308 AR10 Build Info/Picture Thread

[AR805]

65CM shoots solid ~0.4MOA with Factory Loads

Mega MATen Mega Ext receiver set
22" Krieger barrel
Mad Scientist Muzzle
SLR Sentry 9 adj gb
US Optics ER25
Bobro mount
Geissele SD-E trigger
XLR Stock
JP LMOS BCG HP
JP SCS
AXTS ASS
Atlas Bipod & Accu-Tac bipod
Ergo grip

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/scontent.fsnc1-1.fna.fbcdn.net\/v\/t31.0-8\/18056607_1171748479603539_5490774435134618350_o.jpg?oh=7cd1fe5894df805bfee6efa9f3f0cd34&oe=5A26BC43"}[/IMG2][IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/ajY5op4.png"}[/IMG2]

 

[WYO09]

Just finished this build. 6.5 Creedmoor

Aero Precision upper, lower, bolt and hand guard
Magpul PRS gen 3
Rise Armament RA-535 Trigger
JP Silent Buffer
Athlon Cronus BTR
Larue Mount
Thunderbeast Muzzle Break
Dracos Barrel

It will need a few final adjustments but I wanted to get everything mocked up. Can't wait to get out and shoot it.

 

[Sierra_One]

My personally owned but current deployed duty rifle:
16 inch Lanxang Tactical VL-34
Lothar Walther barrel
Geissele SSA-E trigger
Luth-AR MBA-3 stock
Sig Sauer Tango6 2-12 scope
Geissele Super Precision extended mount
Sig Sauer Romeo3 reflex sight on a 45 degree Daniel Defense mount
Harris bipod
This is an older picture but I also changed the brake to a Precision Armament M4-72

Looking to trade in the scope soon for the Vortex Razor HD Gen II 3-18

 

[samuelcruz]

AR-10 .308/7.62 24" Long Range Premium Stainless Steel Tactical

Barrel: 24″ Rifle Length Stainless Steel, threaded

Chamber: .308 Win/7.62x51

Twist: 1 in 10”

Thread: 5/8x24

.936 Gas Block Diameter

Rifle Gas System

Flat top low profile DPMS style upper receiver

Forward Assist

Ejection Port Cover

X-treme Muzzle Brake

Rifle Length Free Float Slim Keymod Handguard

308/7.62 Bolt Carrier Group

308 Charging Handle

308 Lower Parts Kit

Magpul Moe Stock Assembly with 308 buffer and spring

 

[smvmarine]

Mega Maten Mega Extended M-Lok set
22" 6.5 Creedmoor (+2" gas) Bartlein w/ JP extension
SLR Sentry 8 Gas Block
Magpul PRS Gen 3
Larue Grip
Geissele SSA-E
JP Silent Capture Buffer Spring
JP HP Bolt
POF BCG
V Seven AMBI Safety
Geissele Optics Mount
NF ATACR 5-25x56 Mil-C

 

[sobrbiker883]

Budget build 308 Hunter.
Not truly "precision" AR, but holds ~1moa w/Hornady 165 Interlocks at 2625fps.
PSA (gasp!!) stainless 16" mid length
-RRA NM trigger (tuned a bit)
-Syrac G2 adj gas block
-GunTec Mlok
-Magpul ACS-L (for my tactical snacks)
-BRT Covert Comp (linear brake for putting all the bark down range)
-US Optics SR8C w/RWF 3 Gun reticle (BDC tracks w/in 1/2moa to 600yds with above mentioned load)
-roll of tape and krylon

Down the line it will get a JP high pressure bolt and a quality barrel.

 

[AR805]

Just finished this build. 6.5 Creedmoor

Aero Precision upper, lower, bolt and hand guard
Magpul PRS gen 3
Rise Armament RA-535 Trigger
JP Silent Buffer
Athlon Cronus BTR
Larue Mount
Thunderbeast Muzzle Break
Dracos Barrel

It will need a few final adjustments but I wanted to get everything mocked up. Can't wait to get out and shoot it.

nice barrel, id get a bigger muzzle though looks so little lol

 

[Jerdie16]

I didn't build it, but I am proud to own it.

 

[WYO09]

nice barrel, id get a bigger muzzle though looks so little lol

That's what she said.

 

[Firemn260]

Just finished the build.
Aero m5e upper receiver
Aero lower
Areo lpk
Geissle ssa e
Noveske bad ass charge handle
Jp 18" light contour barrel with rifle length gas tube
Jp low mass bolt carrier
Jp hp bolt
Jp silent capture buffer spring
SLR adjustable gas block
APA little bastard brake gen 2
Magpul stock and grip
Trijicon 1-8x28 accupower

 

[Forgetful Coyote]

Sent from my iPhone using Tapatalk

Details?

 

[ckmcmuso308]

Details?

KAC ECC with Mams break, CQBSS h27d in geiselle
mount, surefire m600 intellibeam

 

[Forgetful Coyote]

KAC ECC with Mams break, CQBSS h27d in geiselle
mount, surefire m600 intellibeam

Just curious if you know sir, does KAC rifle their own barrels? Theyre only ones I know of with cut rifled 5R chrome lined tubes...

 

[ckmcmuso308]

Just curious if you know sir, does KAC rifle their own barrels? Theyre only ones I know of with cut rifled 5R chrome lined tubes...

I honestly don't know, I'm sure someone on here does though.

 

[jasonfaz]

“Enlightened” 12.5” POF

 

[optizz]

I didn't build it myself 2 POF 308's
PST 6x24-50
Trijicon ACOG 6x48
SIG Tango 6 5x30-56
PRS stocks

 

[levi8599]

6.5Creedmoor
22" bartlein from precision firearms
Aero upper lower
SAS Resistor mx

 

[drshoot]

JP-LRP07
6 Creedmoor
22"
JP adjustable gas block with detente adjustment screw.
Silent capture spring.
Total awesomeness

JP Coupon code: 43SS1015
5% off major builds
10% off accessories.

 

[bfoosh006]

PSA carbine, Criterion 18" Middie barrel, trued receiver face and Loctite 609 , LaRue MBT, some QC , burnishing and polishing from me ( what do you expect from a $700 initial purchase ) Vortex 6-24x50 PST FFP EBR-2C MOA

100yd groups, benched bagged front and squeeze rear... 5rds FGMM 168gr, 20rds "rapid fire DAG"

 

[Jefe's Dope]

This is my first precision build. I've moved quickly to a bolt rifle. Or soon to be. I just received 200 rounds of Federal Sierra Matchking to take out beyond 100. I assume I'll be collecting this brass and reloading as I'm going to start w/ the bolt gun in 6.5. I'll try and report back some groups at distance.

Finally finished this build. PSA Gen I lower w/ Geissele SSA-E and Strike Ind. flat wound AR10 buffer spring. PSA Gen II upper 18" SS. PA 4-14 ACSS reticle on Aero Precision mount. Magpul Pro BUIS.

The groups were using 175 gr. Federal Sierra Matchking. 90 total rounds in 90 minutes. Zero malfunctions. Extremely happy.

 

[steelcomp]

Old school...

 

[LVLAaron]

Aero M5 Reciver
Faxon 20" Match Barrel
ELF Ar10 Trigger
Aero M5 handguard
Superlative Adjustable gas block
Toolcraft BCG
VG6 Brake
Magpul adjustable grip
Aero LPK
Raptor ambi charge handle
Magpul PRS
JP Captured Silent Spring
SWFA SS 10x

 

[19delta]

My Windham Weaponry .308 SCR. the day I bought it and what it is today.

 

[macvrlamm]

My 308 gas gun: and it is a shooter

AREO PRECISSION MATCHED UPPER/LOWER
JP-BCG NIPLATE
JP SPRING/PISTON RECOIL UNIT
VELOCITY TRIGGER 3.5 LB
STAINLESS ANTI ROOL PINS (TRIGGER)
SMALL PARTS ALEX PRO
BLACK TEFLON COATED SEMI BULL PACNOR 22" BARREL
TARRGET CROWN
ADJ GAS BLOCK
RIFLE LENGTH GAS TUBE SS
WARNE RINGS
HOUGE GRIP/BUTTSTOCK/FOREND SET
HARRIS PODS
GLOBAL SCOPE 56MM

 

[riot1013]

Here is my most recent build:

- Aero M5 upper and lower, Cerakoted a custom mix of burnt bronze and midnight bronze.
- Troy 15" MLok rail, Cerakoted burnt bronze.
- 20" Ballistic advantage 6.5 CM barrel.
- Brownells NiB BCG (looks alot like a Toolcraft BCG).
- Geissele SSA-E trigger with a yellow JP trigger spring (nice, crisp 2.5lb break).
- Bushnell 4.5-18x44 LRTS in an ADM Recon mount.
- Stock has been switched to a FDE SOPMOD with an LMT/Ergo grip.

