300 Norma Mag load data

[ugsly]

I have done a little searching and cant find a lot of load data on this caliber. Most of what i can find is Retumbo & H1000, what are you guys using and seeing results with?

Thanks guys,
Casey

 

[rem `06]

Hello???....retumbo and H1000.....and maybe Ramshot Magnum...

http://www.snipershide.com/shooting/elr-beyond-1000-yards/22012-300-norma-mag.html

http://www.snipershide.com/shooting...g/234570-300-norma-ramshot-magnum-powder.html

 

[ugsly]

I did post awhile back, just looking for more info. I have Retumbo and Ramshot magnum. Has anyone tried the following below?

RL33
Power Pro 4000
RL25
US869

Casey

 

[Chandalar]

Ugsly,

I have been using H50-bmg with Hornady-208 Amax's, Here in Fairbanks the powder leaves the shelves realy fast, especialy H1000 and Retumbo. I have been very satisfied with the results so far. As there is no load data to be found, I started at 85 grains and went to 94 with no pressure signs on the brass thus far, accuracy came in at 90-91. I shot rounds sized with FL dies and also a neck sizing die with .002 tension, the neck sizing die made a noticable differance in a tighter group at 200 yards. the barrel is Kreiger 1:10 @ 26" MTU. No cronograph so no velocity at this time, rifle shot a 1/4 moa at 100 with all powder charges and from 85-91 grains, at 200 yards, 90 and 91 grains shot 1/2moa. All were shot at .055 off the lands. I'll try and post some photos in a day or two.