Suppressors Accu-Washers and TBAC Brake?

[USMC22]

Home

DetailsPrecise timing of your muzzle device has several benefits. For muzzle brakes, it allows you to perfectly orient your brake to match your shooting style. With suppressors and suppressor mounts, a properly aligned muzzle device will drastically reduce the risk of baffle strikes and enhance...

www.primaryarms.com

I’ve seen the peel washer videos and remembered using these washers on my 556. Any reason to not use these with a TBAC SR muzzle brake?

 

[NWnewguy]

I'm not TBAC, but I don't see why it wouldn't work. The problem I would have would be paying the $23. I use the ones that I get with every Griffin Armament brake and I have a lot left. I think they sell them on their site as well for $7. There's enough shims in the kit for multiple brakes.

 

[Zak Smith]

Should be fine, just make sure everything's flat and verify alignment afterwards

 

[MOUNTIC]

I use them on my CB brakes. Work well.

 

[USMC22]

Anyone have a factory Remington LTR that the peel washer would not go all the way back on?

I had to thread the peel washer that came with the brake on and this is as far as she’d go. Ruined the peel washer getting it off.

@Zak Smith got back to me via e-mail (on a weekend, twice!) recommending sending it out to have the threads worked.

I’m struggling with the thought of putting more money into a factory gun. I’ve have a manners T2A mini chassis due in January 2021 and had a few things done when I got it (stock opened for Badger M5 Enhanced trigger guard and bolt knob installed - both done by Badger).

Long term I want a custom 308 (what can I say I’m vanilla)... Being lefty makes things a bit more difficult.

 

[Zak Smith]

Lack of undercut... Easy fix, or you could always throw a new (better) barrel on there.

 

[USMC22]

Lack of undercut... Easy fix, or you could always throw a new (better) barrel on there.

I was thinking that long term and the rest of the stuff to go with it: truing, side bolt release etc. the barrel only has maybe 700 rounds through it I’d have to look.

 

[USMC22]

@Zak Smith think it’s worth it on the Remington action or just wait and buy a barreled action? I threw down what I had saved up on the suppressor and training for this year.

 

[Zak Smith]

If it shoots good groups, just have the undercut touched up.

 

[USMC22]

If it shoots good groups, just have the undercut touched up.

Thanks Zak,

It’ll be headed your way Tuesday. Appreciate the help.

 

[USMC22]

@Zak Smith

Got my rifle back today with the brake installed. As I’m putting it back together I had a dumb question...

I sent it in with the picatinny rail installed.

Would they have removed this for any reason? I’m only wondering because I used red 272 loctite previously and don’t want to mess with it if it was not removed but would redo the loctite if it was.

Again, really appreciate it and happy to have the rifle back!

 

[Zak Smith]

We wouldn't have even taken the barrel out, you're good.

 

[USMC22]

We wouldn't have even taken the barrel out, you're good.

Thanks man, really appreciate it!