I will be adding a Surefire SOCOM muzzle brake so that I can mount my can, as well as a Geissele Super Charging handle and upgrading to a Geissele Super Precision SR-25 20-MOA mount in the very near future.

I love the look and feel of this beauty. I'll be taking it to the range this weekend for the first time...can't wait.

 

[CreedmorePitcher]

looking at a M5 receiver set from aero to start my bulid! anything i should know about this receiver it seems to be cheap for the quality... found it for 219 on snakeriverarmory.net ?also uncle moak love that rifle thats what im going for where did u get the stainless can?

 

[riot1013]

looking at a M5 receiver set from aero to start my bulid! anything i should know about this receiver it seems to be cheap for the quality... found it for 219 on snakeriverarmory.net ?also uncle moak love that rifle thats what im going for where did u get the stainless can?

If you are going to go with the Aero, get their lpk to finish it out. They will work with DPMS pins and such from a functionality standpoint but their overall widths are different so they won’t look right. Overall though the Aero stuff is top notch.

 

[Mike 556]

If you are going to go with the Aero, get their lpk to finish it out. They will work with DPMS pins and such from a functionality standpoint but their overall widths are different so they won’t look right. Overall though the Aero stuff is top notch.

Recently finished a 6.5 Creedmoor build using the Aero lower and upper receivers, used their LPK. Everything fit tight and assembly was easy.
Mike

 

[DuneShoot]

Larue in .260.

 

[GwOtTrApLoRd]

Didn't build it but here's my new POF P308 EDGE SPR, Vortex Viper PST GENII in an ADM Recon 20moa mount.....hopefully she's a shooter. If anyone has any tips, tricks or insight it would be greatly appreciated....good factory loads to test out for a 308 gas gun with an 18 and a half in barrel??

 

[MSTN]

Who doesn't like a handsome big block gas gun that weighs in at what most small block 5.56 guns weighed just a decade ago? This 16" .308 sports a not-so-sveldt fluted Bartlein by Craddock Precision with an intermediate length (KAC) gas system with a full mass JP bolt carrier group (high pressure type) and a fairly heavy Magpul STR buttstock. Yet the rifle weighs in at just a few ounces over 8 pounds!

 

[Forgetful Coyote]

Who doesn't like a handsome big block gas gun that weighs in at what most small block 5.56 guns weighed just a decade ago? This 16" .308 sports a not-so-sveldt fluted Bartlein by Craddock Precision with an intermediate length (KAC) gas system with a full mass JP bolt carrier group (high pressure type) and a fairly heavy Magpul STR buttstock. Yet the rifle weighs in at just a few ounces over 8 pounds!View attachment 6886595View attachment 6886596View attachment 6886597View attachment 6886598

Interesting. Didnt know Zev did rifle stuff, how do you like those receivers Mr Wes?

 

[MSTN]

It's my first big block with ZEV logo, used at the request of the customer. I was very pleasantly surprised that there were no surprises.

 

[plong]

Interesting. Didnt know Zev did rifle stuff, how do you like those receivers Mr Wes?

Zev purchased/"merged with" Mega

 

[psychogecko]

Pair of 6.5 Creedmoors...shooting like a dream

 

[Wile_Coyote]

I have a couple. Waiting on a Saker ASR 762 can to try out on them. I really like them both.

First up (6.5mm Creedmoor):

Aero M5 upper and lower
22" Rainier Ultramatch 6.5mm Creedmoor barrel
Aero nitride BCG
15" SLR Intrepid rail
SLR Sentry 9 adjustable gas block
Nitride rifle length gas tube
JP muzzle brake
LaRue LT745 QD 20 moa 34mm scope mount
Steiner 5-25x56 M5Xi Military
Flatline Ops scope level
Aero charging handle
XLR stock
JP silent captured spring (H weight configured)
Magpul MIAD grip
BAD-ASS ambi selector
AR Gold trigger
Atlas QD bipod

Next up (6mm Creedmoor):

Aero M5 upper and lower
22" Wilson Combat match 6mm Creedmoor barrel
Toolcraft nickel boron BCG
16" SLR Solo rail
SLR Sentry 8 adjustable gas block
Stainless rifle length gas tube
Wilson Combat Q-Comp comp
LaRue LT745 QD 20 moa 34mm scope mount
Steiner 3-12x50 Miltary/Tactical scope
Aero charging handle
XLR stock
JP silent captured spring (H weight configured)
A2 grip (to be changed)
BAD-ASS ambi selector
Elftmann Tactical Match adjustable trigger (full rifle pic has LaRue MBT, was changed after ~80 rnds)
Atlas QD bipod

 

[Forgetful Coyote]

I have a couple. Waiting on a Saker ASR 762 can to try out on them. I really like them both.

First up (6.5mm Creedmoor):

Aero M5 upper and lower
22" Rainier Ultramatch 6.5mm Creedmoor barrel
Aero nitride BCG
15" SLR Intrepid rail
SLR Sentry 9 adjustable gas block
Nitride rifle length gas tube
JP muzzle brake
LaRue LT745 QD 20 moa 34mm scope mount
Steiner 5-25x56 M5Xi Military
Flatline Ops scope level
Aero charging handle
XLR stock
JP silent captured spring (H weight configured)
Magpul MIAD grip
BAD-ASS ambi selector
AR Gold trigger
Atlas QD bipod

View attachment 6888855

Next up (6mm Creedmoor):

Aero M5 upper and lower
22" Wilson Combat match 6mm Creedmoor barrel
Toolcraft nickel boron BCG
16" SLR Solo rail
SLR Sentry 8 adjustable gas block
Stainless rifle length gas tube
Wilson Combat Q-Comp comp
LaRue LT745 QD 20 moa 34mm scope mount
Steiner 3-12x50 Miltary/Tactical scope
Aero charging handle
XLR stock
JP silent captured spring (H weight configured)
A2 grip (to be changed)
BAD-ASS ambi selector
Elftmann Tactical Match adjustable trigger (full rifle pic has LaRue MBT, was changed after ~80 rnds)
Atlas QD bipod

View attachment 6888856

Is it the Rainier Mod2 barrel? How does it shoot?

 

[Wile_Coyote]

Is it the Rainier Mod2 barrel? How does it shoot?

No it is the original from Rainier with a rifle length gas system. It shoots very well. I've been really happy with it and would not hesitate to purchase another.

 

[GLB]

Built this 6.5 CM for some 3 gun long range matches.
Aero upper/lower
18" Criterion match barrel
MI MLok handguard
Geisselle SSA Triger
Superlative Adjustable gas block
Bushnell LRTS 3-12-44

 

[JimmyT]

My AR10 with Straight Jacket Barrel System.

Aero Precision complete M5 lower
Aero Precision M5 upper
Aero Precision Nitride BCG
Ambi Charging handle
Aero Precision 12” m lok forward rail
La Rue bipod
Vortex 1st Gen Viper PST 4-15 x 50 with La Rue QD rings
DD beard resistant stock
16” SJBS with adjustable gas block

Shoots sub-MOA with 168 grain FGMM and reloaded clones
3 shot group with 175 SMK and Varget.

 

[riot1013]

View attachment 6879471
Here is my most recent build:

- Aero M5 upper and lower, Cerakoted a custom mix of burnt bronze and midnight bronze.
- Troy 15" MLok rail, Cerakoted burnt bronze.
- 20" Ballistic advantage 6.5 CM barrel.
- Brownells NiB BCG (looks alot like a Toolcraft BCG).
- Geissele SSA-E trigger with a yellow JP trigger spring (nice, crisp 2.5lb break).
- Bushnell 4.5-18x44 LRTS in an ADM Recon mount.
- Stock has been switched to a FDE SOPMOD with an LMT/Ergo grip.

I will be adding a Surefire SOCOM muzzle brake so that I can mount my can, as well as a Geissele Super Charging handle and upgrading to a Geissele Super Precision SR-25 20-MOA mount in the very near future.

I love the look and feel of this beauty. I'll be taking it to the range this weekend for the first time...can't wait.

*EDIT* Finally got a chance to put some rounds down range with this, and all I can say is wow! The 6.5 Creedmoor is like cheating in the wind. I'll be taking her out to 1000 yds this weekend.

 

[TeufelHund]

New to me COLT LE901.
Untitled https://www.flickr.com/photos/156312720@N03/

 

[Srikaleak]

JP LRP07

 

[wilsoncs3980]

Here's the build list,
-Ascend Armory 7075 Match Receiver Set
-JP Low Mass Bolt Carrier w/high pressure bolt
-JP Silent Capture Spring / buffer assembly
-Draco's 22" 6.5 Creedmoor barrel
-Area 419 Sidewinder Brake
-Elftman .308 Match Trigger
-Fortis 15" Switch Rail
-Magpul PRS Stock
-Radian Raptor Ambidextrous Charging Handle
-Leaper UTG MLOK Bipod Set

 

[Toolness1]

Wow, some awesome stuff here. I'll add my humble budget rifle and hope it doesn't stain the thread

Hello, new member here.

I have always wanted an AR10. I am mostly a curio and relic guy, but I love my modern stuff too. I have been collecting/shooting/reloading since 2012. I was a gym rat until back problems forced me to seek out an alternative hobby. It turns out that firearms were the answer to that issue...

This is a Palmetto PA10. I have been on disability since December due to my back issues so my funds are limited. I have had good luck with Palmetto in the past so I decided to take a chance on this. I told myself that I would be happy if it is a 1.5 MOA rifle at best.

This group was shot with an early load workup consisting of '87 LC brass, Factory seconds Sierra 168gr MK and 4064. I am still developing loads and working on the rifle, so groups should only improve. I have around 350 rounds through this and the only malfunction I've had was caused by my brass catcher.

When I shot this attached group, I still had the horrible mil spec trigger, a 15 dollar pawn shop scope sitting so low you could hardly scrunch down to get a sight picture, and of course the barrel is not free floated. It also had the Magnetospeed chrono on while shooting. Not bad for a budget rifle for someone who is in so much pain they can hardly sit still to shoot...

In the picture I have the new Vortex Diamondback 4-12 scope on and the riser which is temporary until I get the money to buy a proper handguard and gas block to free float this bad boy. Then I will get a proper mount/rings... I have also installed a RRA 2 stage match trigger which should really help my groups as well. This had a particularly bad and heavy milspec trigger when I got it.

I'm also getting a spinal fusion surgery so hopefully I'll be less gimpy soon!

Sorry for the long rant.... Now to the pics.

Specs:
Palmetto Gen 2 PA10 (535 bucks shipped!)
18" Stainless 1:10
RRA 2 stage match trigger
Ebay special muzzle brake
Ebay special grip
Monstrum tactical riser
UTG cheap-o rings
Vortex Diamondback 4-12x40 scope

 

[rhsth4]

Upper Parts

JL Billet Upper/Hand guard
Faxon 18’ rifle length barrel
Noveske KX5
Odin adjustable gas block
Spikes Tactical Nickel Boron BCG
Spikes Tactical gas tube
Strike Industries dust cover
BCM Mod 3 charging handle
Magpul Bipod adapter
Harris 9-13 bipod
Troy Industries Dioptic offset BUIS

Lower Parts:

JL Billet Lower
CMMG lower parts kit
CMC single stage flat trigger
Ergo pistol grip
Battle Arms 45 degree ambi safety
Luth buffer tube and spring
Enidine buffer
Magpul PRS stock

Optics:
American Defense Recon QD 30 mm 20 MOA Mount
Vortex Viper LR 6-24X50

 

[mystryak]

Mega MATEN .308 16" barrel LOADED with goodies

 

[donho00]

My recent AR10 build

Noveske N6 matched upper/lower
Noveske 15inch NSR rail
Gen 2 PRS
JP timed brake
JP 20 inch heavy 308
JP Lmos and high pressure bolt
JP Silent Buffer
SLR 9 block
Geissele National Match

still load testing. But getting it narrowed down

 

[mystryak]

She's a real beaut Clark

 

[Nittynate]

Here's the build list,
-Ascend Armory 7075 Match Receiver Set
-JP Low Mass Bolt Carrier w/high pressure bolt
-JP Silent Capture Spring / buffer assembly
-Draco's 22" 6.5 Creedmoor barrel
-Area 419 Sidewinder Brake
-Elftman .308 Match Trigger
-Fortis 15" Switch Rail
-Magpul PRS Stock
-Radian Raptor Ambidextrous Charging Handle
-Leaper UTG MLOK Bipod Set

View attachment 6911765

View attachment 6911766

View attachment 6911767

What kind of grip?