338 LAPUA MAG Sierra 300gr # 9300 Proj match Chamber Reamers. 3.98/3.99 " OAL CTG Length made for us by JGS with the rotating pilot head to get the most out of .338 Lapua Mag and with the Sierra #9300T projectiles by seating the start of the boat tail at the case neck junction. CIP chamber print and our JSG chamber print attached. The Reamers were made up for us after Kevin Thomas, the chief Sierra Ballistics at the time, seated them to the ideal length for us and sent 10 samples to JGS to be turned into these reamers after the print was made. If you love the Sierra Proj and can work with 3.98/3.99 " OAL CTG Length you end up with lower pressures from the Proj not being shoved back into the cartridge case in addition to extra case capacity, if you agree with the idea
Chamber Prints
http://cainalongbranch.com/uploads/...1.5_chamber_reamer_print__CIP_for_Compari.PDF
Program Overview (with link to above PDF)
http://cainalongbranch.com/OrdnanaceDevelopements
We have both roughing and finishing reamers and we will honor the original price of $195.00 USD each plus shipping as JSG does not carry them, nor at the original price. Based on current inventory remaining only, subject to prior sales
You can either PM or use our contact form for faster turn around
Chamber Prints
http://cainalongbranch.com/uploads/...1.5_chamber_reamer_print__CIP_for_Compari.PDF
Program Overview (with link to above PDF)
http://cainalongbranch.com/OrdnanaceDevelopements
We have both roughing and finishing reamers and we will honor the original price of $195.00 USD each plus shipping as JSG does not carry them, nor at the original price. Based on current inventory remaining only, subject to prior sales
You can either PM or use our contact form for faster turn around