25-06 load for deer.
- Thread starter JRB
- Start date
Re: 25-06 load for deer.
110 gr accubonds hammer in my 25wssm as do 115 vld and factory win 120 gr pep's.
110 gr accubonds hammer in my 25wssm as do 115 vld and factory win 120 gr pep's.
Re: 25-06 load for deer.
I used to load 56 grains of H4831 and 100grn Nosler BT, in a winchester case with Win standard primers. Its an old load may be above listed book max now. Used to Chron 3280 out of a 21inch barrel. This load shot about 3/4 of inch and killed like Thor's hammer.
I used to load 56 grains of H4831 and 100grn Nosler BT, in a winchester case with Win standard primers. Its an old load may be above listed book max now. Used to Chron 3280 out of a 21inch barrel. This load shot about 3/4 of inch and killed like Thor's hammer.
Re: 25-06 load for deer.
My deer/pronghorn load is Remington case, Fed 210M primer, Berger 115 VLD hunting, and 53.4 gr H4831-SC powder. My load is seated 0.075" off of the lands and shoots sub MOA to 400 yards. In my 24" barrel I am getting right at 3000 fps.
My deer/pronghorn load is Remington case, Fed 210M primer, Berger 115 VLD hunting, and 53.4 gr H4831-SC powder. My load is seated 0.075" off of the lands and shoots sub MOA to 400 yards. In my 24" barrel I am getting right at 3000 fps.
Re: 25-06 load for deer.
I've had good luck with 120 grain Nosler partitions and H1000. Can't remember the charge weight since it's for one of my dad's rifles, but I do remember it shooting very well
I've had good luck with 120 grain Nosler partitions and H1000. Can't remember the charge weight since it's for one of my dad's rifles, but I do remember it shooting very well
Re: 25-06 load for deer.
Ive gotten really good results with the nosler 115grn ballistic tipped backed by 51grn of imr 4831 and cci primers, good penetration and superb accuracy out to 400 yards. drops em dead in thier tracks.
Ive gotten really good results with the nosler 115grn ballistic tipped backed by 51grn of imr 4831 and cci primers, good penetration and superb accuracy out to 400 yards. drops em dead in thier tracks.
Re: 25-06 load for deer.
My old load was 115gr Partitions with R22. It killed deer faster than anything else I've ever witnessed.
Currently my 25-06 is being turned in to a custom and I plan to try 110 Accubond's and Retumbo first to see how that works when I get it back.
My old load was 115gr Partitions with R22. It killed deer faster than anything else I've ever witnessed.
Currently my 25-06 is being turned in to a custom and I plan to try 110 Accubond's and Retumbo first to see how that works when I get it back.
Re: 25-06 load for deer.
51.0 gns of IMR 4350 and a Nosler 100gn BT ~3000fps. or 51.0gn of H414/W760 and an 85gn Nosler BT ~3200fps.
51.0 gns of IMR 4350 and a Nosler 100gn BT ~3000fps. or 51.0gn of H414/W760 and an 85gn Nosler BT ~3200fps.
