.243 8 twist load ideas please?

[Powderburns]

​

My new build is going to be a .243 in 8 twist. I’ll be using Lapua brass and and 105 Berger VLDs. Anyone with experience with powder choices and charges I’d love the help. Thanks much!

 

[kilizyrag]

40 gr H4350 should put you at 2900’/s. Any faster and barrel life will be short.

 

[Powderburns]

I have a bunch of A4350, not quite the same burn rate but in the range enough? How do you feel about Varget?

 

[kilizyrag]

Varget may be a little to fast for the 243.

 

[Badmonkey]

I have a bunch of A4350, not quite the same burn rate but in the range enough? How do you feel about Varget?

A4350 is a tad slower burning than H4350, so it might a better fit. In my creedmoor the A4350 takes more powder to get the same velocity, but it shoots every bit as good. I’d definitely give it a try.

 

[Cascade Hemi]

RE22 or H4831S

 

[diggler1833]

Varget is too fast to be optimal for 105s in a .243. I'm sure it can be done, but you'll have a lot of empty case. H4350 - H4831 burn rates are going to provide better case fill and velocity.

 

[SmokingTRG]

Don't sleep on slower powders, like H1000. I'm getting 2950fps out of a 24" barrel, with what is essentially the starting load, shooting a 105gr. Has great case fill, as you can't get enough in the case to reach pressure issues (IME). It's easier on barrel life as well.

I started at 46.0gr and worked up from there to a compressed load. A little more veocity would be nice, but 46gr shoot the best, so I ran with it.

Recoil impulse of H1000 compared to h4350 seems to be a fair amount more pleasant as a bonus.

 

[Cascade Hemi]

RE26 is magic in 6CM and 243Win.

 

[6x45]

Been shooting 8 twist 243 for a long time. 4 barrels down and H1000 is the ticket for the 105 class bullets.

Groups like this are the norm: