-
Having trouble using the site?
Contact support
Accuracy International AT-X
- Thread starter Peter Laurvick
- Start date
Just heard that Euro is placing the first order for Tikka chassis this week. They were just waiting on the part number to be finalized. Shouldn’t be long now.
Anyone put the MPA EVG Grip grip on one? Got pictures? I searched a bit and found the MDT grip on one but not the MPA.
Hmmm...that may very well be the answer to a .223 trainer. My pockets are already starting to feel lighter.
AT-X newbie here so sorry in advance but I have some dumb questions.
Is there a way to make anything other than Keyslot work? I am looking for a countersunk flush cup, short picatinny rail, and 45° BUIS and have a short bridge to mount things on as needed. Real AI accessories are slim pickings up here.
How have 12 round conversions been working out? Someone affixed an Altus extension and someone else was trying MDT. Not sure if they expoxied or welded the baseplates on or stretched springs or what.
Any reason I couldn't or shouldn't use a medium height 20 MOA Spuhr mount for a gen 2 Razor on the 20 MOA base instead of medium Vortex Precision rings? It will put my zero in bottom 15% of available travel I think with 110 MOA available.
Is there a way to make anything other than Keyslot work? I am looking for a countersunk flush cup, short picatinny rail, and 45° BUIS and have a short bridge to mount things on as needed. Real AI accessories are slim pickings up here.
How have 12 round conversions been working out? Someone affixed an Altus extension and someone else was trying MDT. Not sure if they expoxied or welded the baseplates on or stretched springs or what.
Any reason I couldn't or shouldn't use a medium height 20 MOA Spuhr mount for a gen 2 Razor on the 20 MOA base instead of medium Vortex Precision rings? It will put my zero in bottom 15% of available travel I think with 110 MOA available.
Nope. Keyslot or nothing. I run a 12 round AW. You can epoxy the baseplate. Stretch the spring too. Make sure when you cut the bottom of the mag out you leave the little wing tabs.
That's unfortunate about Keyslot. Doesn't seem to be any aftermarket anything.
What baseplate did you use? MDT are easy to get here so I am hoping those work.
AI has what you’re looking for. I have to ask why you want 45 degree irons on a 15ish lb bolt gun
Keyslot sucks big dickus, but IA is the only ones who actually put rails(or available rails) on their actions that are coplanar with a rail on the bridge, even get the mofo in 20moa. Makes running clipons and shit way easier. Someone needs come out with a. Lightweight chassis that's designed for this purpose. My xlr element 4.0 with their nv bridge, had to chop the f outta it, run 1.5", rifns, barely have the bridge clear my 3b barrel, and run a low pro Pic rail on the bridge mount to get close to aligning. The carbon in the Pic below was pulled and sent back to Bart, but the 18" 3b 22cm is back on the bumblebee and gonna wreck song dogs this fall/winter.
Since the eotech CLIPLR is so tall I was really worried bout getting ranges on the mars-lc, but shit actually worked out in my favor for once, it's works great even with this big hunk of thermal shit out front.
Since the eotech CLIPLR is so tall I was really worried bout getting ranges on the mars-lc, but shit actually worked out in my favor for once, it's works great even with this big hunk of thermal shit out front.
For when high magnification optics are too much but shooting from the hip won't cut it.
I can put a Holosun at 12:00 or 1:30 on my Spuhr but iron sights don't need batteries, can fold down to avoid being a snagging hazard, and don't get wet or snowy easily. Yes the rifle is heavy but still usable standing close in for a snap shot or mover I think.
Last edited:
Shotgun, 3" BB or T shot. Will do the job inside 50y. All sets we run multi man, there's a gas gun, bolt gun, and a scatter gun. Necessity when they sneak in from behind I the daylight when you trying to be invisible and not moving.
Yeah that's too many guns to carry. I bought this rifle because it's cool and now I am going to force it to be "practical" just like my last AI. My buddy put a set his Cadex and they don't really hurt anything.
I was able to source this adapter that lets you use the old AI hooks with the new system. Also pictured is my low profile hand stop/stop my bipod from sliding off and getting lost if it comes loose.
