• Win a RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below!

    Join the contest

question

  1. 9

    Rifle Scopes A scope question...

    Why do some guys leave the insecption stickers on their scopes? Im talking to you Nightforce and Millett guys. Just wondering, I pulled mine off right away.....
  2. CE1371

    PTR91 KFM4 question

    I have the opportunity to purchase a PTR91 with the M4 butt stock. I'm not particularly in love with that stock, I know that the other stocks are removable, but is the M4 butt stock removable as well? I'd rather replace it with a regular stock. Thanks in advance for the advice.
  3. Metalhead0483

    Gunsmithing E.R. Shaw gunsmithing question

    I've got a large ring mauser action that I bought as the basis for a project gun. I want to turn it into a light and handy 7mm-08 (my prefered carabou round) Someone suggested that I go to ER Shaw since they'd rebarrel, drill and tap, reforge the bolt, and refinish the barreled action for me...
  4. mark5pt56

    Question on SPS stock mod**SHORT RANGE REPORT

    Hello, Just picked up the 700 SPS, the one with the flat bottomed plastic stock and high comb. Has anyone cleaned out the end section portion that touches the barrel? I was thinking if I should just shoot it without mods or clean it out before I do. Few minutes with a dowel and sandpaper. I...
  5. eddy

    Gunsmithing AR10 BCG question

    so i'm building an ar10, and i am looking into bolt carrier groups. i want my bcg to be magnetic particle inspected and shot peened, but i all i could find is ar15 bolts with this. am i looking for a ghost?
    • eddy
    • Thread
    • ar10 bcg question
    • Replies: 7
    • Forum: The Armory
  6. dixieland26c

    10/22 Barrel Block Question

    Does anyone know the torque specs on the barrel block screws and take down screw on an aluminum receiver?
  7. Lineman711

    Question about .44 mag and lead bullets

    I recently bought a used Super Blackhawk from a guy and last night he stopped by and gave me 3 boxes of his reloads. I'm the kind of person that doesn't fire others loads in any gun I own unless I know them to be a competent loader and he assured me he was. So I took the reloads. 3 boxes of...
  8. M

    AICS 2.0 Question

    Will the AICS fold to the right side? Or does it only fold to the left? TIA
  9. S

    Gunsmithing Another rem 700 action question

    I have noticed on one of my rem 700 that i have had blueprinted that after a dry fire the bolt seems a little stiff to open. On my factory rem 700's this isn't the case. Is this a good thing? I know the man that did the work is good to go so i am not to worried, just curious i guess. Like I said...
  10. S

    Remington 700 action question??

    I have been looking at some different rem 700 short actions for a 20BR build i am thinking of doing. Anyway while looking at a few different rem 700 actions i saw something that i dont ever recall noticing before. The rifle was a 222rem. the receiver was shaped a bit different were the back...
  11. J

    sizing die question

    I've recently had a 6.5x47 built and have been working on adjusting the full length sizing die for a minimal shoulder set back. I've simply used the "resize fired case, clean case, attempt to chamber, adjust the die down slightly, resize, etc" method until I achieve no major resistance when...
  12. BasraBoy

    Gunsmithing McM HTG stock question

    Can anyone recommend a basic toolkit for maintenance of a rifle with this stock and a 700 SA, particularly kit needed for removing/replacing the stock? Thanks in advance.
  13. R

    Rifle Scopes ring height question

    probably a topic thats been covered a bunch but im in a pinch and need a quick response. uso sn3 3-17x44 objective stiller 20 moa rail mtu contour barrel... What ring height should i go with? Medium or low? Will low even work? Looking at a set of Burris tac rings. Away from home and away from...
  14. superde

    Valkyrie owners question.

    What is the thread pitch under the AAC muzzle break? If you have a bathroom scale, please throw it on there and tell me what it weighs (what scope, etc). Thanks, David
  15. Kaisersose

    Gunsmithing Thread pattern question?

    If a barrel is threaded for a trued Remington 700 action -- Would it fit a Badger M2008 or TC Icon action? Thanks
  16. P

    Imperial sizing wax question

    -------------------------------------------------------------------------------- First, I tried this tonight for the first time. WOW! I love this stuff! I sized and deprimed about 50 cases in less time that I could have lubed, dried, then resized using my Dillon Spray Lube. I am a believer...
  17. S

    Gunsmithing switch barrel question recoil lug??

    Does the recoil lug HAVE to be pinned in order to have a switch barrel rifle? If so why? Thanks, Lee
    • skeetlee
    • Thread
    • barrel lug question recoil switch
    • Replies: 7
    • Forum: The Armory
  18. Tactical30

    Stock color question

    Does anyone know the "exact" color names for the colors on the Mcmillan A5 Desert Camo stock? I asked Mcmillan but they said they made those colors in the 1980s and said they named them light tan- medium tan- dark tan. Not so much help. I emailed NIC cerakote to see if they ever had to mix...
  19. mattmcg

    Rifle Scopes Weird question about mounting Seekins rings.....

    I just got some new S&B scopes in and started to get the rifles ready for installation with some Seekins rings. As I started putting the pieces on the bench and setting the rings on the picatinny rail, I set the rings on the rail so that the Torx screws on the base were along the right side of...
  20. duey1267

    Gunsmithing FN SPR question

    Ok, so I just got an FN SPR action from CDNN and I am planing on having a Douglas barrel installed by Douglas. The question is should I worry about not having the action " blueprinted" or " tuned" ?
Top Bottom
Back
Home
Forums
Merch
Alerts