the owner of CDI Precisions for helping me with my Remmy 700 build up. I thought I was done except for the optics. But opted to go and install some bottom metal to run AISC magazines. CDI is the way to go. Talked with Jeff quite a few times before...
  11. G

    Team Precision Match, LRGC (SE PA) 5/9/09 9am

    http://langhornerodandgunclub.org/precisionrifle/precision050909.html We've run a team precision match before, but now we're going to score it like one. You can register as a single shooter and we'll pair you up based on skill level. Because we're not shooting for a brand new harley davidson...
  12. LVshooter

    Next Las Vegas Precision Tactical Rifle Match (May

    May 2nd, at Desert sportsman's range 9 (out to 400 yards) ,http://www.dsrpc.net/ 7am start time, bring 60 rounds. New summer start time 7am NOT 8am. Gonna try the new target.
  13. G

    Rifle Scopes Night vision choices for precision rigs?

    Anyone running any NV setups on their precision rigs? Just looking to get into it, and wondering what the options are, and which direction people are going in that have already done the research. I got to play with an NV setup on an M4 and was thoroughly impressed, but I'm more interested in...
  14. H

    Precision upper guidance

    Guys, I have a new LMT Defender Carbine. I am wanting to get a precision upper for it and would like to hear opinions on which route is best. I would like to be able to shoot it out to 600. I would like to stay with a 20" but would go longer is the accuracy is sufficiently better. I have a UBR...
  15. T

    Tac Pro Precision Rifle Opinion and Hotel Stay

    Any opinion on their class? Also any recommendation on hotel? I can't find them via the net locally (Mingus).
  16. S

    Phoenix Precision Rifle match 3 May

    Precision rifle match at phoenix rod and gun club at 7am , so be early. 50 rounds is what you will need. Knee and elbow pads recommended, also a veil or a shamag to block the sun is a good idea. We will be shooting the mover again. If you would like more info, email me at [email protected]
  17. A

    HS Precision

    Is there much difference between the HS pro series stock with the adjustable bedding block and the factory remington take of HS stocks? Thanks for your help.
  18. I

    4/11/09-scssa precision rifle match results

    Thanks to all who shot today, the wind was very "switchy". Please note next months match will be on May 16, 2009 [the 3rd saturday of the month] for May 2009 only, [I have to be out of town the second saturday]. Hope to cya then. Larry April 2009 Match 308 Class: By Score: Larry Levine 148...
  19. Down Under Hunter

    Mcree Precision Stocks- Pics or comments anyone ?

    Can anyone tell me about the newer model tactical stocks from Mcree ? I have read the thread on here, but I believe I saw Scott talking about some new improvements in that field / I have tried but have not got Scott on the ph yet. Any clues DUH
  20. T

    Gunsmithing HS Precision Bedding Question

    I will be bedding my Rem 700 tomorrow. The stock that I have is an HS Precision/ Aluminum block. My question is......... Do I want the recoil lug flush againist the aluminum block? Do I want to remove some of the aluminum to let the bedding compound fill in the void to create a better fit...
    • tunacan
    • Thread
    • bedding precision question
    • Replies: 1
    • Forum: The Armory
Top Bottom
Back
Home
Forums
Merch
Alerts