$350 ARs

[deersniper]

If you aren’t already personally armed at this point I don’t know what to say.

But you should be encouraging / helping right minded friends and family and acquaintances acquire basic firearms and ammo A nudge in the right direction is sometimes all it takes.

If you want peace . . .

BLEM PSA 16" M4 Carbine Length 5.56 NATO 1:7 Nitride Freedom Rifle Kit - 507617B

BLEM PSA 16" M4 CARBINE LENGTH 5.56 NATO 1:7 NITRIDE FREEDOM RIFLE KIT - 507617B 16" Barrel lengthM4 Profile BarrelChrome Moly barrel5.56 Nato Chamber1 in 7" twist rateF-Marked Front sight postA2 Flash HiderSling LoopStandard Hand Guards w/ heat shieldsForged upper receiverT-MarksBolt Carrier...

palmettostatearmory.com

 

[Maggot]

Hell of a deal, likely a great long term investment.

 

[sirhrmechanic]

Ah... link? Or do we need to be in the 'Secret Underground PX' for this one? I haven't checked my access lately.

Sirhr

 

[Cowpokey]

That's an inexpensive way to get started. I bought some "BLEM" stuff from them before, couldn't find the "BLEM" on any of it.

Ah... link? Or do we need to be in the 'Secret Underground PX' for this one? I haven't checked my access lately.

Sirhr

Here ya go.

 

[babyguppy]

You see the 3 pack of lowers for 150 (50 a piece)? that's a complete rifle under 400.00

 

[Cowpokey]

You see the 3 pack of lowers for 150 (50 a piece)? that's a complete rifle under 400.00

Depends on your FFL, mine (LGS/FFL/indoor range) charges $35 each...spend less buying a lower they already have at the shop.

 

[babyguppy]

My FFL is 35 per application, (at my local Local Gun Shop) ; that's kinda crappy 35 per item.

 

[TurboTrout]

Good buy for a 80% patriot build

 

[10ring'r]

Hear all kinds of shit slinging about PSA. I've bought many parts, and a few rifles from them. They ALL ran, and the parts never broke. I've got one rifle that has over 12k rounds through it, and still has the original bolt, w/extractor in it. So, there's that. Mac

 

[deersniper]

Hear all kinds of shit slinging about PSA. I've bought many parts, and a few rifles from them. They ALL ran, and the parts never broke. I've got one rifle that has over 12k rounds through it, and still has the original bolt, w/extractor in it. So, there's that. Mac

Yup

My marauder 7” runs perfect on a m16

 

[TurboTrout]

Hear all kinds of shit slinging about PSA. I've bought many parts, and a few rifles from them. They ALL ran, and the parts never broke. I've got one rifle that has over 12k rounds through it, and still has the original bolt, w/extractor in it. So, there's that. Mac

We’ll it is what it is

For a rack rifle for shit happens it’s great, but it ain’t a JP

 

[10ring'r]

We’ll it is what it is

For a rack rifle for shit happens it’s great, but it ain’t a JP

After owning a "few" rifles, of multiple brands, they all start looking the same to me.
Mac

 

[TurboTrout]

After owning a "few" rifles, of multiple brands, they all start looking the same to me.
Mac

You have a JP?

If not

 

[10ring'r]

You have a JP?

If not

Not a complete rifle, but, I do have an upper I use for my 600yd. shoots. Oh... and I did stay at a HIE once.... Mac

 

[TxWelder35]

I’ll say this about PSA, thousands of rounds through one and it has never hiccuped.

Only AR I have that has had multiple malfunctions is one that has cost 5x what I paid for the PSA with all top tier parts

 

[pmclaine]

“Freedom Kits”

 

[pmclaine]

I’ll say this about PSA, thousands of rounds through one and it has never hiccuped.

Only AR I have that has had multiple malfunctions is one that has cost 5x what I paid for the PSA with all top tier parts

These days, in order to make a shitty AR….it has to be your intent to make a shitty AR.

 

[cattleman99]

BCA had actual complete AR’s for $350 shipped. M-Lok handguard too

 

[pmclaine]

BCA had actual complete AR’s for $350 shipped. M-Lok handguard too

The dilemma is keeping them too expensive for the John Brown gun club to buy but as cheap as possible for Patriots.

 

[TurboTrout]

Not a complete rifle, but, I do have an upper I use for my 600yd. shoots. Oh... and I did stay at a HIE once.... Mac

All that matters for the most part is the upper

 

[E. Bryant]

For those that have 15 high-end ARs for themselves but none to distribute to neighbors, this seems like a hell of a deal.

Here's a decent lower:

Home

DetailsThe Anderson Manufacturing AR-15 stripped lower receiver offers superior quality for your next AR budget build at an affordable price. These MIL-SPEC semi-auto lowers are machined from high-strength 7075-T6 forged aluminum with a type III black hardcoat anodized finish for durability...

www.primaryarms.com

I recall seeing a place offering a five-pack of those for around $150, but I don't have a link handy.

 

[CaptArab]

The stainless rifle gas 18* just might make folks feel silly for spending a grand on $1000 Gucci uppers.

 

[DOA]

The stainless rifle gas 18* just might make folks feel silly for spending a grand on $1000 Gucci uppers.

Oh, having an AR upper with a Bartlein barrel is a nice thing to own.

 

[deersniper]

BCA had actual complete AR’s for $350 shipped. M-Lok handguard too

80 percents keep the papers away

 

[gunsnjeeps]

I've had a member here poo-poo Rock River Arms because his barrel nut was a different steel and more expensive. My PSA FDE Magpul with a 16 inch barrel built on a Bushmaster lower is competitive at 200 yards to both of my RRA's. A friend shot the lower with PSA's enhanced polished trigger with his upper and buttstock a few years ago and beat his personal bests and X counts for the week.