I'm going to start my first 6x47 build and I got some good reamer advice from an experienced gunsmith but I still have one question...
What freebore puts the 105 Hybrid just in front of the neck shoulder junction as to avoid potential donuts from necking down? Ultimately I want to shoot a 110 sierra with a 50-80 thou jump but there isn't a lot of info on this bullet yet. I figure if I get some info on the Berger Hybrid I can get a rough idea of where I need to be with the freebore. Right now my initial thought is around .120 freebore. I know the 110 has a very small bearing surface but with that freebore I should be able to jump it .050 and still be ahead of the neck shoulder junction. And if they don't shoot I'm hoping that will still work with the hybrid.
I searched and didn't find any specific info on this topic. Thanks for any replies!
What freebore puts the 105 Hybrid just in front of the neck shoulder junction as to avoid potential donuts from necking down? Ultimately I want to shoot a 110 sierra with a 50-80 thou jump but there isn't a lot of info on this bullet yet. I figure if I get some info on the Berger Hybrid I can get a rough idea of where I need to be with the freebore. Right now my initial thought is around .120 freebore. I know the 110 has a very small bearing surface but with that freebore I should be able to jump it .050 and still be ahead of the neck shoulder junction. And if they don't shoot I'm hoping that will still work with the hybrid.
I searched and didn't find any specific info on this topic. Thanks for any replies!