Thanks. These things must be significantly lighter in the rear and lighter overall than previous AI rifles.
-
Having trouble using the site?
Contact support
Accuracy International AT-X
- Thread starter Peter Laurvick
- Start date
Thanks. These things must be significantly lighter in the rear and lighter overall than previous AI rifles.
Nice setup. What does it weigh like that?
In my earlier posts mentioning bolt lift I hope I am not giving the impression I that I don't like the rifle or that I am not an AI fan. Yes the bolt could be a bit lighter but with a good bipod and/or good position it is pretty much unnoticeable.
They have a few quirks but I think they are overall a very solid rifle.
Last edited:
Looks like winners of the NASTI comp at Hat Creek were using ATX and possibly AXSR
That AT-X had to have had a custom firing pin spring to make the bolt lift lighter, with possible lapped lugs to make that action buttery smooth when cycled…
That AT-X had to have had a custom firing pin spring to make the bolt lift lighter, with possible lapped lugs to make that action buttery smooth when cycled…
Hey now! I do lube my shit. I use Lucas gun oil on the bolt body, and tw25b grease on the cocking ramp.
Does anyone have an AT-X with a Proof CF 24” 6.5 or 20” 308 barrel? If so what’s the weight and how does it balance
I have one that I think is 24 in. I can measure the length when I get home. In my AT-X, with a s&b 5-25, Atlas bipod, and titanium suppressor, I think it was 19 lb.
Looks like winners of the NASTI comp at Hat Creek were using ATX and possibly AXSR
View attachment 8249716
That AT-X had to have had a custom firing pin spring to make the bolt lift lighter, with possible lapped lugs to make that action buttery smooth when cycled…
So black versions are more accurate and have a lighter bolt lift? Maybe I should get a black one instead of a dark earth one.
Last edited:
All mil competition? So competition was pretty light...Looks like winners of the NASTI comp at Hat Creek were using ATX and possibly AXSR
View attachment 8249716
That AT-X had to have had a custom firing pin spring to make the bolt lift lighter, with possible lapped lugs to make that action buttery smooth when cycled…
Can confirm. Mine was blue, had it painted black. Went to bed with a Curtis and a 50lb bolt lift, woke up with an Impact and a 6oz bolt lift. Crazy shit.
Gen 3 AT-X without any bridge or folder mechanism, with a proof 24" 6.5cm barrel with no muzzle device and with an empty mag inserted: 11lb 4.2oz
Balance point is front edge of mag well.
Would you guys still choose an ATX over the MPA PMR with the coup de grace action for competing? Not concerned about money, just wondering which rifle is going to reign supreme.
People win matches with both and neither is going to make anyone a better shooter or decide the outcome if the same person decided to shoot one or the other that day.
The advantage to the AI’s is the QC barrel and the double stack mags that run flawlessly. Other than that you can drop a custom in an ATX AICS and have a rifle that for all intents and purposes is functionally indifferent as far as a match rifle goes.
If you like AI’s or what one, buy one and run it and vise versa. There’s no right or wrong answer.
Definitely going to fall on shooter abilities there.
I went AI because I always wanted one. That was my sole reason for purchase.
Yeah I'm going to order the ATX. My other rifle is an AX338 and why deviate?..
Precision Rifle Gear - Does anyone make a ARCA rail hand cover?
Does anyone make a cover for an ARCA rail to make it more comfortable to grip? If you have a rail on the bottom of the rifle it can be annoying to hold. I’m thinking something like the rubberized covers you can put on Pic rails that can be pulled off quickly if you want to use the rail but...
www.snipershide.com
Hopefully someone makes one
Like you said ideas soft enough to slip on off from side
I put an factory 6.5 cm barrel that Preston sold me that had been cut down to 18". It hadn't been shot yet.
Rounds 41-50 put 10x rounds just over a 0.5" hole at 100yds. Velocity was 2647fps with an SD of 6!
Load was 41.8gr H4350, Fed Large Rifle Primer, Hornady Brass, 140ELDM.
Rounds 41-50 put 10x rounds just over a 0.5" hole at 100yds. Velocity was 2647fps with an SD of 6!
Load was 41.8gr H4350, Fed Large Rifle Primer, Hornady Brass, 140ELDM.
Attachments
I just picked up a new AT-X from my dealer last night. I’ll double check but it looks like a 4 groove. Feel free to hmu. I’ll be swapping it out this weekend for a proof carbon.
Curious as to why the preference for HH over the Bartlein.
Last edited:
Thanks. Not going to get into the why, it's not worth an arguement.
The Hoptic 308 quiver. Used the Keymod version and flipped the hardware around to clear the magwell.
I did it; placed my order with Eurooptic when i saw 1000.00 off and taxes paid. Looking to order hinge and long forearm this weekend. 6cm. Havent been this excited on a rifle for years.
