Accuracy International Picture Thread

[trob_205]

Rust-oleum Nutmeg is a perfect match

Rust-Oleum Painter's Touch 2X 12 oz. Satin Nutmeg General Purpose Spray Paint 334076 - The Home Depot

Upgrade the look of your indoor or outdoor space by applying this highly durable Rust-Oleum Painter's Touch 2X Satin Nutmeg General Purpose Spray Paint.

www.homedepot.com

Hell..yeah!! That beats $100-150 cerakote jobs lol 90% of the barrel will be covered by the hand guard so I’m not worried about it being super durable.

 

[Huskydriver]

Hell..yeah!! That beats $100-150 cerakote jobs lol 90% of the barrel will be covered by the hand guard so I’m not worried about it being super durable.

If you use a good primer, it's actually very durable

 

[trob_205]

If you use a good primer, it's actually very durable

Sounds like you have experience @Huskydriver . What primer do you recommend? BTW I half ass regret the rail trade after the 16.5” wants lol. I just got the 13” Victor Rail in the mail and I’m a fan so all is well!

 

[Huskydriver]

Sounds like you have experience @Huskydriver . What primer do you recommend? BTW I half ass regret the rail trade after the 16.5” wants lol. I just got the 13” Victor Rail in the mail and I’m a fan so all is well!

Just gave the barrel a good wipe down with a scotch pad with acetone then used the rust-oleum high temp primer

 

[whiskeytower]

Some really nice rifles in this thread. I don't post many pics, but I took this pic for another thread so thought Id share here as well. 300 WM a buddy built for me a couple years back on the M2013 action.

 

[Tex68w]

Green thumbhole plastics FTW!!!

 

[Sniperwannabee]

Hell..yeah!! That beats $100-150 cerakote jobs lol 90% of the barrel will be covered by the hand guard so I’m not worried about it being super durable.

Here my barrel after taking huskydrivers recommendation and using satin nutmeg

 

[trob_205]

View attachment 7589373

Here my barrel after taking huskydrivers recommendation and using satin nutmeg

That does it. I’ll hit up Home Depot this weekend!

 

[M8541Reaper]

FYI...
EuroOptic just added some AX LE 20MOA action rails to their site.
Going to assume that these are long action so you can run 20MOA on your #Discontinued AXMC and pop on the new AXSR RRS forend for the continuous cant.
...Thus giving you at least a taste of the AXMC LE style setup.

#ProbieBobWhoShouldBeIssuedAWoodenPistolAndBarelyQualedOnEveryIssuedWeaponLetAloneCantPushHisBodyOffTheGroundRatesTheAXMCLEButNoOneElseDoesBecauseItIsNotForFilthyCommoners

 

[The Durk]

I love me some shooting, but I hate me some load development on a new lots of powder. Roughly MOA with fliers thrown in. Going to play with seating depth tonight.

 

[hic28]

BecauseItIsNotForFilthyCommoners

Lol

 

[Gamikatsu]

I can't get enough of this rifle...

 

[FB67]

I rarely post on here but have been learning and enjoying others members experiences for some time. I was fortunate to get a AI from a member on here and wanted to share.

 

[powdahound76]

Hmmm. Slick set up.
nice toolboxes too.

 

[xXlojackXx]

Does anybody know the AT/AX action screws thread pitch off the top of their heads?

 

[blbennett1288]

I love me some shooting, but I hate me some load development on a new lots of powder. Roughly MOA with fliers thrown in. Going to play with seating depth tonight. View attachment 7589461View attachment 7589462

What powder you running?

 

[samb300]

Does anybody know the AT/AX action screws thread pitch off the top of their heads?

M5x0.8

 

[xXlojackXx]

M5x0.8

Thanks amigo!

 

[The Durk]

What powder you running?

Not to get off topic because this is a pic thread but VV N150, and Varget. I like the speed of Varget but I'm getting primer cratering at 44.1 grains. VV I'm at compressed loads at the same grain weight with no pressure sign but it's about 50 FPS slower.

 

[Longshot85]

Not to get off topic because this is a pic thread but VV N150, and Varget. I like the speed of Varget but I'm getting primer cratering at 44.1 grains. VV I'm at compressed loads at the same grain weight with no pressure sign but it's about 50 FPS slower.

Good to know

I'm no expert by any means but throwing this out to anyone interested.

I've had GREAT luck out of IMR 4451.

26 inch 6.5cm sending 147 ELD's at 2858 fps with 9 inch form 1 can

 

[Sniperwannabee]

Not to get off topic because this is a pic thread but VV N150, and Varget. I like the speed of Varget but I'm getting primer cratering at 44.1 grains. VV I'm at compressed loads at the same grain weight with no pressure sign but it's about 50 FPS slower.

308?

 

[The Durk]

Yup 308. Peterson SRP brass, and Fed 205m's.

 

[BuLLet]

Took my son bowling on Sunday. Instead of balls we used Amax 750 grainers

Some of the jackets were left in the pins...

Entrance holes

Exit Holes

 

[Sniperwannabee]

Took my son bowling on Sunday. Instead of balls we used Amax 750 grainers

Some of the jackets were left in the pins...

View attachment 7589627

View attachment 7589628

Entrance holes

View attachment 7589629

Exit Holes

View attachment 7589630

I would have expected more damage

 

[xXlojackXx]

I would have expected more damage

Takes something much harder and thicker to open up a 750 grainer

 

[Gamikatsu]

Yup 308. Peterson SRP brass, and Fed 205m's.

I think I know where those 205Ms came from.....

 

[Heffo]

Not to get off topic because this is a pic thread but VV N150, and Varget. I like the speed of Varget but I'm getting primer cratering at 44.1 grains. VV I'm at compressed loads at the same grain weight with no pressure sign but it's about 50 FPS slower.

My 175OTM var get load is 44.8 (Lapua brass & not an AI), you may find another node around 43.5gr.

 

[The Durk]

VV N150 .045 off the lands is magic.

 

[blbennett1288]

@Mr. F @NoLegs24

Any update on the Sawtooth Dovetail Plates?

 

[hic28]

@Mr. F @NoLegs24

Any update on the Sawtooth Dovetail Plates?

R-Lock/Arca Dovetail Plate: Accuracy International AX Low Profile

Low Profile R-Lock Dovetail plate for AX, AX AICS rifles and chassis to include Mk13. Fits RRS 1.5" R-Lock Dovetail and Arca-Swiss.

www.sawtoothrifles.com

 

[RG0099]

R-Lock/Arca Dovetail Plate: Accuracy International AX Low Profile

Low Profile R-Lock Dovetail plate for AX, AX AICS rifles and chassis to include Mk13. Fits RRS 1.5" R-Lock Dovetail and Arca-Swiss.

www.sawtoothrifles.com

NICE!!!

 

[blbennett1288]

R-Lock/Arca Dovetail Plate: Accuracy International AX Low Profile

Low Profile R-Lock Dovetail plate for AX, AX AICS rifles and chassis to include Mk13. Fits RRS 1.5" R-Lock Dovetail and Arca-Swiss.

www.sawtoothrifles.com

Yes, I preorder 2 in mid February and was wondering the status since March is almost over.

 

[hic28]

Correction, what @blbennett1288 said below.

 

[blbennett1288]

They are still being anodized. Matt hopes to get them back next week.

 

[BLKWLFK9]

Well, I sold my ARC match rifle this week so I'll be strictly rocking the AI for the foreseeable future. Makes things easier with 1 gun to choose from. Now, my only decision will be dasher, 25cm, 6cm, or 6.5cm barrel.

 

[Longshot85]

Well, I sold my ARC match rifle this week so I'll be strictly rocking the AI for the foreseeable future. Makes things easier with 1 gun to choose from. Now, my only decision will be dasher, 25cm, 6cm, or 6.5cm barrel.

Choices ....choices

 

[J-Ham]

Well, I sold my ARC match rifle this week so I'll be strictly rocking the AI for the foreseeable future. Makes things easier with 1 gun to choose from. Now, my only decision will be dasher, 25cm, 6cm, or 6.5cm barrel.

You didn't sell that rifle, dude, you gave it away, haha! But, sometimes ya just need car parts, man!

 

[JB.IC]

Anyone a gunsmith in here or know a gunsmith I can ask some questions about the AXMC/AXSR?
Curious how much space is supposed to be between the bolt/breech ring and the barrel face. Was talking with a gentleman about it and it had me wondering what the correct space is. We were talking about the differences in a standard two lug and the breech ring.

 

[BLKWLFK9]

You didn't sell that rifle, dude, you gave it away, haha! But, sometimes ya just need car parts, man!

I wanted it to go fast but didn't expect 14 minutes. And the guy that bought it couldn't have been a better person to get it for a good deal. His 1st PRS rifle. Im happy about it

 

[Sniperwannabee]

Anyone a gunsmith in here or know a gunsmith I can ask some questions about the AXMC/AXSR?
Curious how much space is supposed to be between the bolt/breech ring and the barrel face. Was talking with a gentleman about it and it had me wondering what the correct space is. We were talking about the differences in a standard two lug and the breech ring.

adam at mile high

 

[Krob95]

MHSA should be able to help you out since they sell them and service them

 

[RS14]

I wanted it to go fast but didn't expect 14 minutes. And the guy that bought it couldn't have been a better person to get it for a good deal. His 1st PRS rifle. Im happy about it

First world problems. lol

 

[Heffo]

Well, I sold my ARC match rifle this week so I'll be strictly rocking the AI for the foreseeable future. Makes things easier with 1 gun to choose from. Now, my only decision will be dasher, 25cm, 6cm, or 6.5cm barrel.

Been thinking about doing the same. Want too....but just can’t part with some!!

 

[Dendro]

Thought I would share. Got the old AWSM out over the past weekend. Shot out to 1750. Was a little rough using 250gr scenars at 2938fps.

What pack is this? Thanks

 

[BEJ762]

What pack is this? Thanks

If I remember right, it’s a Kifaru Shape Charge with their Sherman pocket mounted. It’s a good pack size for range use.

 

[Dendro]

If I remember right, it’s a Kifaru Shape Charge with their Sherman pocket mounted. It’s a good pack size for range use.

Thanks man, looks like the perfect size for what I need.

 

[J-Ham]

I run a Shape Charge & am very happy with it. It's got internal MOLLE on the back panel & very little internal organization, but that's exactly what I wanted.

 

[The Durk]

I blame NoLegs for the scope chaps.

 

[hic28]

Yes, I preorder 2 in mid February and was wondering the status since March is almost over.

Quit polishing your ham candle, they’re shipping monday

 

[Fixr]

Quit polishing your ham candle, they’re shipping monday

View attachment 7591154

Nice! Are all of those spoken for already?