thinking about doing a 7wsm build and ive been seeing a lot of guys using the badger ordnance m5 dbm. i havent actually seen one for a wsm so im assuming its the short action gaurd but what mags are you using?
7wsm shooters
- Thread starter rasman35
- Start date
Re: 7wsm shooters
I have a 270WSM and I use the CDI BM: http://www.cdiprecisiongunworks.com/
The mags are 300WSM type four: http://www.alphaindmfg.com./store/index.php?route=product/product&product_id=53
Here is a link to my build. You can see the inletting, BM, and mags near the bottom of the page: http://www.snipershide.com/forum/ubbthre...302#Post1805302
I have a 270WSM and I use the CDI BM: http://www.cdiprecisiongunworks.com/
The mags are 300WSM type four: http://www.alphaindmfg.com./store/index.php?route=product/product&product_id=53
Here is a link to my build. You can see the inletting, BM, and mags near the bottom of the page: http://www.snipershide.com/forum/ubbthre...302#Post1805302
Re: 7wsm shooters
Badger short action DBM's will work. And it actually uses the AI .308 mags. The only difference is they are modified.
The plate in the front is usually removed for longer OAL
and the feed lips are widened.
I buy my the modified 308 mags for my WSM from GA Precision. Alpha mags has a 10 round WSM mag they sell too
Badger short action DBM's will work. And it actually uses the AI .308 mags. The only difference is they are modified.
The plate in the front is usually removed for longer OAL
and the feed lips are widened.
I buy my the modified 308 mags for my WSM from GA Precision. Alpha mags has a 10 round WSM mag they sell too
Re: 7wsm shooters
Something else to consider would be the Seekins WSM DBM assembly. They offer an internal mag length of 3.14" so you will have no issues with nearly any bullet you wish to shoot. A slight modification is needed to the bottom of some actions but could be justified if you need it for long bullets.
Something else to consider would be the Seekins WSM DBM assembly. They offer an internal mag length of 3.14" so you will have no issues with nearly any bullet you wish to shoot. A slight modification is needed to the bottom of some actions but could be justified if you need it for long bullets.
Re: 7wsm shooters
I have a Seekins set up on my 7wsm and it operates nicely. My smith did the modifications to my action so that I am able to load what I want. The freebore wasnt cut to an extreame length as I had it set up for the 162 A-max. I'm at the lands at 2.95 COAL which works out pretty good with room to spare in the magazine. It's a great set-up for the short action and the mag release is very comfortable especially when switching from an AR platform.
I have a Seekins set up on my 7wsm and it operates nicely. My smith did the modifications to my action so that I am able to load what I want. The freebore wasnt cut to an extreame length as I had it set up for the 162 A-max. I'm at the lands at 2.95 COAL which works out pretty good with room to spare in the magazine. It's a great set-up for the short action and the mag release is very comfortable especially when switching from an AR platform.
Similar threads