What is everyone using on magnification? I know it is a loaded question; i have a 4-16 milxt sitting here i am probably gonna start with it and see if i need more magnification at the property where i can shoot up to 1000
What is everyone using on magnification? I know it is a loaded question; i have a 4-16 milxt sitting here i am probably gonna start with it and see if i need more magnification at the property where i can shoot up to 1000
Depends what you want to do. If sticking with NF you can’t go wrong with the 7-35. Would be about a $1000 upgrade if you sold or traded your 4-16. For a paper puncher you can never go wrong with more magnification. Rarely do you need 4-8 power. But upper end of 25-40, although not necessarily used on full power, is nice to have when you want it
I don’t think you’ll be happy with the 4-16 for 1k. I’ve had several and they’re great gas gun or out to 500 yard hunting style optics. But the magnification left me wanting more for longer ranges
I wholeheartedly agree with you. Funny you mentioned gas guns, i use the 4-16 on gas guns, and my 223 proof rifle.
I will shop for a higher magnification i guess
What you want to spend is the question. Athlon Cronus, Burris XTRIII, NF 7-35, ZCO 527 or 840 etcI wholeheartedly agree with you. Funny you mentioned gas guns, i use the 4-16 on gas guns, and my 223 proof rifle.
I will shop for a higher magnification i guess
That 4-16 is a great optic and one of my favorite designs and reticles. It has a place but for a 1,000 yard precision rifle in my opinion isn’t it
Magnification doesn’t help when mirage kicks up.
I get along fine with a 420. Hit the 10x6 ipsc at 940 at a comp. also a wolf target at 12 or 1400.
Prolly wasn’t even at full power.
But yeah if I didn’t use it with clip ons / for hunting I’d be using a 527 for sure
I get along fine with a 420. Hit the 10x6 ipsc at 940 at a comp. also a wolf target at 12 or 1400.
Prolly wasn’t even at full power.
But yeah if I didn’t use it with clip ons / for hunting I’d be using a 527 for sure
I have been using the mil-xt reticle for a few years now so i feel comfortable. I do not mind zco with a t3 but likely will be sticking to an nf
I love the S&B PMII 5-25 with a T3 or H59 reticle. I find the T3 is faster on a gas gun with the H59 fitting bolt guns better.
I rarely shoot above 15x even out to 1100, but that leaves you in the middle of the zoom range with a lot more light transmission.
I rarely shoot above 15x even out to 1100, but that leaves you in the middle of the zoom range with a lot more light transmission.
I hit 600-700 with 16x staying around 12x with my gas gun very comfortably; and usually i am never on the higher end of the magnification, maybe 5-25? I don’t know
I own both the 7-35 atacr and ZCO 527. I think you’d be happy with either. That Mil XT is my favorite reticle
If you get a NF atacr just get the 7-35. The 5-25 is the worst glass of the atacr line. According to those who owned them both. I’ve owned all but the 5-25
I've seen some great deals on ZCo optics in the PX lately. Running a 5-27 on my AT-X, and it seems just about perfect.I wholeheartedly agree with you. Funny you mentioned gas guns, i use the 4-16 on gas guns, and my 223 proof rifle.
I will shop for a higher magnification i guess
HeAvY BoLt LiFt WiLl NeVeR wIn A mAtCh…
@Steelcityprecision 1 Day Team Match. Format was hike to blind holding area, self stage brief in blind holding area, move to stage, find, range and engage with 6 min par time. Rinse and Repeat. Covered about 4 miles in 5hrs over six stages.
@Steelcityprecision 1 Day Team Match. Format was hike to blind holding area, self stage brief in blind holding area, move to stage, find, range and engage with 6 min par time. Rinse and Repeat. Covered about 4 miles in 5hrs over six stages.
Last edited:
We do, and in NH! Alderbrook FiRE match happened twice in 2023. Hopefully it keeps going into 2024.
What color is that ATX? Is it the elite sands color? Btw....do the ATX have qd sling attachment points?
My rifle shipped today and destined to be here tomorrow; if schedule permits and lgs is available there is a bif possibility i will bring her home tomorrow. They shipped the long forearm as well.
-Hinge
-Sling qd mount
-Bag rider
Still searching
-Hinge
-Sling qd mount
-Bag rider
Still searching
It is here guys. Cant wait to scope it and go out. Unfortunately forecast is rain all week but i will go anyways! Waiting for the scope, that is tomorrow. In just a bit will install the front rail, then will post a pic of something you all already own
It doesn’t shoot in the rain?It is here guys. Cant wait to scope it and go out. Unfortunately forecast is rain all week but i will go anyways! Waiting for the scope, that is tomorrow. In just a bit will install the front rail, then will post a pic of something you all already own
Well I guess this thread will be home for me on the Hide.
I took delivery of my AT-X in 6.5 Creedmoor with the sage green chassis a month ago.
I promise to read as much of this giant thread as I can before asking too many questions.
I took delivery of my AT-X in 6.5 Creedmoor with the sage green chassis a month ago.
I promise to read as much of this giant thread as I can before asking too many questions.