Frankly this Dickslot system can suck my, well I don't want to be too vulgar. It's my fault though. I just thought for sure someone had to be making aftermarket rails and other attachments.
Frankly this Dickslot system can suck my, well I don't want to be too vulgar. It's my fault though. I just thought for sure someone had to be making aftermarket rails and other attachments.
Attachments
Anarchy Outdoors makes a nice qd sling mount, if you want to use a flush cup type attachment. Not that there's anything wrong with the old paracord and HK snap.
That's the unit I want I just need to find someone who ships here. The paracord was just to get me out of the house with a sling haha.
It's been covered to death but I would describe the bolt lift as stiff with the detent positions being quite noticeable. My AE is noticeably smoother after well over 100,000 cycles so I am sure it will break in.
I'm sure everyone knows what they look like at this point but here is mine. Waiting on a handguard wrap, stock hinge, Deluxe Ergo Grip, sling swivels, and magazines.
I thought the silver/gold Heathen 2 looked kind of gaudy. It looks like a deadbolt latch.
Hopefully it works well.Attachments
Last edited:
Where are you located?That's the unit I want I just need to find someone who ships here. The paracord was just to get me out of the house with a sling haha.
It's been covered to death but I would describe the bolt lift as stiff with the detent positions being quite noticeable. My AE is noticeably smoother after well over 100,000 cycles so I am sure it will break in.
I'm sure everyone knows what they look like at this point but here is mine. Waiting on a handguard wrap, stock hinge, Deluxe Ergo Grip, sling swivels, and magazines.
I thought the silver/gold Heathen 2 looked kind of gaudy. It looks like a deadbolt latch.
I'm in Canada eh. I don't think it's an ITAR issue or anything I think it's just limited distribution and our only retailer carries limited stock
@Rodney65 I see that you have both generation 1 and generation 2 Heathen muzzle brakes mounted on your rifles. How do you rate the Gen2 Tunable Heathen muzzle brake compared to the previous / standard model ?That's the unit I want I just need to find someone who ships here. The paracord was just to get me out of the house with a sling haha.
It's been covered to death but I would describe the bolt lift as stiff with the detent positions being quite noticeable. My AE is noticeably smoother after well over 100,000 cycles so I am sure it will break in.
I'm sure everyone knows what they look like at this point but here is mine. Waiting on a handguard wrap, stock hinge, Deluxe Ergo Grip, sling swivels, and magazines.
I thought the silver/gold Heathen 2 looked kind of gaudy. It looks like a deadbolt latch.
Noticed the half length bridge, do you prefer it to the full length and why?That's the unit I want I just need to find someone who ships here. The paracord was just to get me out of the house with a sling haha.
It's been covered to death but I would describe the bolt lift as stiff with the detent positions being quite noticeable. My AE is noticeably smoother after well over 100,000 cycles so I am sure it will break in.
I'm sure everyone knows what they look like at this point but here is mine. Waiting on a handguard wrap, stock hinge, Deluxe Ergo Grip, sling swivels, and magazines.
I thought the silver/gold Heathen 2 looked kind of gaudy. It looks like a deadbolt latch.
Only taking it out once I found recoil mitigation to be perhaps slightly better than the old model, although I kept changing ammo types so it was hard to notice anything too subtle.
I didn't mess with the tuning weight as I had a lot going this first trip out.
I bought it very lightly used and that's what it came with. With a Spuhr 6mrad 4601 I can't even use a sunshade without hitting it. I will never have a clip on due to cost and the limited legal utility of them here so the bridge is just for looks.
Is that speculation or is there some substance to it?
Sorry I probably wasn't more helpful. Insite is switching entirely to the newer style brake so they must think it's an improvement.Thank you, I will follow your feedback along the way
Certainly, especially since the first version is a very successful and appreciated one, so if they give it up, they can't risk coming up with a less effective product.
I have the old version and I am also interested in buying Gen.2, and for this reason I am interested in the opinions of those who have already mounted it on the gun
Interchangeable bolt heads are coming out after the mag and 223 bolt face.
