Accuracy International AT-X

[phlegethon]

So…has anyone had any feeding issues after getting a fixed magazine back from AI?

 

[TylerN]

Congrats! What number in line were you?

What number in line are you? I think I ordered a few days after you at the end of December.

 

[Rory_Fritz]

What number in line are you? I think I ordered a few days after you at the end of December.

I was #3, but ordered in April of last year. Recieved tracking today!

 

[Darkside-Six]

You know what would be amazing. The gun being offered in 6 creed, or 6 gt or 6 dasher or anything that people who buy this gun want to shoot.

Drop $5K, have to drop another $800+ on a barrel plus all the accessories needed you are looking at closer to $6.5-7K.

You can build a gucci impact/foundation/bartlien/TT diamond with rails, brake, weights, plate/bag system for less than $4500.

Then you have an additional 2-2.5K to put towards a tangent or ZCO or just buy a gen 3 razor outright.

But…..it won’t be an AI.

 

[Darkside-Six]

Anybody else get their 2nd Gen in or just @BuLLet? And for those who have changed the trigger shoe...does the action need to come out of the chassis to do this or can it be changed while assembled?

No. You can change the shoe with it still together. But any adjustments you need to make in the trigger and you’ll have to pull it all out.

 

[MarinePMI]

So…has anyone had any feeding issues after getting a fixed magazine back from AI?

Not that I'm aware of.

 

[pucker]

No. You can change the shoe with it still together. But any adjustments you need to make in the trigger and you’ll have to pull it all out.

First stage weight is adjustable without removing…2nd stage is removal only.

 

[TylerN]

I was #3, but ordered in April of last year. Recieved tracking today!

Congrats. I must have had you mixed up with someone else. If you ordered a year ago I think I need to downgrade my expectations by at least half a year

 

[edm714]

No. You can change the shoe with it still together. But any adjustments you need to make in the trigger and you’ll have to pull it all out.

Awesome. Thank you.

 

[northshorelumber]

I also received tracking info on a Dark Earth AT-X from Euro today. When I last checked my place in line, I was #9. Still no hinge though.

 

[Islas82]

So am thinking of picking up one of these, are there any issues? How’s accessory support looking? Really hope to get a folding hinge!

 

[168BTHPM]

I don't own any AI rifles but I have some of their chassis.

 

[mark5pt56]

1st pic, please educate me on what is on the top? --other than a scope--

 

[Tritiumdials]

Where the hinges at that “shipped last week”

Now that Elon Musk bought Twitter, hopefully this information sees the light.

 

[Supersubes]

1st pic, please educate me on what is on the top? --other than a scope--

Thats a US Optics SN-9.

 

[168BTHPM]

1st pic, please educate me on what is on the top? --other than a scope--

It’s a US Optics SN-9

 

[MTxTwelve]

15.6 lbs (unloaded) - could definitely get it under 15 with a smaller scope and rings.

 

[Rory_Fritz]

Finally got it. Everything looks good so far except the follower not keeping the bolt back. Not sure how much I care though.

 

[Defender3]

Finally got it. Everything looks good so far except the follower not keeping the bolt back. Not sure how much I care though.

You're killing me smalls... Mine won't land until tomorrow...

 

[Rory_Fritz]

You're killing me smalls... Mine won't land until tomorrow...

I didn't plan on getting it today, but got the call around noon and decided to leave work early. I couldn't help it

 

[edm714]

Finally got it. Everything looks good so far except the follower not keeping the bolt back. Not sure how much I care though.

Looks good! Sounds like they are shipping by color again. Too bad I ordered black. Probably another month or 2 out for those...

 

[kthomas]

Looks good! Sounds like they are shipping by color again. Too bad I ordered black. Probably another month or 2 out for those...

Send it to Branden at Custom Gun Coatings and you will have a better looking chassis than the goofy OEM colors.

He does excellent work, has done a few chassis' for me.

 

[edm714]

Send it to Branden at Custom Gun Coatings and you will have a better looking chassis than the goofy OEM colors.

He does excellent work, has done a few chassis' for me.

I've seen his work posted on here. It looks good. I'll keep him in mind if don't like my blackout version with all black accessories.

 

[Islas82]

Just got notification that red ones are in stock at MH.

 

[Heffo]

To the Ozzie’s waiting on Black ones, talked to Danny today, and they will be on a plane in a couple of weeks. Good news! Put in your PTA

 

[Curahee19]

EO had a couple red ATX this morning. I saw them, took my kids to school, got home to order and they were gone.

One was mine

 

[mark5pt56]

It’s a US Optics SN-9

Excellent, thanks!

 

[Curahee19]

Anyone know the torque values for all the screws ?

 

[Darkside-Six]

Anyone know the torque values for all the screws ?

It’s a few pages above this. Just search back a bit. Someone posted it in here

 

[deersniper]

Anyone know the torque values for all the screws ?

 

[carlooa]

Called EO—they still don’t know when the hinges are coming and said they don’t know if AI had shipped them yet.

 

[phlegethon]

Called EO—they still don’t know when the hinges are coming and said they don’t know if AI had shipped them yet.

I’m shocked.

 

[Rory_Fritz]

What's the part number for the short bridge rails?

 

[Defender3]

I was able to pick mine up last night. Swapped the 24" 6.5CM for a 26" 6BR. I need a hinge and a long bridge and I'm bipod poor having to scrounge this one from the AX. Also have to decide on a fat bastard, Deadair or SOCOM 7.62-RC? Nice touch with the thumb drive. Haters stay away.

 

[blbennett1288]

I was able to pick mine up last night. Swapped the 24" 6.5CM for a 26" 6BR. I need a hinge and a long bridge and I'm bipod poor having to scrounge this one from the AX. Also have to decide on a fat bastard, Deadair or SOCOM 7.62-RC? Nice touch with the thumb drive. Haters stay away.

FWIW your LaRue scope mount is on backwards

 

[Defender3]

FWIW your Larue scope mount is on backwards

Busted! Trying to get a quick pic for the thread and with no Spuhr to use.

 

[phlegethon]

Not that I'm aware of.

I guess it’s just me. I sent @Scott Seigmund a video of my AT-X failing to feed 6 Creedmoor with the “repaired” magazine they sent me, but there’s been no reply yet.

I’m kind of annoyed at this point with AI’s poor customer service, refusal to acknowledge the obvious design flaw that made the rifle not work with AX mags that have worked in every other AI rifle, and various other slowly addressed issues. Hinges. Straight barrels. The fastener of the week. It’s a fantastic rifle with one fatal flaw and several easily fixed annoyances, but AI says take it or leave it.

 

[goatboy]

Accessory rails for the at-x? Are they the same as the other models or specific to AT-X?

 

[Darkside-Six]

Accessory rails for the at-x? Are they the same as the other models or specific to AT-X?

Same.

 

[Defender3]

FWIW your LaRue scope mount is on backwards

This one is for you @blbennett1288

 

[M8541Reaper]

Busted! Trying to get a quick pic for the thread and with no Spuhr to use.

You don’t have to lie to us. This is a safe space. We all have been there. …alone…in the garage…sweaty…tingling in anticipation to get the pic posted…

Mistakes happen. “Directions unclear. Dick stuck in mount” happens to everyone.

 

[kthomas]

I was able to pick mine up last night. Swapped the 24" 6.5CM for a 26" 6BR. I need a hinge and a long bridge and I'm bipod poor having to scrounge this one from the AX. Also have to decide on a fat bastard, Deadair or SOCOM 7.62-RC? Nice touch with the thumb drive. Haters stay away.

I feel like AI's need TBAC suppressors.

Everything else looks out of place on an AI

 

[Defender3]

You don’t have to lie to us. This is a safe space. We all have been there. …alone…in the garage…sweaty…tingling in anticipation to get the pic posted…

Mistakes happen. “Directions unclear. Dick stuck in mount” happens to everyone.

But what if I was left handed?

 

[M8541Reaper]

But what if I was left handed?

Then you should have been purged.

Sorry, fuckin auto correct is getting crazy these days. What I mean to say was

 

[blbennett1288]

I feel like AI's need TBAC suppressors.

Everything else looks out of place on an AI

TBAC and NF/S&B

 

[carlooa]

Idk if I’m more annoyed by my dominus in atf jail or the hinge in ai jail.

 

[Part Timer]

New 6CM barrel showed up from Proof today. Just waiting on a long bridge from across the pond and maybe, one day if I'm a good boy, a hinge.

 

[AXMC]

New 6CM barrel showed up from Proof today. Just waiting on a long bridge from across the pond and maybe, one day if I'm a good boy, a hinge.

View attachment 7858693

Did you have that cerakoted gray/tungsten....or it it just the lighting and it's actually black......or elite sand playing tricks again?

 

[Part Timer]

Did you have that cerakoted gray/tungsten....or it it just the lighting and it's actually black......or elite sand playing tricks again?

No sir, it’s just a standard black version in odd lighting making it look that way. I thought the same thing myself after I posted it.

This will be getting cerakoted or rattle canned… just haven’t decided which route or if I have it in me to spray bomb an AI…

 

[AXMC]

No sir, it’s just a standard black version in odd lighting making it look that way. I thought the same thing myself after I posted it.

This will be getting cerakoted or rattle canned… just haven’t decided which route or if I have it in me to spray bomb an AI…

Thanks. You should get it tungsten.....or maybe tungsten base with Kryptek pattern on top.