• Win a RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below!

    Join the contest

question

  1. A

    Rifle Scopes Spottng scope question

    I am in the process of changing out gear. To now, I have had spotters with the straight eyepiece. Would it be advantageous to get one with an angled eyepiece? I am thinking that the angled one would serve more purposes. Thanks!!
  2. W

    Suppressors m1a Springfield muzzle thread pitch Question

    Anyone know off-hand what the thread pitch is for an m1a? Obliged, WYK
    • WYK
    • Thread
    • m1a muzzle pitch question springfield thread
    • Replies: 2
    • Forum: The Armory
  3. BigBrother

    Advanced Marksmanship Fundamentals question...

    Hey all. As I continue to refine the fundamentals, and see the clear results, I'm learning and improving more and more, and am coming to a new step each time. My question now is around relaxation. I am using NPA, BRASS, and follow through, but one thing is tripping me up. Jim Owens talks...
  4. S

    Savage 10FP DBM question (Centerfeed)

    Hey guys, So I had a few questions about Savage DBM's in the newer centerfeed models: 1. Can the models that come from the factory with the Savage DBM (ie. 10FCP-K, Model 10 Precision Carbine, etc.) use the mags from the Model 10 BAS guns? 2. If not, could they be adapted to do so? 3...
  5. B

    XM .408 Magazine Question

    I just got a Windrunner XM .408. I got 6, 7 round mags with it that have a logo with the letters TM. They are pretty crappy. I was wondering if anyone had any experience with the CheyTac 7 round mags, and if they will work in a Windrunner? I just ordered one and CheyTac said they might work...
  6. S

    Rifle Scopes Bushnell 6500 2.5-16X42MM question??

    Hey guys, I've tried searching but can't seem to find the answer here or anywhere else (including Bushnell's website). I was wondering at what magnification the mil-dot reticle is calibrated on the Bushnell 6500 2.5-16X42MM scope. Anyone? Thanks guys, -Pete
  7. O

    Suppressors Question about 1911 CCWs

    I was wondering how many of you carry a full size 1911 as your daily CCW, is it practical, possible, comfortable? I know a lot of it is dependent on the size of the person for one, but for those of you who do, what are your thoughts? I've been shooting 1911s for years and would rather try to...
  8. GardDog

    Hunting & Fishing Pronghorn Hunt Question

    I have wanted for years to go on a pronghorn hunt. I have researched hunts from Arizona to the Dakotas. Have any of you hunted pronghorn in multiple locations that could point out the better spot? Any ranch or guide references? Any public land or WMA's that could be pointed out? This isn't...
  9. Brushout

    Gunsmithing Badger M5 Gunsmith Question

    Hello, I have a McMillan stock that is inletted for a standard BDL floorplate and I also have a Badger M5 that I want to install. I really dont feel comfortable doing it myself and would like to have some recommendations of some good smiths that can and HAVE done these before. All I need is...
  10. sobrbiker883

    Rifle Scopes Quick Premier question

    For those of you with the DT MTC turrets, I was wondering if the Heritage's turret works as a zero stop (does it only allow the two turns from your set zero up)? I've been ogling all the posts and have been through all the Premier site's stuff and didn't see a quick answer. I'm eagerly...
  11. J

    Remington X-Mark Trigger Question

    I just picked up a new 5R with the X-Mark trigger on it. I've got a AICS stock on the way for the rifle, but after some reading, I'm not sure if the x-mark safety will fit in the AICS. Am I going to need to replace the trigger or safety to fit the AICS? If so, will any aftermarket 700 trigger...
  12. Thud

    I have a question

    Do any of you guys shoot? I only here talk about what barrel is best, what bolt knob do I need, or is my paint scheme ok, or I need to sell my safe queen, or what scope is best for under XXX dollars. Where can I get bullets or I got 10 gazillion primers now what do I do. The reason I say this I...
  13. Swan

    Rifle Scopes Sun shade question

    Just curious, if shooting from shaded cover mostly, is the sun shade necessary? Will glare be more of an issue with it off?
  14. 4th Horseman

    Suppressors S.A. TRP OPERATOR (FULL LENGTH RAIL) question

    While on the topic of TRP Operators...Can anyone point me in the direction for a holster to fit mine...It has the full length rail. Any help would be appreciated. Thanks Billy C
  15. A

    ejector mark Gurus I have a question

    does the mark/Flow happen before the bullet leaves the brass or is it a couple inches down the barrel or toward the end or a combination of issues ?
  16. U

    Remington 700 Question

    Gents, Have recently moved to Hawaii and saw a 700 LTR in 308 in 20" going for 1200 bones today. Actually had both 223 and 308 on the shelf. I thought this price was a little steep but with a quick check on gunbroker it looks to be right around the asking price of many others. My question is...
  17. Ishallbie O'Cullkillin

    Suppressors 12ga Choke Question

    Picked up a S12 when they were still $450. and want to shoot clays with it. The barrel is only 19" long, so trap loads spread about 10' @ 30yds. What is the tightest pattern @ 30yds I could ever hope to achieve using extra full choke?
  18. 11B-B4

    AI AE MKII question...

    Im not sure if people have these yet but if so how is the two stage trigger? Also if a dealer could chime in, are these rifles currently in stock in the 20" threaded version, or if not how long is the wait? Thanks
  19. SandmanWs7

    Maggie’s Shooting question...

    <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Went shooting. 300 yard target .223 OK. Sorta a p***y gun. .22-250 Better but no knock down at 300 yards. .308 I don't care for. <span style="font-weight: bold">.30-06 Oh hell yes. 300 yards grouped 4...
  20. D

    Very quick question for the AICS owners here....

    How long is your rifle (with your particular barrel)? Due to its kit nature, I'm having a few dramas finding its dimensions once it’s all together. I'm just after the extreme dimensions so I can start looking for a hard case while I await the various ordered parts to arrive. Thanks all.
Top Bottom
Back
Home
Forums
Merch
Alerts