Sarcasm
Sarcasm
More like their is a shortage of other accuracy international products so they are trying to get some sales on these also. I really don’t see the at-x selling as good as the sniper looking rifles. I just bought one from Europtic and the same price was given there and they are a dealer. Now mile high had everything at msrp yet. Mine was shooting half moa with factory hunting sellier and bellot I was using for barrel seasoning. I am really impressed. I did not want a bonded action and liked the straighter recoil impulse. Smooth action and a tac driver.
Thats a smoking price on the AT-X. Does make one a little leary pulling the trigger on one then 4 months from now the latest iteration arrives and you’re thinking damn I should’ve waited. Personally wanted to see the AT-X with a shorter front rail.
Why. If running less than 18” barrel , just cut the toedend off.
Hmm. I didn’t look close. Your right. I see most in that ad have screw adjust cheek but at least one is finger adjust.My guess would be they are clearing out the Gen 1 and Gen2 series chassis…
Or someone put up a bogus add
Whats the third Gen have ?
Thumb screw is gen 3
Allen screw is gen 2
I just received my new at-x from Europtic for $750 off and the photo showed gen 2 Allen screws but when it showed up it was gen 3. Lucked out for sure. Elite sand was on sale.
Yes but being advertised seems different like something is coming down the pike
Or maybe the market is just that slow. I see AXSA selling for rock bottom prices in the for sale section.
Or maybe the market is just that slow. I see AXSA selling for rock bottom prices in the for sale section.
I think inflation is killing our economy and everything is more expensive and gun companies are feeling that. The ar craze slowed way down and ammo is going up like gas prices. We all shall see.
Two more dumb questions, sorry.
The AT-X manual doesn't mention anything about the trigger other than the obvious shoe reach. Are the trigger instructions I attached the most up to date and if not is there a place to find the instructions?
Also just curious, how bad would it be if a person spun on a barrel and didn't set the set lock screw or under tightened it? Would the groups open up a little or would the rifle explode? I couldn't find that in the manual either.
The AT-X manual doesn't mention anything about the trigger other than the obvious shoe reach. Are the trigger instructions I attached the most up to date and if not is there a place to find the instructions?
Also just curious, how bad would it be if a person spun on a barrel and didn't set the set lock screw or under tightened it? Would the groups open up a little or would the rifle explode? I couldn't find that in the manual either.
Attachments
Last edited:
The rifle won't explode. Plenty of people shoot rifles with hand tight barrels. I wouldn't recommend it for any type of field use where the barrel can start backing out. Hard to say what your individual rifle will do with the groups. Some people have reportedly found their rifle shoots better/worse with certain torque values on the clamp screw on AI.
Obviously the safe course of action is to always torque it to the recommended value every time.
The trigger instructions are correct. However, I'd highly......highly recommend you let someone very familiar with this trigger or triggers in general do the adjustments. The comp trigger has a ton of adjustability and with that comes the very easy possibility of rending it unusable until you get the settings figured out again.
Thank you very much for the reply. I wasn't sure if the allen key was meant for emergency barrel changes or if 49 inch pounds was critical. Also I could see myself getting distracted changing barrels and leaving it completely loose.
I wanted to play with overtravel and weight but if it's that fickle I will leave it as it is really quite good now. If I did adjust it I planned to video myself so I could hopefully undo whatever I did if necessary.
Oh, I forgot about the Allen key. You can absolutely hand tighten (with Allen key) the barrel and be field effective. It may or may not shoot as good as it does torqued.
You should be g2g on the over travel. It's when you start messing with the combination of pull weight and the first stage travel that things can get difficult. It's a give/take on adjusting those and the sear engagements.
One more dumb question: I noticed my trigger blade and trigger blade rail I guess it is (?) have quite a bit of side to side movement/play. The bottom of the trigger blade probably moves 1/8" and feels loose. Is this normal?
Also it took quite a bit of force with a 2.5mm allen driver to loosen and then retighten the trigger blade.
Last edited:
