Accuracy International AT-X

[redneckbmxer24]

I waited too long and the 6.5CM in dark earth is out of stock. EO and MH are not sure if a shipment of them will come in while the sale is still going on.

I have commitment issues. Maybe I'll just grab the 6CM version...

You can always sell the 6CM barrel and buy a 6.5 or trade it. The ATX barrels are very desirable on the second hand market and changing the barrel is as simple as loosening a a screw with a 4mm Allen and unscrewing it.

Or just buy the sage green if it’s still in stock since it’s the proper AI color anyway.

 

[skatz11]

I waited too long and the 6.5CM in dark earth is out of stock. EO and MH are not sure if a shipment of them will come in while the sale is still going on.

I have commitment issues. Maybe I'll just grab the 6CM version...

That’s how I ended up with 6mm CM. Mile High had one more 6cm in stock after I orders mine the other week.

I’m planning to get a 308 and 260 rem barrel eventually. Once I shoot out this 6mm CM I’m thinking of doing a 6mm BR or GT to keep a light recoiling 6mm in the rotation. The ease of barrel changes is one of the main reasons for the AT-X for me.

 

[xxflyingturtlexx]

I waited too long and the 6.5CM in dark earth is out of stock. EO and MH are not sure if a shipment of them will come in while the sale is still going on.

I have commitment issues. Maybe I'll just grab the 6CM version...

Get the 6cm and swap the barrel with someone in the community. I honestly like 6cm more but it is preference. You can sell the stock barrel 500-600 easy.

 

[6point5CM]

View attachment 8275532

First outing went well with the at-x. Broke in the proof barrel. Zeroed the mk5, which will likely be sold, I don’t know yet!

you know what that weighs as is? I'm trying to confirm if a 24" carbon will get me to the NRL hunter 16lb limit with bipod and a ZCO! I THINK it will but not with my can...

 

[xxflyingturtlexx]

you know what that weighs as is? I'm trying to confirm if a 24" carbon will get me to the NRL hunter 16lb limit with bipod and a ZCO! I THINK it will but not with my can...

I did a base calculation and without the bridge and nv rail; i am under 16 without a can; and that was going off getting numbers off the web. Mk5 choice was actually made after some consideration for nrl hunter next year. I will scale it this week and let you know.

 

[R.Walters]

@Scott Seigmund lookin good behind the ATX coated by Jon @weichelcoatings

 

[Milf Dots]

When can we expect LH AI AT-X rifles? tyia

 

[just browsing]

View attachment 8277945
@Scott Seigmund lookin good behind the ATX coated by Jon @weichelcoatings

Is that an enlarged ball handle on there? If so, what did you end up using?

 

[xxflyingturtlexx]

When can we expect LH AI AT-X rifles? tyia

I called them; and the person said “Ewwww” and hung up on me.

 

[sjbryan65]

About to order a hoptic saddle blanket for the ATX, which one fits it best the AX model or the AXSR?

According to the mile high pictures the AX is the one with one hole and the one I should get but they are out of stock and when I go to the hoptic website they seem to lump the atx in with the axsr...

 

[Stag556]

About to order a hoptic saddle blanket for the ATX, which one fits it best the AX model or the AXSR?

According to the mile high pictures the AX is the one with one hole and the one I should get but they are out of stock and when I go to the hoptic website they seem to lump the atx in with the axsr...

AXSR wouldn’t fit your needs. AX blanket works best. AXSR has two oval holes whereas the ATX/AX has one circular hole

 

[sjbryan65]

AXSR wouldn’t fit your needs. AX blanket works best. AXSR has two oval holes whereas the ATX/AX has one circular hole

Awesome. Thanks!

 

[Bullet_magnet]

Had my first trip out with the AT-X after getting my TBAC Ultra 9 approved.

I'm in love!

 

[hafejd30]

How heavy of a contour can you use on the ATX with full forend bridge?

Like MTU vs M24 contours

 

[TylerN]

How heavy of a contour can you use on the ATX with full forend bridge?

Like MTU vs M24 contours

Proof competition contour or anything thinner works.

 

[xxflyingturtlexx]

Compromising the little latch but have a solid thumb rest

 

[xxflyingturtlexx]

Debating on getting the short handguard, might have a dark earth handguard with upper rail and corresponding action rail for sale (still debating)

 

[AXMC]

View attachment 8281979

Compromising the little latch but have a solid thumb rest

Looks nice! Can you share details: Side shot, material, availability for purchase, etc?
Thanks

 

[diggler1833]

How heavy of a contour can you use on the ATX with full forend bridge?

Like MTU vs M24 contours

M24 gives no issues.

 

[6point5CM]

Looks nice! Can you share details: Side shot, material, availability for purchase, etc?
Thanks

Looks like an aluminum MBE. Google "MBE ATX thumb rest" and it should find some dealers.

 

[xxflyingturtlexx]

Looks nice! Can you share details: Side shot, material, availability for purchase, etc?
Thanks

MBE. It is aluminum. You can flip the folding stock to the left if you want it to click on to the chassis, i did not care about it and left it as is. I hardly fold it unless i have a lot of load in my backpack.

 

[efl15]

I have a 1.18" Spuhr and Leupold Mk5 7-35 on my AT. Thinking of getting an AT-X.

From what I've read, 1.18" might be too low even if not using a bridge?

 

[RUN8]

Yeah I’d plan on a taller mount if I were you.

I’m using a 28mm and my cheek riser is bottomed out to get a good sight picture.

 

[deadly0311]

I have a 1.18" Spuhr and Leupold Mk5 7-35 on my AT. Thinking of getting an AT-X.

From what I've read, 1.18" might be too low even if not using a bridge?

Realistically plan on a 1.5 at minimum.

 

[efl15]

Bummer! Oh well, If I get an AT-X, I'll definitely mount it and see how it feels. Thank you for the information!

 

[Stag556]

I put an AXSR stock onto my ATX. Anyone have an idea of the combo of parts needed for the female side of the folder to capture it while folded? The female end I have from a different AI isn’t tall enough to grab the male side.

 

[diggler1833]

I have a 1.18" Spuhr and Leupold Mk5 7-35 on my AT. Thinking of getting an AT-X.

From what I've read, 1.18" might be too low even if not using a bridge?

I'm using a 1.3" Badger mount on my AT-X, and I have my adjustable check on the first click up from bottom. I do clear the bridge with a 56mm objective, but probably wouldn't line up well if I had a rail attached and clip-on installed.

I wouldn't go with a 1.18" for sure. As others have stated 1.5" is good. I just like the aesthetics of a lower mount, and a 1.3" gives me that.

 

[TylerN]

I put an AXSR stock onto my ATX. Anyone have an idea of the combo of parts needed for the female side of the folder to capture it while folded? The female end I have from a different AI isn’t tall enough to grab the male side.

The parts look like this. My AXSR stock is a takeoff from an AICS chassis so I took off the locking pieces as well and transferred them over. Did the source of your stock not have the locking pieces or come with them?

 

[GenericBadGuy]

View attachment 8275532

First outing went well with the at-x. Broke in the proof barrel. Zeroed the mk5, which will likely be sold, I don’t know yet!

Just curious, what does it weigh without the bipod?

 

[Stag556]

The parts look like this. My AXSR stock is a takeoff from an AICS chassis so I took off the locking pieces as well and transferred them over. Did the source of your stock not have the locking pieces or come with them?

View attachment 8290524

Mine came from a chassis as well but your female piece seems to push out farther than mine does. Where yours extends slightly farther out, mine seems to be flush with the chassis, causing this.

 

[TylerN]

I put an AXSR stock onto my ATX. Anyone have an idea of the combo of parts needed for the female side of the folder to capture it while folded? The female end I have from a different AI isn’t tall enough to grab the male side.

The parts look like this. My AXSR stock is a takeoff from an AICS chassis so I took off the locking pieces as well and transferred them over. Did the source of your stock not have the locking pieces or come with them?

Mine came from a chassis as well but your female piece seems to push out farther than mine does. Where yours extends slightly farther out, mine seems to be flush with the chassis, causing this.

This might help, the plastic piece is mounted on a piece of hardware that pushes it our further and looks to be about the same distance that yours is short.

I took all the hardware off the chassis (not just that plastic piece) and moved it to my AT-X. Here's a picture to show what I'm talking about plus pictures of the stock closed and an AXSR closed.

 

[Woodland_Wolf_M81]

Aside from the PDF of the user manual, what are all these other folders and files on the USB drive that came with the AT-X?

 

[TylerN]

You've discovered the secret plans for the AT-X Gen69!!!



Or those are directory files MacOSX creates.

 

[Bullet_magnet]

Had a great day out at the range...really digging the vortex impact.

 

[xxflyingturtlexx]

Had a great day out at the range...really digging the vortex impact.

that place looks amazing

 

[adisan77ro]

Hi guys,
Do you have any idea if Low Vis Gear still produces this bag rider model? It no longer appears on their website and although I sent them a message both by email and on Facebook, they did not reply.
If you know that it is in stock somewhere, please give me a link.
Or maybe one of you has one for sale?

 

[TylerN]

Hi guys,
Do you have any idea if Low Vis Gear still produces this bag rider model? It no longer appears on their website and although I sent them a message both by email and on Facebook, they did not reply.
If you know that it is in stock somewhere, please give me a link.
Or maybe one of you has one for sale? View attachment 8299976

@96C might know

 

[Safety_3rd]

Hi guys,
Do you have any idea if Low Vis Gear still produces this bag rider model? It no longer appears on their website and although I sent them a message both by email and on Facebook, they did not reply.
If you know that it is in stock somewhere, please give me a link.
Or maybe one of you has one for sale? View attachment 8299976

That thing is sweet! I assume it’s steel to add some weight as well?

 

[Mr. F]

the Sawtooth ones are Re stocked last I checked. New option coming down the pipe too.

 

[Infidel4life11]

Left edge of the blue tape is tentatively where the cut will be made…….

16.5” rifle in the back ground for comparison.

16.5” proof carbon fiber ATX barrel en route.

 

[96C]

Hi guys,
Do you have any idea if Low Vis Gear still produces this bag rider model? It no longer appears on their website and although I sent them a message both by email and on Facebook, they did not reply.
If you know that it is in stock somewhere, please give me a link.
Or maybe one of you has one for sale? View attachment 8299976

Hey man,

Sorry... That is me, I've been struggling to stay on top of all manner of comms for a while with moving house and the run up to Christmas with a heap of new stock coming online... It's been absolute chaos, apologies.

Our good friend who manufactures these is actually in Antarctica on the summer rotation at the moment, so I took them off the website until he gets back and we get another run done! He won't be back until MARCH at this point.

He didn't tell us he was going, caught us off guard!
We will get more done but it'll be a few months sorry mate.

And yes, they are the most comfortable shape. Alloy so light. Shaped to not be a major snag hazard. Flat line bottom surface. Made in Australia. ADM170S clamp.

 

[adisan77ro]

Thank you for your reply, man.
I'm glad to know that it will be back in stock at some point. I remain interested in buying one.
If possible, please give a sign here when it can be ordered again.

 

[GenericBadGuy]

Hey man,

Sorry... That is me, I've been struggling to stay on top of all manner of comms for a while with moving house and the run up to Christmas with a heap of new stock coming online... It's been absolute chaos, apologies.

Our good friend who manufactures these is actually in Antarctica on the summer rotation at the moment, so I took them off the website until he gets back and we get another run done! He won't be back until MARCH at this point.

View attachment 8300436

He didn't tell us he was going, caught us off guard!
We will get more done but it'll be a few months sorry mate.

And yes, they are the most comfortable shape. Alloy so light. Shaped to not be a major snag hazard. Flat line bottom surface. Made in Australia. ADM170S clamp.

Is that a custom atx chassis color?

 

[96C]

Is that a custom atx chassis color?

No, this is the nice royal blue that was available at the time, with a filthy rattle can olive green over the top, it's horrible ... Until I decide what colour to cerakote it.

 

[hafejd30]

Hey man,

Sorry... That is me, I've been struggling to stay on top of all manner of comms for a while with moving house and the run up to Christmas with a heap of new stock coming online... It's been absolute chaos, apologies.

Our good friend who manufactures these is actually in Antarctica on the summer rotation at the moment, so I took them off the website until he gets back and we get another run done! He won't be back until MARCH at this point.

View attachment 8300436

He didn't tell us he was going, caught us off guard!
We will get more done but it'll be a few months sorry mate.

And yes, they are the most comfortable shape. Alloy so light. Shaped to not be a major snag hazard. Flat line bottom surface. Made in Australia. ADM170S clamp.

What thumb shelf model is that? Anarchy has them for AT or AX

 

[Infidel4life11]

 

[mark5pt56]

View attachment 8301607
View attachment 8301609

I would either cut in between the 3rd and 4th slot from the front at a 90 or from the top of the top cover at an angle that intersects the 4th slot, the screw hole then back to 90 to the bottom or continue the angle.

or this one, didn't save, dang it-just follow the red line to the top, should line up with forward edge of the top cover

 

[Infidel4life11]

I would either cut in between the 3rd and 4th slot from the front at a 90 or from the top of the top cover at an angle that intersects the 4th slot, the screw hole then back to 90 to the bottom or continue the angle.

or this one, didn't save, dang it-just follow the red line to the top, should line up with forward edge of the top cover

Red line cut is #1 pick right now.

 

[Homelander]

Hey all, I've seen a few folks swap over to AXSR stocks on ATX rifles and was curious why? Folding hinge? I was seeing it was possible to make a AXSR hinge work on these and still retain the ATX stock. Loving mine so far. TIA

 

[TylerN]

Hey all, I've seen a few folks swap over to AXSR stocks on ATX rifles and was curious why? Folding hinge? I was seeing it was possible to make a AXSR hinge work on these and still retain the ATX stock. Loving mine so far. TIA

Ha! Look at this guy... He doesn't have an AXSR stock!

I already had the AXSR stock available from a chassis so I figured why not and swapped it. It doesn't do anything really better other than adjust without tools and look cool.