.300 win mag recipe
- Thread starter 09kale
- Start date
Re: .300 win mag recipe
Not yet, but check the "favorite loads" at the top. I'm into 208 amax, right now. Good Luck!
Not yet, but check the "favorite loads" at the top. I'm into 208 amax, right now. Good Luck!
Re: .300 win mag recipe
I like 66.2 gr. of RL17 with a 215M in Winchester Brass with the 230 about .030" off the lands.
Gets me right under 2900fps with single digit SD for average of 5.
At first I tried .005 in to .010 out and just wasn't too pleased with the consistency. Went back and played with it and found they liked alot of jump in this barrel. 3/8-1/2 MOA consistent now.
Also really loving the 208 AMAX with 68.5gr. RL17 in FC Brass and a 215M. Those are jumping .015" and giving me 3060fps
I like 66.2 gr. of RL17 with a 215M in Winchester Brass with the 230 about .030" off the lands.
Gets me right under 2900fps with single digit SD for average of 5.
At first I tried .005 in to .010 out and just wasn't too pleased with the consistency. Went back and played with it and found they liked alot of jump in this barrel. 3/8-1/2 MOA consistent now.
Also really loving the 208 AMAX with 68.5gr. RL17 in FC Brass and a 215M. Those are jumping .015" and giving me 3060fps
Re: .300 win mag recipe
Winchester brass, cci250 primers, touching the lands. 74 grs of H1000 just starting to show pressure signs. So I will settle a little under there.
Winchester brass, cci250 primers, touching the lands. 74 grs of H1000 just starting to show pressure signs. So I will settle a little under there.
