Yoteski Private Full Member Minuteman Feb 13, 2017 962 1,195 Monday at 12:09 PM #1 Monday at 12:09 PM #1 Looking for some powder/charge ideas for the 6.5 PRC with the 100 eld vt. Thought it might make a pretty wild coyote round at about 3,400 fps or so. Thanks y’all. Reactions: rlsmith1
Looking for some powder/charge ideas for the 6.5 PRC with the 100 eld vt. Thought it might make a pretty wild coyote round at about 3,400 fps or so. Thanks y’all.
R rlsmith1 Legalize Freedom Supporter Full Member Minuteman May 1, 2019 2,193 2,049 Midwest Monday at 1:39 PM #2 Monday at 1:39 PM #2 Following
powdahound76 Old tired dad Full Member Minuteman Sep 7, 2011 10,080 26,760 Denver CO Monday at 1:54 PM #3 Monday at 1:54 PM #3 Look at Hammer bullets load data. They have starting loads for their light bullets. Should be close? Hodgdon says Accurate 4350 Start at 55.2 max is 61.4 with Hornady brass, 100 gr sierra, and rem 9 1/2 primer. Max is reported at 64k psi Reactions: Yoteski
Look at Hammer bullets load data. They have starting loads for their light bullets. Should be close? Hodgdon says Accurate 4350 Start at 55.2 max is 61.4 with Hornady brass, 100 gr sierra, and rem 9 1/2 primer. Max is reported at 64k psi
Krob95 Black Multicam Master Race Supporter Full Member Minuteman Sep 7, 2019 4,547 7,057 NoCo Monday at 2:10 PM #4 Monday at 2:10 PM #4 Running them at 3200 in my 22” 6.5cm. They put em down pretty good man. Attachments IMG_5380.jpeg 635.6 KB · Views: 16 IMG_5391.jpeg 1.2 MB · Views: 17 Reactions: powdahound76, Yoteski and rlsmith1